HT3819 I can not get my home sharing up and running

I have done all the stuff to set up home sharing, turned it on with the same details, autherised the computer but we still have not got the home icon to click on. can anyone help?

Howdy hays300,
To troubleshoot this issue where you are unable to see your other computer's Home Sharing library, please follow the troubleshooting in the article below.
Troubleshooting Home Sharing - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Similar Messages

  • HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

    I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
    I am able to get the 'Home sharing' 'user and password on my Mac.
    Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
    However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
    When I give the same password, it is rejected.
    Help!!!!
    Jaxxdiggs

    Personally I think the iOS devices are poor at reconnecting  - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
    Something along those lines anyway.
    I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
    AC

  • After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store.

    After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store. Any clue why?
    Regards,
    Maciek

    Click the round flag icon bottom right corner of the App Store window.

  • HT4623 I can not get past the license agreement and term and conditions page after updating my i5 IOS

    I can not get past the license agreement and term and conditions page after updating my i5 IOS

    Restart your phone and if that doesn't help, reboot the device.
    Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

  • I CAN NOT GET PSE 11 TO INSTALL OR RUN. I PURCHASED THE UPGRADE

    I CAN  NOT GET PSE 11 TO INSTALL OR RUN

    It appears to have loaded and there are two pse icons for pse 11.  I am using windows and pse 11 will not open.
    Sent from my iPhone

  • My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean?  And how can I get my computer back up and running normal?

    My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean?  And how can I get my computer back up and running normal?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk.
    http://support.apple.com/kb/PH5836
    Reset PRAM.
       http://support.apple.com/kb/PH14222

  • I had to change my email acct and do not have access to the original one my icloud, iTunes,etc have. I changed it and signed out and was able to successfully change to the new email on iTunes and Apple ID. However, I can not get icloud to change over and.

    I can not get icloud to let me change the email to my new acct???

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Can't get iTunes "Home Sharing" to work...

    Before we switched to FIOS, we had Comcast and the Home Sharing on iTunes worked fine.  Now, some setting must be different because I can't get the libraries from 2 different computers to "talk" to each other.  I have all the settings in iTunes correct, but each doesn't "show up" on the other's network.
    Any suggestions?

    Log into the router and select the Advanced settings.  There's a item to dump the router configuration on that screen -- it'll download a file to your PC-- you can just open it with Notepad is it's just a text file.

  • HT4352 Lost my remote to my Apple TV and I can not turn on home sharing w/o it.  Does this mean I need to purchase a new apple Tv

    Lost my remote to my Apple TV. Downloaded the remote app to my iPhone but you need to have home sharing turned on the Apple TV to use this. Does this mean I need to purchase a new Apple TV?

    Any code association only applies to 1st gen Apple TV.
    Again, the remote app will need home sharing enabled on the APPLE TV. They also need to be on the same wifi network. The OP has a new network.
    Using unsupported apps or modified devices are not permitted for discussion here.

  • New Build can not get past 2E on debug and 2A on dashboard

    I have a new build - Big Bang, I7 -950,  Corsair  xms3  8gb 2 X 4, Radeon HD 5770 HD-577A-ZN, WD Caviar Green 1 TB, Liteon 24X DVD,  Ultra X4 750 W modular power supply, 932 HAF Case.
    When I boot I can't get past 2E on the debug and 2A on the dashboard and nothing on the monitor.  I have removed everything and replaced it and checked the pins on the processor which are good to go and still  comes up with 2E and 2A   

    Quote
    Corsair  xms3  8gb 2 X 4
    What's the story on the RAM? Dual Channel?  Please provide specific specs, timings, recommended voltage, etc. With an i7 950, presuming this is an Xpower Big Bang & not an 1156 socket variety.

  • Can not get past grey apple logo and spinning spokes ?

