HT3805 Sudden problem: Adjustment panel blank (metadata and library OK). Thumbnail shown as file loads but then image has dark blue cast and is not adjustable. Have current version of Aperture running. Help please
Aperture Help needed: Adjustment panel is blank, although metadata and library panels normal. Thumbnails appear normal but when RAW (CR2) file is loaded, it appears with a dark blue cast, and does not load into the adjustment panel, and is not adjustable. Suggestions please
You may need to register your camera with the the launch service database again, see this post by Alan Roseman: Re: Aperture 3 preview of raw file greenish
There is a "typo" in the command given in the link above, so read also the following posts on how to correctly enter the command and how the fix is supposed to work
Good luck.
Post back, if this does not help.
Regards
Léonie
Similar Messages
-
I was having some problems with my mac, safari and itunes was freezing alot. I have to force shutdown and when I tried to start up again i get to the login page, type in my password and it starts to load, but then the screen turns blue for a few seconds and it goes back to the log in screen. What should I do?
Please Help!!Somewhat similar problem:
Put in the password, hit enter, the screen goes blue for half a second, then goes back to login screen and carries on logging in as usual. Drives me mad. It doesn't happen with a fresh Lion installation, nor if booted into safe mode. On the machine in question it also happens to new user accounts.
I've removed all login items, including Startup Items and Launch Demons (pun intended) and Agents, I've compared system login plists with a fresh Lion installation - can't see differences. I've removed Little Snitch and PeerGuardian (no more third party kexts).
@Carolyn: I've done disk maintenance with DiskUtility and fsck and even DiskWarrior, cleaned caches, etc. etc.
Any ideas would be gratefully received.
Sorry for trying to hijack the thread (as it's not about Lion), but it seemed dead anyway. -
When I get to the login page on my macbook, I type in my password and it starts to load, but then the screen turns blue and it goes back to the login.
Iv tryed this numerious times still keeps going back to pasword. Can not get any further. Tried restart holding shift key.. still nothing. What do i do?Thank you for your help.
I couldnt get to the hard drive/ desktop. Soft login not even working. So i could not do any of that.
In the end i took it to Apple and its actually the hard drive on its way out. A common issue with that series of Mac. Funny seeing i dont use this mac much. However being 2.5 years old and out of warrently, Apple have recognise this issue with this series/ Model and installing a new hard drive at no cost.
Very luck and greatful. And not feeling so dumb that it was something i did or could troubleshoot myself.
Hope this helps others that it just might be your hard drive failing. -
i am a new mac user and tried to update my firefox but now i have multiple foxes and a half fox fix something? how do i get it all together in one and be sure i have current version on only?
Hi there
I think in this case, you may be best to speak with Microsoft about this, as it does seem like an issue with Office, and not your Mac.
Follow this link, to find your local Microsoft Support contact number.
Or perhaps create a new topic in the Microsoft Support Communities
Good luck -
when I try to install Adobe Reader, I get a legend, like I have a newer version and is not, I have no version installed, I'm from South America, if someone can answer me in Spanish, I'm going to thank
Assistant screenshot
adjunto captura de pantalla
2015-05-02 14:30 GMT-03:00 RahulTyagi4you <[email protected]>:
when I try to install Adobe Reader, I get a legend, like I have a
newer version and is not, I have no version installed, I'm from South
America, if someone can answer me in Spanish, I'm going to thank created
by RahulTyagi4you <https://forums.adobe.com/people/RahulTyagi4you> in *Acrobat
Reader* - View the full discussion
<https://forums.adobe.com/message/7505705#7505705> -
It stopped chargin and now is not being recognized by my computer, it says that the device has malfunction. It also is stuck in recovery mode but since it is not recognized by my computer it does not appear in iTunes either.
- See if placing the iPod in DFU mode will allow iTunes to see the iPod.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- Try another cable
- Try different USB ports
- Try another computer.
- Last, make an appointment at the Genius bAr of an Apple store -
I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.
Artist: Imagine Dragons
Album: Night VisionReport it here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?
If your MBP is under warranty, bring it to an Apple store and have the technicians fix it. If not, try the steps in this support article:
http://support.apple.com/kb/ts2570
Ciao. -
Please show us the video tutorial for this because i am having so much problem with my iphone5 bluetooth and can not send any file . So plz plz help me
You have to use airdrop which is on iOS 7
-
youtube loads but then when i click on a video it doesent play. it worked fine the other day and in the past and suddently it doesnt work. please help!!!!!!
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I changed the name of my apple id and now I can't use the app store on my phone correctly because it's using my apple id's old name. I signed out and in on itunes and synced my iphone. Still doesn't work. Help please?
Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.
Note: Apps are forever tied to the Apple ID used to originally obtain them. They cannot be updated using any other Apple ID other than the one they were originally obtained with. -
Disappointed with IOS7, i had organized my music library as per the Genre and now im unable to hear all the songs of the same genre like in the earlier versions. The options of "all albums" and "all songs" are missing in this version of IOS. Help Please..
It would be nice if you told others the steps you've tried and/or how you used to have your setup.
Anyway have you tried tapping MORE this will then bring you to
the selection-list of Audiobooks, Genres, Compilations & Composers.
Selecting Genres gives you a list of all your music split into genres which was set within the Music downloaded via iTunes or uploaded from CD or which you may have set yourself.
Then you just select the Genre you want:
If certent songs are not correctly gategorised you may need to go into iTunes and reselect via Get-info
>Info>Genre and change it there. That way you should end up with all songs of Jazz or other in 1 place. -
Bought a new macbook and want to manually manage music onto my iphone 4s (as it is already full of music from old windows laptop) but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!
Before you sync your iPhone make sure that all the music that was synced to your phonereviously has been copied to your iTunes on the new MacBook Pro. Then when you connect your phone you will be able to either sync all music or select only those playlists that you want on the phone.
-
I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them. -
I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.
we have a same problem
Maybe you are looking for
-
How do I stop firefox from offering to remember my passwords?
I do not want ANY program to offer to remember ANY of my passwords. Firefox REPEATEDLY asks to remember this information any time I log in to work or personal sites. I am quite capable of remembering my own passwords, and the pop-up key icon is reall
-
New to Acrobat. Have 9 Professional 9.1.3. How can I create the same forms in different layers at 1 page document? For example: you open the file, see the first layer with the forms, fill them, click the button to check forms for completeness and cor
-
How to start a AT PSU whitut mobo
How do i start a AT PSU by not using a mobo? I know how do to it with a ATX, buy i dont got any free ATX for my project... It is by using a wire and the 20 pin, right?
-
Hi All I've got a clean install of leopard client, and leopard server, both running 10.5.1. A PHD on my laptop goes through it's checks, auto resolves and compares the files without a problem, and even give's we the option of resolving conflicts manu
-
Oracle cannot load areasQueries
When trying to load oracle.server, 9.2.0.1.0, on Compaq laptop with XP Professional, I get this eror repeatedly: *** Error Dialog: There was an error during loading library : areasQueries *** Can anyone provide suggestions on how to remedy - Thanks D