HT3820 once registered, the "pro" features are not turned on even though the "Pro" appears on the Quicktime icon.
After downloading quicktime 7, I entered the registration code. The "pro" appeared on the quicktime logo and the "buy QT Pro" button went away however the pro features are not "on" or usable.
After downloading quicktime 7, I entered the registration code. The "pro" appeared on the quicktime logo and the "buy QT Pro" button went away however the pro features are not "on" or usable.
Did you open/load a file to the app? The "Pro" features are context adaptive and only "turn on" if content is both available and the feature can be applied to the particular type of content loaded.
Similar Messages
-
My iPad will not turn on even though it is fully charged. Any suggestions?
I was using my iPad earlier this morning without a problem. I plugged it in to charge because the battery was running low, and I left it alone to charge. I came back to unplug it and use it, but it will not even turn on even though I checked it maybe an hour ago to find that its progress was at 85 percent. How do I turn it back on at this point? I press the power button, the center button, and nothing happens. Please help, thank you!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
incoming mail does not appear automatically even though preferences is set to check for new mail every minute
If by download bar you are referring to the spinning gears, they are gone in Mail 6.5. There is no indication Mail is checking for Mail. If it finds Mail, it will show it downloading in the lower left hand corner.
Under the Window menu there is Activity. Try opening it and you should be able to see if Mail is checking for new mail. -
My brand new Macbook Pro will not turn on even though it says it is charged
I just got my Macbook Pro 2 days ago. It was working just fine yesterday but now it willl not turn on. I plugged it in and the green light is lit up but it will still not turn on. Help!
I suggest you take it in for repair/replacement.
Barry -
Schedule lines are not getting confirmed even though stock is there
HI,
i want to discuiss one sensitive issues which is a simple one.
my schedule lines is not getting confirmed even stock is there at sales order.
there is no delivery block.
there is no minimum stock level.
there is no credit check for that.
there is stock of 2 EA in that plant and storage location, but stock is not getting confirmed at sales order level or transaction level.
even stock is there it is going to avaliability check overview screen and giving stock confirmation after 12 days.
even i checked all the dates.............but its of no use.
what to do ?
after testing all the possible options i am taking help from
please help me in this regard,
regards,
balajitHi
you need to check the following.....
First check the Factory calander of your plant whethear some holidays or not
Second most importantly you have to check which stretagy group is assigned in the material . whethear it is make to order or make to stock. change it as make to stock.
"What happened if material stretagy group is make to order then from sales order system generate requirement of that material against that particular stock, that time system do not consider the unrestricted stock and not confirm schedule line."
Regards
Shambhu Sarkar -
Having problems signing into Facetime on ipod touch. Everytime I try it says I don't have the correct user ID or password. But, they work fine to sign in for Itunes. HELP!
I had this problem too. As it turns out, when you first sign in to FaceTime, it saves that password. If you have changed your Apple ID account password since the first time you used FaceTime on your device, it will reject that password, even though it is right. Basically, FaceTime thinks it needs the original password. This means that you will have to restore. If you haven't changed your password though, I am not sure.
-
Display does not turn on even though computer is running
Hello All,
I have a 2008 non-unibody MacBook Pro. When I boot the computer, sometimes the display does not turn on. I've tried using the flashlight technique, and there isn't even anything on the LCD. I know the computer is on because it makes the chime and if I enter my password I can adjust the volume and play music. Occasionally, resetting the SMC will fix the issue temporarily, but it doesn't always work. What should I do?Tried resetting PRAM?
Some of the display settings are stored in PRAM.
Reset PRAM: http://support.apple.com/kb/PH14222
Best. -
MacBook pro retina display is not turning on even though the computer is on.
My Mac book pro retina display has a solid black screen. I can hold the power button down to turn it on and off, but the screen never activates.
Restart.
Press F2 key couple of times.
Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
Descriptions are not being exported even though option is ticked
This is a new problem for me. Not sure when it cropped up, but possibly in the last iPhoto update?
When I export a photo from my library and tick the 'Titles and Keywords' box, the description field is not copied into the IPTC caption field as it used to be. The title and keywords are, but when I look at the info panel in Finder (or in Preview), the description field remains set to "SONY DSC" which is the camera's default.
I'm running iPhoto 9.4.1 on OSX10.8.2
Is this a bug? Is anyone else having this problem? Any insights appreciated.I fixed all my exported photos with missing IPTC data using this command:
exiftool -iptc:all= -tagsfromfile @ -all:all -unsafe ./
Download the exiftool here: http://www.sno.phy.queensu.ca/~phil/exiftool/
open a terminal window, cd into the directory with all the exported photos, then run the exiftool command.
voila! the descriptions re-appear.
if iPhoto can create new descriptions, regardless of what camera they were taken on, then iPhoto should also be able to export them. And, this is why i'll never use iPhoto again. -
Rotation lock will not turn off even though on mute
Hi I accidentally turned on the rotation lock and although I have reclicked mute & restarted several times, it will not unlock/allow me to rotate
In settings you have the option to set orientation lock for the upper right hand side button above the volume control. You can also choose to use that button as a mute button. Or, if you double click your home button and swipe your botom apps to the right, there is an orientation lock icon. You touch it to turn on or turn off........
