HT3825 Why is not my Fuji X10 supported? Will it ever be, or would I have to go to Adobe?
I bought a Fujifilm Finepix X10 as a complement to my Canon EOS 5D MkII a couple of months ago. So far, I like it a lot.
However, there is still no support for the RAW files it produces in Aperture.
Is it likely that it will never be supported? (I can see cameras produced long after the X10 was released are now supported by Apple).
Would I have to switch from Aperture to Lightroom to get support?
(Using the bundled software is no option for Apple Mac users).
Thanks,
Hans-Göran
On the grounds that the X10 is a trimmed down version of the X100, I would expect them both to use the same RAW format.
X100 has been supported since the OS X 10.6.8 update.
Try the Camera RAW update 3.7 and see if that sorts your problem.
Similar Messages
-
I descarguei these new versions adobe creative Cloud, y uninstalled for removing the trash, why did not interest me, then appearing me sigue to update something that I have not already installed, how do I solve this problem?
Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/ -
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.Or if you've recently got the phone unlocked then you'll need to connect it to itunes and then do a fresh restore to unlock it ,although for most users simply connecting to itunes for few seconds did the trick.
-
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information
what can in do?Well unfortunatly that advice does not always work. I bought a unlocked iphone4 from apple several years ago and went to att on a no contract basis. Six months later the phone crashed while updating the operating system. Apple replaced the phone with a new one. All is fine till I got a iphone5 and gave te phone to my cousin. The phone is now locked to att but att says the IMEI number is not a valid ATT IMEI and therfore cant unlock it. Apple says there is nothing They can or are willing to do so now I am stuck for a 600.00 phone that can't be used.
If anyoun knows a way naround this situation mI would appreciate a heads up. -
Mac user, OSX 10.9.4. CS6, in the new Blur gallery the pin with adjusters does not appear for any of the three blur filters. This may have occurred since taking adobe watermark add-on and updating Bridge. any ideas?
I am using Mac OSX 10.10.1 (memory 8 GB 1600 MHz DDR3, graphics Nvidia GeForce GT 650M 1024 MB)
and my version of Photoshop is CC.
I ran into the same problem: I am able to place and view Blur Gallery pins but the adjustment wheel or outer control arounf the pin that allows you to tweak the blur value disappeared after being initially available. Additionally, the placed pin or pins appear to flicker on screen (while in blur gallery mode) until committing the change with the OK button. I have tried restarting both the computer and Photoshop, as well as what some other users have suggested such as View>Show>Edit pins turned on. Nothing has helped so far. I am still able to adjust the blur amount from the Blur Tools slider. thank you. -
We bought a new prepaid phone on 10/5/14 at a Verizon store. Had an existing phone number transfered and the phone can not be activatde. When will the system be updated? We have lost 2 days of service and now cannot use the original phone due to moving service to Verizon.
The exact same thing has happened to me! The customer service reps keep saying there is nothing they can do until their system upgrades are complete and they can't tell me when that will be! I need my phone number back!!! Somebody please help with this issue!
-
Why is not Windows 8 natively supported on MacBook Pro (13-inch, Mid 2010)?
Hello,
Can somebody from apple say why they don't add native support of Windows 8 for MacBook Pro (13-inch, Mid 2010) when it is supported on 15-inch model?
Looking in: http://support.apple.com/kb/HT5634
I know that Windows 8 is possible to install and use, but I think it does not make sense to limiting just 13-inch model in bootcamp
ThanksWelcome to the Apple Support Communities
It's a restriction, because the Mid 2010 13-inch MacBook Pro is completely compatible with Windows 8 (it meets all its requirements), but Apple didn't want to provide Windows 8 Boot Camp drivers for it. You can run Windows 8 if you want, but it won't work properly.
Apart from that, there are some how-to's in the Internet in order to install Windows 8 Boot Camp drivers in unsupported Macs -
Any news or workarounds for Fuji x10 RAW images?