    I've tried holding down keys (command-s,option,c ...etc) but it just stays on the spinning and there are no sounds ie chimes.
    I've tried booting into osx disk holding the c key and it takes a little longer for the apple logo and spinning wheel to come up but eventually it goes right back into the spinning and I've waited out the spinning for ten to fifteen minutes with no luck.
    The harddrive looks healthy when plugged in externally to my Win7 machine, I've tried moving the memory sticks around with no luck.
    I'm trying to fix this for a friend , there are two actual keys missing the f5 and the #6 key (broke off I guess).

    Ptown wrote:
    Thanks for replying , I'm pretty sure my friend does not have the hardware test disc that came with his macbook pro 06 anymore but I'll ask.
    Yes.
    Is there anything else I could do to solidify that the logic board is toast ?
    If no AHT, make an appt with the "genius" bar at an Apple Store.
    I would think that I wouldn't get anything (black screen) if it was the logic board.
    The LB basically "controls" everything, so depending on what circuits have issues, a bad LB could account for (almost?) any symptom.
    RAM is also a suspect here. It sounds like you did some troubleshooting, but if both modules are third-party (not the original Apple-supplied) RAM, see if the original RAM can be found and tried.

  • Can not get the alignment to happen and load new OfficeJet 7500A

    Just bought Office Jet 7500A 4 in one wife format printer got everything out and ready to go and relized I had plugged in the usb cable un plugged everything and started a gain but to no avail. please help what can I do loaded the software to the connect and it won't read?
    Anything would be most appreciated have a art show to go to this friday!!!!!!!!!!

    Hi,
    Please unplug any USB and remove any Cartridges and the printhead from your printer.
    Turn the printer Off and then On again, follow the on-screen directions.
    Make sure not to insert any printhead or cartridge till being asked to do so,
    If during the steps any part is not being recognized correctly, power cycle the printer
    Please let me know if you may see any progress or if there is any print performed during the alignment.
    As well, if any particular message appears, please let me know the error.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Using windows vista I can not get the install to complete and work properly with a usb connection.

    I am running Vista (32 bit) and I was trying to update to new HP software.  Tried using full software install from file on HP website (release 14.0 full version).  When I try to install, it will not recognize the usb connection of the software.  I tried going back to version that came with the printer and had a similar problem.  Now I am stuck not being able to get either version 12 (which came with the system) or version 14 (new update on website).
    I need help trying to figure out how to get the software to go through and connect properly using usb and having the scan function working.......
    Any ideas.

    Hi,
    Have you tried plugging the USB into a differnt port at the back of your PC?
    IS the USB directly connected to your PC and not through any USB hub or extention?
    Do you see any response while plugging the USB to your computer?
    If yes, please clarify.
    I would also suggest trying a different USB cord, not longer than 2-3 meters long and check for any difference.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I can not get my safari to quit and I am unable to logout or restart my computer.

    I just recently upgraded to Snow Leopard and than Lion. Since that time I am only able to put my computer to sleep. My safari is always open. I go to the dashboard to quit and clicking on quit does nothing. Also, if I click on safari at the top of the page Quit Safari is greyed out. I have also went to restart to see if this would fix the problem. However, when I go to do that it tells me to quit safari. So, the only other thing I can think of is to hard shut off the computer. But I would like to know if there are any better options. Also, I know with PC's you can due ctrl+alt+del and close programs that way. I've had my mac for over 3 years, but don't really know how to do that in mac terms. I haven't really ever had problems before. If someone has any recommendations I would appreciate it.
    Thanks!

    Press the Option, Command, and Escape keys, select Safari, and click on Force Quit.
    (62398)