-
The new track and mask features are not showing on my version of premiere cc. It says it's uptodate.
Please double-check the exact version as displayed in the About box. The new release is an entirely separate version referred to CC 2014.0; it is not merely an update to CC7. That means that if you launch CC7.2.2 and go Help>Updates, it will report that the program is up to date.
If you're on CC7.2.2, then the easiest way to install CC2014.0 is to launch the Creative Cloud app and scroll down the Apps tab looking for "Premiere Pro CC (2014)."
Note that once CC2014 is installed, you will need to use a new app icon to launch it; the old icon will continue to launch CC7. -
The Parallel Data Warehouse (PDW) features are not enabled.
Tryin to use the Over Clause and receiving the following message:
Msg 11305, Level 15, State 10, Line 2
The Parallel Data Warehouse (PDW) features are not enabled.
Microsoft SQL Server Management Studio 10.0.5500.0
Microsoft Analysis Services Client Tools 10.0.5500.0
Microsoft Data Access Components (MDAC) 6.1.7601.17514
Microsoft MSXML 3.0 5.0 6.0
Microsoft Internet Explorer 9.0.8112.16421
Microsoft .NET Framework 2.0.50727.5456
Operating System 6.1.7601That's only the information about your client tools; the SQL Server version is mor of interest. You can query it with
SELECT @@VERSION
Olaf Helper
* cogito ergo sum * errare humanum est * quote erat demonstrandum *
Wenn ich denke, ist das ein Fehler und das beweise ich täglich
Blog
Xing -
How do I find out what features are not useful in my Classifier?
How do I find out what features are not useful in my Classifier? I am trying to trim down the number of features to speed up the training of my data, I have about 3700 features. I have found the Filter Based Feature Selection Module and have not been successful
in using it. I have looked through all the examples and have not been able to find any examples using the module. Will the Filter Based Feature Selection Module help me to trim features. If so how do I use it?One way to do this would be is to use a random forest classifier. Feature/variable importance can be obtained relatively easily with random forests.
Here is how you may do it in R.
> install.packages('randomForest') #install randomForest package in R if it is not already there
> library(randomForest) # reference the library
> data(mtcars) # load motor cars data that ships with
#train a random forest
> mtcars.rf <- randomForest(mpg ~ ., data=mtcars, ntree=1000,keep.forest=FALSE, importance=TRUE)
> importance(mtcars.rf)
> importance(mtcars.rf)
#You will see an output like below
%IncMSE IncNodePurity
cyl 16.168645 169.96741
disp 18.672188 260.08722
hp 17.584375 184.95007
drat 6.948743 63.54528
wt 17.818509 254.30347
qsec 4.772889 33.25546
vs 5.303058 24.39064
am 5.210181 17.36626
gear 4.619161 21.55450
carb 8.577037 28.46715
# or plot the importance as follows
> varImpPlot(mtcars.rf)
What this tells you is how important predictors/features/variables like horsepower(hp), weight(wt), no. of cylinders (cyl) is in predicting miles per gallon (mpg).
If you are wondering how the data looks like. Try this
head(mtcars) # gives first few lines of the data set.
mpg cyl disp hp drat wt ...
Mazda RX4 21.0 6 160 110 3.90 2.62 ...
Mazda RX4 Wag 21.0 6 160 110 3.90 2.88 ...
Datsun 710 22.8 4 108 93 3.85 2.32 ...
. Try this
Here is a few useful resources:
Random Forest documentation (Check out the pages on variable importance and variable importance plot)
http://cran.r-project.org/web/packages/randomForest/randomForest.pdf
Motor cars data: http://stat.ethz.ch/R-manual/R-devel/library/datasets/html/mtcars.html -
How can I re-install Imovie 10? some features are not available ( world globes ,etc...) after the update from today
I'd suggest a fresh reinstall of iMovie then. Delete the Application and re-download from the Mac App Store. You should see something like this:
-
After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?
Maybe you are looking for
-
Can't update haskell-http by editing the PKGBUILD in the abs
So I dont see how to update the haskell-http package. I have adjusted the versions of the depending pkg's, but it doesn't help. (moved from Thread p1486676 because partly solved the overall sysUpgrade issue) termnml wrote: Okay. So as packages got up
-
Copying data between tree controls
I am currently using a tree control to list the tables in a database (with columns as the children under each parent table). Since I need to duplicate the tree control several times on the front-panel and display the same data in each, is there a si
-
Error in a Select with a second Select in stored procedure.
Hi, Can you help me please to know why this query works in a PL/SQL Console but not in a stored procedure. Query : SELECT variable1, variable2, (SELECT sum(variables) FROM foo), <---- Error here FROM bar this query works in console but if i compile a
-
Every month for the last 5 months, I have been trying to cancel $13.99 per month on my visa for a subscription that I DON'T HAVE. I WANT THESE PAYMENTS TO STOP BECAUSE I DO NOT HAVE A SUBSCRIPTION ANY LONGER. IT ENDED LAST OCTOBER 2011 AND THE PAYM
-
I do not have the Print To PDF Setup option
the instructions to intall the Adobe CreatePDF printer are below. I do not have the "Print to PDF Setup option on my Adobe site. Can someone help me with this? Install Adobe CreatePDF Desktop Printer In Adobe PDF Pack, click Print To PDF Setup.