HT3867 automatically connect to known networks using wi fi is NOT working

"automatically connect to known networks" using wi fi is NOT working. Please can any one help

Hi jvichatt,
Welcome to Apple Support Communities.
You may find some of the steps in this article helpful for troubleshooting your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Best,
Jeremy

Similar Messages

Dialup networking using operator assist option not working on Windows 7

I know how to enable operator assist in Windows 7. The issue is that when I click the initial Dial button I get a dialogue box stating modems connecting, I see the modem initialize but the connecting dialogue box never changes to
the second dialogue box that tells you to manually dial your number and hit connect when you hear the carrier from the far end modem. I have tried different laptops running windows 7 and none of them work. One has a built in soft modem, one has
a USB serial port connected to an external 3Com Courier modem and one has a USB modem. Everything works on Windows XP, but none of the Windows 7 machines work. I have tried this using Windows 7 Enterprise edition, and Professional edition. If
I wait long enough I eventually get the 638 time out error but the modems connecting dialogue is still on the screen. If I hit the cancel button it just cancels the operation and if I dial the number and hear the far end carrier I can't get my modem
to answer. I have looked at the modem log file from both a working windows XP and a Windows 7 system and they are both exactly the same up to the point of the modems connecting dialogue box, the Windows XP log shows a Dial command
when I connect using the second dialogue box.
Thanks in advance...
Randy

Hi,
Here are the details of the expected behavior (as observed by XP SP3 behavior):
1. Both source and target modems are serial devices.
2. Network Connections is opened
3. Advanced menu -> Operator-Assisted Dialing is selected (enabled)
4. Dialup connection is double-clicked and dialog to connect appears
5. Dial button is clicked
6. Dialog appears: " Pick up the handset and dial (or ask the operator to dial). Press OK immediately after dialing, then replace the handset."
7. Customer picks up handset connected to line port of modem and dials live operator, operator picks up and forwards call to specified target modem
8. As soon as customer hears target modem tone he hangs up handset and clicks OK on dialog from step 8.
9. Dialog appears: "Modems connecting..."
9. Modems connect
Here is the observed behavior in Win7:
1. Both source and target modems are serial devices.
2. Network Connections is opened
3. Alt key pressed which brings up menu bar. Advanced menu -> Operator-Assisted Dialing is selected (enabled)
4. Dialup connection is double-clicked and dialog to connect appears
5. Dial button is clicked
6. No dialog to pickup handset ever appears. Instead we see dialog for "Modems connecting..."
7. Modems can't actually connect because no number was ever dialed. Opportunity to dial number to live operator is not presented to user.
This performance is by-design. The dialog box is not appearing because the service is running in session 0. Generally, user sessions are from session 1. Since the service is running in session 0, the dialog box wont be visible in other sessions(user sessions).
This session 0 isolation was implemented right from vista.. In XP, service is running in user session and hence user is not experiencing any problems.
Since this function is old and we won't fix it in Windows 7. But we could provide the workaround as below:
Resolution
1. Start->Run
services.msc
2. Start the “Interactive Services Detection” service if not already started.
3. Right-click this service and select Properties
4. Select Log On tab and enable “Allow service to interact with desktop”. Click OK to accept the changes.
5. Repeat step 4 for the Telephony service
6. Make the OA call:
a. Click Dial on DUN dialog
b. Dialog appears, select “View the Message”
c. Session switched by system – “Manual Dial” dialog appears
d. Pick up handset and dial far-end modem, wait for far-end modem tone, click OK and hang up handset
e. Click “Return now” – system switches session back to user session.
f. Modems should connect.
Best Regards,
Annie Gu

Not automatically connecting to known Wifi networks anymore.

A few days ago my Macbook prompted me to update, i didn't check to see what the update was, but regardless since then my macbook refuses to automatically connect to known networks when i login/wakefromsleep etc. This is not just at home, even at my University it's having trouble connecting to the secure network there (which it used to connect to with no issue) and I'm being forced to use the open network with a VPN app. Is anyone else suffering a painfull airport? Any suggestions? Any way to undo the latest update if that is infact the cause?
Thanks.
John
Message was edited by: johnaz

I have had wireless problems intermittently for a year, and seriously for 6 weeks. Apple denied the issue and was no help in spite of many tens of thousands of people on their own discussions complaining. I found a post suggesting a couple of things which fixed the problem. I don't know if both are necessary, but the first by itself does not solve the problem.
Lock the channel of your router to channel 1, apparently Apple and 802.11n don't play well together on higher channels. When this becomes a standard this will be resolved I hope.
Open your network preferences, select 'airport' and advanced. Delete unused networks. Select your network.
Open TCP/IP and write down all the settings, configure iPv4 manually. Enter the settings manually. Turn off IpV6.
Open DNS and write down your DNS server. Delete it and re-enter it manually.
This has worked on 2 macbooks and an iMac for the last 3 weeks with no network drops.
Joe Shea
Philadelphia