  • Still can't get the procedure to compile and run

    Sorry still having issues.
    Here is the whole sql, but I seriously suspect the problem is in the beginning somewhere, with one of the declarations.
    Any help would be appreciated. Since I can get this to run without a stored procedure ( all except the execute immediate statement ), then I assume my logic is ok, but as I said, something is wrong near the top.
    Thanks ,
    Floyd
    The sql is:
    spool proc.err
    CREATE OR REPLACE PROCEDURE floydw.loadtable_config AS
    i pls_integer ;
    sql_stmt VARCHAR2(4000);
    all_names VARCHAR2(4000);
    all_names2 VARCHAR2(4000);
    TYPE typ_coltab IS TABLE OF dba_tab_columns%ROWTYPE INDEX BY pls_integer;
    coltab_table typ_coltab ;
    coltab_table2 typ_coltab ;
    coltab_rec dba_tab_columns%ROWTYPE ;
    CURSOR cur is SELECT *
    FROM dba_tab_columns where owner='GWSTAGING_SENTRYPROD' and table_name='CONFIG' ;
    BEGIN
    i := 0 ;
    OPEN cur ;
    LOOP
    FETCH cur into coltab_rec ;
    exit when cur%notfound ;
    i := i+1 ;
    coltab_table(i) := coltab_rec ;
    coltab_table2(i).column_name := '"' || coltab_table(i).column_name || '"' ;
    END LOOP;
    all_names := NULL;
    all_names2 := NULL;
    FOR j IN 1 .. i
    LOOP
    all_names := all_names || ',' || coltab_table(j).column_name;
    all_names2 := all_names2 || ',' || coltab_table2(j).column_name ;
    END LOOP;
    all_names := SUBSTR (all_names, 2); -- Remove ', ' from beginning of list
    all_names2 := SUBSTR (all_names2, 2); -- Remove ', ' from beginning of list
    sql_stmt := 'insert into ' || coltab_rec.table_name ||' (' || all_names || ') SELECT ' || all_names2 || ' FROM "config"@sentry_l ;' ;
    --dbms_output.put_line ('executing ' || sql_stmt) ;
    execute immediate sql_stmt ;
    END;
    If I try to create it as is, I get:
    SQL> show errors
    Errors for PROCEDURE FLOYDW.LOADTABLE_CONFIG:
    LINE/COL ERROR
    7/3 PL/SQL: Item ignored
    7/31 PLS-00201: identifier 'DBA_TAB_COLUMNS' must be declared
    10/14 PL/SQL: Item ignored
    10/14 PLS-00201: identifier 'DBA_TAB_COLUMNS' must be declared
    11/18 PL/SQL: SQL Statement ignored
    12/8 PL/SQL: ORA-00942: table or view does not exist
    18/5 PL/SQL: SQL Statement ignored
    18/20 PLS-00320: the declaration of the type of this expression is
    incomplete or malformed
    21/5 PL/SQL: Statement ignored
    LINE/COL ERROR
    21/24 PLS-00320: the declaration of the type of this expression is
    incomplete or malformed
    22/5 PL/SQL: Statement ignored
    22/22 PLS-00487: Invalid reference to variable
    'DBA_TAB_COLUMNS%ROWTYPE'
    30/7 PL/SQL: Statement ignored
    30/56 PLS-00487: Invalid reference to variable
    'DBA_TAB_COLUMNS%ROWTYPE'
    LINE/COL ERROR
    31/7 PL/SQL: Statement ignored
    31/61 PLS-00487: Invalid reference to variable
    'DBA_TAB_COLUMNS%ROWTYPE'
    37/3 PL/SQL: Statement ignored
    37/33 PLS-00320: the declaration of the type of this expression is
    incomplete or malformed

    Hi Floyd,
    fwellers wrote:
    Frank,
    Does something in the compile errors I sent ( below again ), lead you to believe there is a permission issue ?
    LINE/COL ERROR
    7/3 PL/SQL: Item ignored
    7/31 PLS-00201: identifier 'DBA_TAB_COLUMNS' must be declaredYes. "PLS-00201: identifier 'DBA_TAB_COLUMNS' must be declared" is the error you would get if you tried to say
    TYPE typ_coltab IS TABLE OF dba_tab_columns%ROWTYPE INDEX BY pls_integer;wihtout privileges on dba_tab_columns.
    The line above appears to be line 7 of your code.
    "dba_tab_columns" appears to start in postion 29 (not 31) of that line, but you didn't post your code inside tags, so 2 characters of whitespace could easily have gotten lost in the posting.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Maybe you are looking for