Thanks!
SteveInteresting. He evidently has access to beta versions that the rest of us don't.
http://blogs.adobe.com/lightroomjournal/2011/11/lightroom-3-6-and-camera-raw-6-6-available -on-adobe-labsoe.html
If Sean Reid is telling the truth, then the odds of x10 support being in the final 3.6 version just went up a bit.
Hal -
Hi,
At the "URL of affected site", below, the "Terms and Conditions" link will not work on machine1 with Firefox 4.0.1, cookies and caches cleared (I clear "temp" directories too). I updated to Firefox 5.0, the "Terms and Conditions" link still won't work.
Note that other 'pop up' windows encountered while navigating through the parts look up function (i.e. http://www.fordparts.com/Default.aspx#tabs-2) on that site appear to work fine, with or without pop up windows enabled, in this install of Firefox 4.0.1.
As a sanity check, I tried the link on machine2, which uses Firefox 4.0.1 also, Windows XP. The "Terms and Conditions" link will not work there either.
I tried the link on a third machine, with Firefox 3.6.16, also Windows XP, and the "Terms and Conditions" link *does* work there.
So this would seem to be an incompatibility with Firefox 4.0.1 and/or 5.0. Any ideas [besides regressing back to Firefox 3.6.16 :) ].?
Regards,No errors in error console. No effect using *. I tried using the dns name of my localhost both in the Firefox URL and in the javascript and I get exactly the same. I have spent a huge amount of time looking into this issue.
One thing I noticed is that if I use the examples on the internet (http://arunranga.com/examples/access-control/preflightInvocation.html or http://saltybeagle.com/cors/) they work in the same browser. These examples however, are accessed through HTTP proxies.
I am wondering if the issue has to do with using the same hostname just with different ports. -
please give me suggeston
Only the carrier to which the phone has been originally locked to can unlock the phone. If unlocking is no option for this carrier, the phone can't be unlocked.
-
Middle-East Languages support - Will it ever be so...
Dear the Skype support team,
As an Israeli user who's using Skype a lot for work and private purposes, After so many years I really can't understand why there's no any Middle-East languages full support. Of course, you can to change the language to hebrew, but then everything is mixed up because it's built on the base of Left-to-Right languages, like English etc.
I am attaching a few images to show the difference between how it is right now using Hebrew with skype and how it is should be like.
Skype home:
Looks like: http://i . imgur . com/eGllguc.jpg (with no spaces)
Should be like: http://i . imgur . com/IPApvdr.jpg (with no spaces)
As you can see the all interface should be RTL, starting with changing the places of the Skype home and the contacts and recent window tabs, as the status changing, the friends latest updates which should be RTL (the profile picture and the text in opposite sides), changing the place between the "recent" and "contacts" tabs, and also there to change the place between the contacts profile picture to theirs Skype nickname and status.
Chatting with someone:
Looks like: http://i . imgur . com/4jpPLYR.jpg (with no spaces)
Should be like: http://i . imgur . com/MEOyv34.jpg (with no spaces)
As you can see, it's not so bad as it is in Skype home, but still something writing in Hebrew, changing to English, and going back to Hebrew mix-up the order of the sentence and become impossible to read, also the usernames and the sending times are in opposite sides and makes it more complicated to know who the message were sent from.
If you'll need anymore help with understanding how to make it comfortable to use for Middle-East users, I'll be glad to help, but please fix this issue, which should be a minor one, and despite this not yet solved.
Thanks a lot,
Erel.
Attachments:
home-how-it-is.jpg 195 KB
home-should-be-like.jpg 206 KBDear the Skype support team,
As an Israeli user who's using Skype a lot for work and private purposes, After so many years I really can't understand why there's no any Middle-East languages full support. Of course, you can to change the language to hebrew, but then everything is mixed up because it's built on the base of Left-to-Right languages, like English etc.
I am attaching a few images to show the difference between how it is right now using Hebrew with skype and how it is should be like.
