HT3819 can I use two or more Apple Tvs on one network?

I have two Apple TVs on my network, one in a basement cinema and the other in the ground floor TV room - if I use the one in the basement, then stop using it and then later in the day try and use the one in the TV room I get an error message asking me to turn on home sharing. I have to go upstairs to my MAC turn home sharing off and then on again for the second Apple TV to work. The same thing happens if I subsequently try and use the Apple TV down in the basement. I am not trying to use them both at the same time. Does anyone know if I can run two (or more) Apple TVs on the same network and if so how do I get around the home sharing error I keep getting? Thanks!

Of my 7 Apple TV's only one is connected by ethernet, they all work as expected, more often than not at the same time (I probaly haven't had 7 running at the same time, it depends on who's using what))

Similar Messages

Two or more apple TVs to one account?

Is it possible to have two or more Apple TVs in the same household that are tied to one account? I'm assuming if that is true, then the content linked to my account should be shared between both Apple TVs as well. Correct?
Thanks in advance for the help.

Hi,
this should not be a problem.
https://discussions.apple.com/thread/4471580?start=0&tstart=0

Can I use two or more seperate Apple ID accounts on Apple TV? Everyone in my family has a different account.

Can I use two or more Apple ID accounts on the new Apple TV? Everyone in my family has a seperate account.

Of my 7 Apple TV's only one is connected by ethernet, they all work as expected, more often than not at the same time (I probaly haven't had 7 running at the same time, it depends on who's using what))

Two Apple TVs on one network and iPad remote

I am currently running a second gen Apple TV in my living room and would like to add a second one to my bedroom running on the same wireless network. Is it possible to manage both from the same iPad remote application?

Welcome to the Apple Community.
Yes you can add additional Apple TVs to your remote app (indeed it will add them itself)

Can I use two FP-AO-210's and one FP-1000 to obtain 16 channels of analog output?

Hello All,
I'm new to both Fieldpoint and LabVIEW.
I'm developing a control system that requires at least 9 channels of analog-only output. I have been trying to connect two FP-AO-210's to a single FP-1000 by connecting one FP-AO-210 directly to the FP-1000, and the second FP-AO-210 to the first FP-AO-210. However, Fieldpoint Explorer only detects the network interface and the first analog output module.
Is this configuration correct? Or, do I need a FP-1001 in order to use a second FP-AO-210?
Does anyone have any alternate suggestions on how to obtain at least 9 channels of analog output?
Thanks,
Eric W

Eric,
One FP-1000 (or FP-1001/160X/20XX) can control up to 9 IO modules. If the second FP-AO-210 is not being detected by FieldPoint Explorer there are a couple things to check. First check to make sure that all of the terminal bases and modules are firmly connected to each other.
Next, check the Power & Ready LED of the FP-AO-210 at address 2. Both LEDs should be lit. If they are not, de-power the system, remove the modules and terminal bases and make sure that you do not have any bent pins. Re-assemble and power up the system. Use FieldPoint Explorer again.
If the module is still not detected, take a look at the addressing of the detected modules. The system should be detecting the first FP-AO-210 at address 1 (or 1 + a multiple of 10 if you have s
et the FP-1000 to a different address). If the FP-AO-210 is at a different address, then it is likely a problem with the addressing circuitry either in the network module or the terminal base. Try swapping the positions of the two terminal bases and try again. If it works, then the error is in the addressing circuitry of the terminal base, if not, then it is in the addressing circuitry of the network module. Note: bent pins can also cause this.
Regards,
Aaron

Can you have two apple tvs on one wireless network?

Can two or more Apple TVs exist on one wireless newtork?

No, in this case the 2 user accounts with its own Apple IDs would be completely seperated.
If you want to share this things like music and app purchases you will have to to something else.
1. Create two user accounts on your Mac (user A and user B).
2. Create two iCloud accounts just for Mail, Contacts, Calendars, Photos, etc. (one for user A and one for user B):
On your Mac (with Mac OS X Lion or Mountan Lion):
Settings > Mail, Contacts, Calendars > iCloud > Create an Apple ID (button in left corner)
On your iPhone, iPad or iPod touch (iOS 5 or later):
Settings > Mail, Contacts, Calendars > Add Account > iCloud > Get a free @me.com address and create a new Apple ID
3. It is not recommended because you shouldn't share your Apple ID account information with other people but you could set up your old Apple ID as an account just for store purchases (Apps, Music, ...) so that everyone of you can manage the purchases in their own library (Access is limited to 10 devices). Therefore you have to setup this "old" ID in Settings of your iOS devices (Settings > iTunes & App Store) and in iTunes on your Mac.

Can i use two apple tvs with one itunes account?

can i use two apple tvs with one itunes account?

yes and you can use more then 2
just don't give them the same name

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Can I use two apple TVs in different locations in the same house?

Can I use two apple TVs in different locations in the same house?

Welcome to the Apple Community.
You can use 2 or more Apple Tv's in different locations in the same house. You can even use them at the same time and watch the same content on each or choose different content.

Can we use two separate apple ids on one laptop to upgrade apps

can we use two separate apple ids on one laptop to upgrade apps

Welcome to the Apple Community.
Only if you use two separate user accounts.

HT204053 If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?

Each user account may have its own Apple ID.

HT5622 Can I use two Apple ID account in one device. Are there irregularities

Can I use two Apple ID account in one device. Are there irregularities

You can use one ID for iTunes/iTunes Match, and another for iCloud, without any problems. You can add a secondary iCloud account in System Preferences (or Settings)>Mail, contacts and Calendars. Its data will appear alongside the main iCloud account though you cannot use PhotoStream with it.

Can i use two iphone user for a single apple ID to download apps from iTunes?

can i use two different iphone for a single apple ID to download apps from iTunes?

You can use as many iPhones as you want, there is no limit to the number of devices that can sync to an iTunes account.

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can I use two accounts ?

How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

HT3819 can I use two or more Apple Tvs on one network?

Similar Messages

Maybe you are looking for