TS4209 Macbook Air with OS X 10.8.2 not automatically connecting to known wifi network after sleep

Macbook Air with OS X 10.8.2 not automatically connecting to known wifi network after sleep

If you are using WEP as a security on your router that is why it won't connect. WEP is so old school and very insecure that Apple has made it so there WiFi cards won't connect to WEP. It might as well be wide open. You can try that. Take all security, WEP/WPA/WPA2, off your router and see if it connects.
If it does then use either WPA or better WPA2.

Why is it that when i upgraded to ios 6, my ipad 2 no longer connects to known networks automatically

why is it that when i upgraded to ios 6, my ipad 2 no longer connects to known networks automatically?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home. I have restared the phone and toggled the router, still no connection

After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.

When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.

PC will not automatically connect to wireless network on startup...

Hi all - I have a WRTG54 wirless router with the latest firmware. Windows XP Home SP2. I have a mixed network with two wired PCs and one wireless. The wireless PC will not automatically connect to the network. To connect to the network i have to go to the wireless network properties box and check "let windows automatically configure network" Once I do this the wirelss PC connects with no problem. Unfortunatley, whenever i turn the PC off and turn it back on the "let windows automatically configure network" is unchecked and i have to go through the process of checking it again. I uninstalled the wireless adapter and reinstalled the drivers only and then ran the windows wireless setup wizard but the problem persists. Any help on this would be much appreciated.!!!! Thanks!!

First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Do not let "Windows automatically configure your network". Instead do the following:
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will remove any old settings). Reboot computer. Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. It should connect automatically. If you still have trouble, in the computer, temporarily disable your software firewall, including Windows Firewall, and see if that helps.
Some users have reported improved wireless connections by switching to WPA ( = WPA with TKIP) encryption.

[SOLVED] wicd fails to automatically connect to a network

I have just upgrade to kernel 3.6.5-1 and after that wicd fails to autoconnect to my wireless network which I have set "Automatically connect to this network" from wicd-curse.
Is anyone experiencing the same issue? Any idea on what causing the issue?
Last edited by pingpong (2012-11-03 05:07:58)

Do you think some more information might help?
Start with telling us your chipset. Check with lspci -nn (That would be two n's, not m)
Also, is it your router? Is it encrypted? WPA? WEP?
Can you see it with iwlist scan
Can you associate with the access point by hand?
Is there anything interesting in the journal (or logs)?
What DE are you using?
Is the WAN blocked? (Check with rfkill list)
Last edited by ewaller (2012-11-03 03:50:27)

Does not automatically connect to wireless network anymore

Mac Book does not automatically connect to know networks any longer.

Hi sashton,
When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
Avoid giving your wireless network a common name (SSID)
http://support.apple.com/kb/HT4450
If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Thanks,
Matt M.

IPhone 5s won't automatic connect to cellular network after the wifi connection lost.

My iPhone 5s won't automatic connect to cellular network after the wifi connection lost. I have try make a restore and open again my cellular data but the problem is still there, after I try to restart my iphone then can use my cellular data, but after few hour ago I still confront the same problem too.

I also tried a total reset. But it didn't work.

I forget to charge my MacBook Pro and it turns off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. Sometimes pulling the Battery out fixes it

I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8

I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8

My Photosmart C410 won't automatically connect to the Network

My Photosmart C410 won't automatically connect to the Network, I have to put in my password for the router every time I turn on the printer from the printer keyboard. Is there anyway that the printer will automatically connect to my network?

Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
When you turn off your printer, are you totally removing power from it (like shutting off a power strip)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?

Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck!

HT204053 When I try to login to my apple ID on my iphone 4 to use facetime, it will not work and tells me to check my connection? I have even tried creating a new apple ID but the same message appears

When I try to log onto my Apple ID to use facetime, it will not work and tells me to check my connection. I have even tried creating a new apple ID but the same message appears. I do not understand why this is happening, could anyone help me resolve this issue it is very frusterating that I can not enable facetime or imessage.

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

I will using of firefox but not working shortcut key of website.

I will using of firefox but not working shortcut key of website.
It's working in chrome and I.E.

Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

HT3867 automatically connect to known networks using wi fi is NOT working

Similar Messages

Maybe you are looking for