Skype home:
Looks like: http://i . imgur . com/eGllguc.jpg (with no spaces)
Should be like: http://i . imgur . com/IPApvdr.jpg (with no spaces)
As you can see the all interface should be RTL, starting with changing the places of the Skype home and the contacts and recent window tabs, as the status changing, the friends latest updates which should be RTL (the profile picture and the text in opposite sides), changing the place between the "recent" and "contacts" tabs, and also there to change the place between the contacts profile picture to theirs Skype nickname and status.
Chatting with someone:
Looks like: http://i . imgur . com/4jpPLYR.jpg (with no spaces)
Should be like: http://i . imgur . com/MEOyv34.jpg (with no spaces)
As you can see, it's not so bad as it is in Skype home, but still something writing in Hebrew, changing to English, and going back to Hebrew mix-up the order of the sentence and become impossible to read, also the usernames and the sending times are in opposite sides and makes it more complicated to know who the message were sent from.
If you'll need anymore help with understanding how to make it comfortable to use for Middle-East users, I'll be glad to help, but please fix this issue, which should be a minor one, and despite this not yet solved.
Thanks a lot,
Erel.
Attachments:
home-how-it-is.jpg 195 KB
home-should-be-like.jpg 206 KB -
I live in the UK and recently got my US model (A1428) iPhone 5 repaired at a UK Apple store. They replaced it with the exact same model.
The original phone was factory unlocked and I was assuming that the replacement phone would also be. Having done some tests it seems like it is unlocked (e.g. it has 5/5 dots reception and 3G) but I cannot get past the activation stage [iTunes doesn't do the job either]. The following message keeps showing up:
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
I am planning on bringing it back for help. In the meantime I am able to (using itunes) enter recovery mode, do a restore, update the iOS, etc. but I doubt that would help so I am currently avoiding it.
Any guidance is appreciated.The message you received indicates that the phone is locked to a carrier other than the one for which you have a SIM. You'll need to take the issue up with Apple. Nothing you do with iTunes is going to make a difference.
I'm quite surprised that the UK Apple Store replaced a U.S. purchased phone. They usually won't.
Best of luck. -
Why no RAW support for Fuji X10?
The Fuji X10 has been on the market for almost a year now and there still is no RAW support for it in Aperture. Why?
Only Apple can asnwer the "Why?" questions, I'm afriad.
Aperture menu -> Provide Aperture Feedback and let them know you want it. -
Why is no support for raw file of fuji x10 from Apple ?
I have waiting for sometime for the update to support fuji x10 raw file from Apple. Please make it happen .
We can't. This is a user to user forum. You can sign up for a free online developer account on http://developer.apple.com/ and submit a bug report on http://bugreporter.apple.com/
You can request Fuji to do the same.
You can check the complete listing of RAW updates on:
http://support.apple.com/kb/HT4757
If you look there the x100 is supported, but no x10 for Lion. So the chances of x10 on Snow Leopard support is that much more remote, since Apple typically builds on their support with each new operating system. -
Lightroom supports Fuji X10 EXR RAF files since version 4 Beta (and v3.6), but unfortunately it is not working properly. There are two different EXR modes and Lightroom seems to support both, but the outcome is not right.
1) Loading 6 MP EXR DR (200/400) mode where images of the two sensor halves are saved in the RAF file leads to wrong colors. Specifically the attenuated highlights of the longer exposed half are turned to purple while they should at least be neutral grey (attenuated clipped white). There also are color artifacts on the edges between the two blended halves when clipped highlights are present.
Generally I would like to be able to have more control over the whole blending process and especially be able to get more information out of clipped highlights. Both Lightroom and the in-camera JPGs just ungracefully attenuate clipped whites from the longer exposed half to gray, but do *not* use the unclipped information of the shorter exposed half to get more information out of them.
Even though Capture One also doesn't give any control over the blending process I was able to pull out detail/information from those highlights while in Lightroom I can only turn bright purple into dark purple regardless of whatever exposure relevant slider I use.
