HT3867 the login screen does not come up it shows im connected to wi-fi but nothing it was workin untill i updated the phone

trying to connect to a work wifi network I can connect to the server but the log in page that use to come up is not coming up sense i updated the phone to 6.1

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

Similar Messages

  • HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

    Hi,
    I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
    Is there a way to make the iPhone try to open the login page?
    Ben.

    I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
    My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
    But, sometimes it works the first time or suddenly for no reason.
    Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

  • Print Screen does not come up

    Good Morning,
    I am having an issue with printing from Adobe.  I got an email with a PDF attachment and when I open the file and go up to File/Print the print screen does not come up and I cannot print the document.  I tried it on a seperate computer and it printed fine.  I have tried updating but that didn't do anything. 
    Does anybody have any ideas on why this might happen.  I was thinking that the file might be corrupt but as I said I can print from a different computer no problem.
    Thanks

    Actually, Reader is in a different forum. However, the print process should be the same. It sounds like you have a printing issue in the OS. What versions of Reader and of the OS are you using. There is a possibility the version of Reader you are using is not compatible with the OS. Other than that difference, I can see no reason you would not get a print window. Also, try with another PDF just as a check.

  • Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

    Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
    I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
    Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
    I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
    I'm using Firefox 30.0 and Windows 7 (64 bit).
    Thanks.

    Hi moose53,
    Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
    If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

  • Keep trying to access my Hulu plus Account and it keeps telling me it's not available. It did that yesterday and then the login screen appeared (not sure how it happened) I logged in and it worked. Now today, same unavailable message comes up. Help !!!

    Keep trying to access my Hulu plus Account and it keeps telling me it's not available. It did that yesterday and then the login screen appeared (not sure how it happened) I logged in and it worked. Now today, same unavailable message comes up. Help !!!

    Try a Hard Reset.....
    Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds.  Ignore the swipe to turn off message.

  • I cannot connect my printer.  The nearby option does not come up on screen.

    I cannot connect my hp photsmart printer.  The "Nearby" option does not come up on the screen and it won't respond when I type in the name.  The computer's wireless is working as well as the wireless on the printer. 

    Hi Icullinan,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Click on the link below for more information:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
    This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    OS X: Connecting a Wi-Fi printer to your Wi-Fi networkhttp://support.apple.com/kb/ht3500
    Cheers,
    - Judy

  • Excel Addin login screen does not go away

    Hi All,
    I have a strange problem.
    When I use the Essbase Menu in Excel to connect to the Essbase cubes, the login screen comes up and after all credentials are provided and the OK button is clicked all accessible cubes are displayed but after selecting a cube and clicking on OK the login portal does not go away.
    It just stays there and the excel is not connected to the server.
    Please let me know if anyone has faced such a problem before and have an suggestions, the version of Essbase excel Add-in is 9.2.1.
    The Excel addin was un-installed and re-installed but the problem persists.
    Regards,
    Anindyo

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
    - Peter

  • Maverick update now my login screen does not work please help.

    Hello hope you can help.  I have a 24 inch Mid 2007 Intel iMac.  It has been great until now.  I recently did the Maverick update and now my login screen does not work.  When I wake the computer up the screen appars with my picture icon.  When I click on it nothing happens.  If I click on it a second or third time the beach ball appears and nothing happens.  I have to shut the unit down with the power button and when the unit powers back up everything works normally.  Are there any suggestions out there?  I have updated the software without resolution. Is this computer too old?   Do I have to buy a new one?
    Thank you

    Your iMac can support Mavericks according to the requirements > OS X Mavericks: System Requirements
    Try a Safe Mode boot. That deletes some system caches that may help.
    Startup your Mac in Safe Mode
    A Safe Mode boot takes much longer than a normal boot so be patient.
    Once you are in Safe Mode, click Restart from the Apple () menu.
    See if there's an improvement for the login screen.

  • Laptop screen does not come on

    My 1 year, 1 month  old pavillion dv4 laptop\'s screen  does not come on. At first I thought it was the screen. However after geek squad and one other computer repair place diagnosed it, they said it needs the motherboard replaced.
    I currently have the laptop hooked up to a external monitor and it works fine in safe mode. Any suggestions where I can get a motherboard?

    Hi there ,
    Try Hard Reset
    Link is given Below :
    HARD RESET
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Satellite M60 - screen does not come on when i reboot

    I have a Toshiba Satellite M60 and the screen does not come when I power down or reboot. It takes about 12 tries before it comes on. When the screen does not come on the computer still boots up ok just no screen.
    I have to put it in standby mode if I do not want the hassle of trying to get the screen to come on. Is this a screen or inverter problem?
    Any help would be appreciated.