2) Loading 12 MP full resolution RAF files generally works, but there is _less_ detail in them than in out-of-camera JPG, regardless of what filter/sharpness settings I tried. Lightrooms lens correction for the X10 works better than the in-camera one in that it does not compress the middle of the image (by cutting more off the sides), so in the middle there might be slightly mode detail out of Lightroom. But the rest of the image only gets detail on a level somewhere in between 6 MP ooc JPG and MP ooc JPG (meaning more detail than 6 MP, but less than 12 MP).
I can imagine that the demosaicing process could be optimized, but another culprit might be Lightroom's sharpening method, especially where the "Detail" slider is concerned. The Detail slider seems to have a hard time with EXR pattern in general and especially EXR noise pattern. Increasing Detail on Lightroom's Sharpening filter mostly increases noise and quite considerably so. Especially on 12 MP full resolution files the labyrinth like noise pattern of the EXR images gets sharpened a lot by the Detail slider.
LR's luminance filter seems to suffer from EXR specific noise patterns, too. Again it has a hard time finding the right balance of eliminating noise while keeping detail, at least compared to the in-camera noise filter (and some other RAW software I tried).
One more thing that I am not sure about whether it is a problem of RAW software (aka LR) or the camera: While reds in JPG may either be somewhat oversaturated while at other times clip the red channel into turning reds to pink I noticed that in LR they may appear more orange. Pushing orange towards red via sliders helps with that, but I wonder if this is a form of misinterpretation by Lightroom or if the raw file really contains more orange than red information?
Thanks for any answers in advance!"High Resolution" DR (ISO equal or higher than DR) in M size should be usable. L size is usable, too, but the detail is lacking (more than 6 mp, but less than 12 mp ooc JPGs). EXR DR RAW files are a special case. It's not easy to even create them with the camera, because you have to use RAW + JPG and ISO below DR and then shoot a situation where ISO below 400 is enough (broad daylight).
And these files are usable, but colors are somewhat off in LR, which can at least partly be managed via HSL. It's not perfect, because highlights of the longer exposed sensor half are handled wrong (from my point of view), but I send some example images now. We need to give Chan some time, because I only sent the files a few days ago.
One thing that doesn't work well between LR is EXR kind of noise and LR's sharpening. Some people called that "reticulation pattern" on the DPreview forum. What happens is that LR's sharpening tends to sharpen noise more distinct than anything else, so you need to keep that "Detail" slider down and overally watch sharpening. Also LR's luminance noise-reduction tends to remove more detail than the in-camera one and the color noise slider has to be used with caution in order to keep saturation (default value is too high).
It's all workable, but not exactly in love with each other.
Maybe you are looking for
-
Can I use iMac as display for new mac mini?
can I hook my early 2008 24" Core 2 Duo iMac to a new Mac Mini to use as a display? I love the display, but my iMac is getting too slow, even with the maximally upgraded RAM to 4 GB. I don't want to get rid of my iMac, so I was thinking of buying a
-
Clear jumplist for some taskbar buttons
I have moved most of my documents to a network drive. How do I clear the jump list for the Word and Excel buttons on my taskbar?
-
DC created and activities released but not sync
Hi everyone, I´m working with a B2B custom app, I have created a DC, link the used public DC´s etc etc . . .and then make a custom project from this, I already make deploys and everything is working, the DC are shown in Inactive DC..... well, the pro
-
How do you change video application defaults
When I save movie clips on my iMac, it automatically saves it as a quicktime file. Quicktime is my default video application but I would like to change my default to Windows Media Player. How would I do that?
-
Phantom iPad apps, phantom updates!?
Hi all, one of my friendly colleagues cannot install updates to her iPad 2. These apps do not appear on her iPad (note the screen capture where she searches unsuccessfully for the OverDrive app which appears on the "Updates" screen capture). We've tr