    Hello Mark
    You cannot expect that someone here offer exact diagnostic to your problem. For instance, I can say yes, you need new display. And what now? Do you want to follow my opinion and order new display?
    What you really need is professional help. Technicians know how to handle with such cases. Maybe just some cable must be exchanged. I recommend you to contact nearest authorized service provider. Explain them the situation and let them check your notebook.

  • Screen does not come on

    Our MacBook Pro screen does not come on during hardstart, or from sleep mode.  Takes several re-boots for it to come up.

    Hi RCollier15,
    Thanks for visiting Apple Support Communities.
    You may find the steps in this article helpful for troubleshooting your display:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Cheers,
    Jeremy

  • The specified screen does not exist in the DLIB file

    Dear Experts,
    I have copied the program of VA01 to Zprogram and created ztransaction when I execute ztransaction it will goto first screen, after I type input and click enter I will get below message
    Screen zsapmv45a 4470 does not exist
    when I check help (F1) it says as follows
    Diagnosis
         The specified screen does not exist in the DLIB file.
    Procedure
         Specify the programm and the screen number correctly.
         If you want to generate a list of existing screens, select the program
         and screen number on the Screen Painter selection screen. In the case of
         the screen number, you can only enter a * in the first position.
    can anyone tell me that how to maintian screen in DLIB file?
    Thanks in Advance...
    Venkatesh

    Do you have such a screen number under the function group where you have copied the transaction VA01?
    If not chek in standard func group for this screen and copy it.

  • Samsung NP305V5A: Screen does not come back after resume

    The issue: screen does not turn ON when resuming from suspend-to-ram. PC fans start working. I can even "gently" reboot the notebook, by pressing <Ctrl>+<Alt>+<F1>, then <Ctrl>+<Alt>+<Del>. But the screen does not work..
    Note: resume worked with the Catalyst driver (but this blob has many other glitches...)
    $ lspci | grep VGA
    00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] BeaverCreek [Radeon HD 6520G]
    02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series]
    Video driver: radeon
    Kernel parameters: root=/dev/sda2 rw radeon.dpm=1
    (note: radeon.dpm=1 helps a lot; before kernel v3.11 I could not use radeon at all)
    /etc/X11/xorg.conf.d/20-radeon.conf
    Section "Device"
    Identifier "Radeon"
    Driver "radeon"
    Option "ZaphodHeads" "VGA-0"
    Option "ColorTiling2D" "false"
    EndSection
    not sure if the following is usable, but still:
    $ lsmod | grep video
    uvcvideo 72900 0
    videobuf2_vmalloc 3280 1 uvcvideo
    videobuf2_memops 2343 1 videobuf2_vmalloc
    videobuf2_core 28027 1 uvcvideo
    videodev 111140 2 uvcvideo,videobuf2_core
    media 11751 2 uvcvideo,videodev
    i2c_core 24164 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
    video 11196 1 samsung_laptop
    usbcore 179880 6 uvcvideo,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid

    Hi moose53,
    Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
    If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

  • My back button does not work because the prior screen does not appear in the history.  I therefore must go back to the blue screen and reload safari.  Apple tech support could not help.  Can anyone else help?

    After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History.  Apple tech support was not able to fix the problem.  Does anyone have any suggestions?

    lbryan1987 wrote:
    I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
    You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
    there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
    Seriously? It's physically broken!

  • Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferenc

    Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferences i choose. Anyone else have any other ideas? I am about to lose my mind... I hate you ADOBE!!!

    that s just the problem, that is why my level of frustration is boiling over ... I have told InDesign over and over again "Do Not Show Again" but it will just not hold the settings. It might hold it for a day or so, but then suddenly there it is again on another launch. Very very annoying.

Maybe you are looking for

  • Scanning multiple pages on HP 5530 using iMac

    I recently purchased an HP 5530 printer and am unable to scan multiple pages into one PDF document using my iMac computer. Help! This question was solved. View Solution.

  • Problem in RFC - File Scenario

    hi all, I am doing scenario in rfc to file where , rfc is taken as sender communication channel. what is the way to configure sender communication channel. with thanks Deva

  • BizTalk 2010 Load Balancing Not So Balanced

    Ok here's our scenario. 1. One Orchestration running under HostInstanceProcess on 3 servers in the same Groupe using 3 different domain accounts 2. That Orchestration has a reference to Utilities dll, which in turns calls a stored procedure using ADO

  • ReadObject query by idfr does not work first call

    I am running Toplink 10.1.3.0.0 inside the oc4j container. A basic example is that I have an object Employee that has a String attribute id. This class goes to the employee table. I have set an Expression in the Toplink Workbench to do Read Object an

  • EP Notification Templates deployed

    Problem is:  Missing Deployment Parameter Substitution (Public Substitution variables) in SDM tool. Question:  Is there another substitution variable that EP uses to deploy it’s generic delivered templates to that we can also use for our application?