HT3887 I am trying to pair my iphone 4 to my 2011 Kluger KX-R. I have turned bluetooth on my phone but it keeps searching for devices and can not find any. My computer can find my phone but my phone can not find my computer.
I am trying to pair my phone to my 2011 Toyota kluger KX-R. I have turned bluetooth on my phone but it keeps searching for devices and can not find any, including my computer.
No worries. Often after iTunes updates you have to reconnect your device in order for iTunes to see it. Happens to me all the time!
Similar Messages
-
I'm using 3G3 16gb and just upgraded to 4.3.3. Tried activating bluetooth to use Personal Hotspot for my laptop. But the iphone keep searching for devices thou my laptop can detect the phone. Does anyone know how to solve this?
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
I have a 3GS. Am trying to sync a plantronics explorer 232 Bluetooth headset and can't figure it out. I have Bluetooth turned on but it searches for devices and the headset never shows up. Anyone know exactly how to do this? My tech skills are lacking
I have the same blueparrott headset headset with the directions. Actually reading them just fixed my iphone pairing issue.
Here they are in case u still need them along with what I needed to do to get mine to work with iphone 4
Pair Headset with Phone
Turn off headset off
Hold down headset's MFB (large top button) until red & blue lights flash and you hear 2 rising tones, followed by 4 more tones. Must wait for all before you release the MFB button!! (I had my hubby hold the MFB while I waited for the tones since both come from the headset
Release the MFB and follow your phone's instructions to place it in 'bluetooth' discoverable mode. With the iphone4, go to "General" and then "Bluetooth" and turn indicator to "ON".
This is where my issue occurred as the phone could not find the bluetooth, although it worked with my LG phone. So after trying it several times thinking I was nuts and that the issue was with the iphone, I looked further in the blueparrot's directions and found this step that fixed the issue.
Reset Paired Devices List
On the bluetooth, press and hold down both the volume up & volume down buttons for 5-6 seconds. A double beep will be heard and the list will be reset. Pairing info for devices previously paired will be lost.
The bluetooth directions provide this as step 4 but that did not work for my phone (see below)
4. Once the phone discovers the headset, select "pair" and enter "0000" code and that when pairing is complete the blue light on the headset will stop flashing and phone will prompt you to 'connect'.
This is what I had to do after resetting the device list on my bluetooth
4. My iphone instanting discovered the headset and displayed it under 'Devices" but showed a message that it was 'not connected'. Once I selected the device on the iphone by pressing on it then it changed to "connected".
Even when I turn the bluetooth on and off the device remains on the list and alll I do is select it to connect and disconnect after I turn on my blueparrott bluetooth
I hope this helps others! -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do?
Yes, that kind of tallies with my experience ... after 3 days of useless iPhone 3G (BTW, killing 3G on the phone and relying on acquiring AT&T 2G didn't help, it still locked onto T-Mobile with the result that it was draining battery and rebooting frequently!), I ended up visiting the local Apple Store.
Although the visit was not to resolve the iPhone problem, whilst there I happened to cycle the phone and due to the store having a local AT&T cell, the strength of the local signal meant that I finally re-acquired a AT&T 3G signal ... once locked on again the phone was fine for the next day.
Nett outcome of this is that I would prefer to lay most of the blame for this debacle on the poor state of 3G support both by AT&T (and US carriers in general), maybe exacerbated in my case by two related events (the local DNC in Denver, which saturated local AT&T cells including 3G and a proliferation of v2.0.0 and v2.0.1 firmwares on iPhones in town, which dragged cell coverage into the weeds).
It would be nice for future sanity if AT&T and T-Mobile could at least resolve the ability to acquire/release the iPhone gracefully, otherwise I'll be very sceptical of travelling back to the US with only my iPhone, as a self-employeed consultant I can't afford to be out of touch for three days again! -
Installed new hard drive and want to restore from time machine.
Get as far as 'select a destination' then it goes no further - just keeps 'searching for disks'
Help anyone please?1. Be sure your drive is attached and mounted.
2. If you have already written any data to the drive, back it up before proceeding to the next step.
3. In the Finder, choose Go > Utilities. The /Applications/Utilities folder will open.
4. Launch Disk Utility.
5. Click the icon for your external hard drive in the sidebar on the left.
6. Click the Erase tab along the top of the window.
7. From the Volume Format menu, choose Mac OS Extended (Journaled).
8. Enter a name for the external hard drive in the Name field.
9. Click the Erase button.
Make Sure that you choose the correct drive -
Pairing problems with Ihone 5 or Ipad. Remote is working. It just can't find devices. Eveything is discoverable. It keeps searching
Does any one have a solution?
Thanks
JacquelineThe ATV does not pair with iOS devices.
What is really trying to be accomplished? -
I have had my iPhone 4 for nearly a year now and previously i have had no problems with the phone but over the past few weeks since i have done the ios:5 update..
It's been driving me insane. I lose signal when i need signal the most & it's also been cutting out all of my phone calls.
Is anyone else having the same problem? & have you resolved it.. PLEASE HELP. I'M DESPERATE.Try restoring the iPhone as well as getting a new sim card.
-
I want to pair my iPhone 5s with the Mini Boombox I was using with my iPhone 3Gs.
Once the iPhone Bluetooth setting has been switched on the 5s just continually searches for devices and finds nothing - although the Boombox is beside it on my table (yes, and switched on).Hello Ken,
Thank you for the details of the issue you are experiencing with your new Bluetooth Mini Boombox. I am sure you are eager to use your new speaker.
I recommend reviewing the following article for steps to troubleshoot the issue you described:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Im trying to sync my iphone 3 to my computer but it keeps saying usb device not recognised
im trying to sync my iphone 3g to my computer but it keeps saying usb device not recognised.
Hi abbyntaff,
Welcome to Apple Support Communities!
Take a look at one of the articles below, the first iss for windows computers and the second is for Macs. They provide troubleshooting tips that should help resolve issues that would cause an iPhone to not be recognized by a computer.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
-Jason -
Can I track my iPhone from my iPad if I have not activated the 'find my iPhone' on my mobile? Or does this need to be set up already in order to search for my phone?
No.
You needed to have set it up prior. -
I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.
When in iTunes on the computer,my our ipadmshould show under devices.
Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up. -
I am trying to log onto my wireless connection but it keeps telling me I'm unable to locate any wireless network. I know there are several networks nearby. Is this a problem with my phone or my router?
I found a solution that has worked on both iPhone 4's I have that have had the same issues, and also including not being able to download updates in the App store.
Go to Settings > WiFi and turn it OFF.
Next go to General > Cellular > Cellular Data and turn it OFF
Next go back to Settings > WiFi and turn it ON, (wait a few seconds for it to sync with your network)
Finally go back to General > Cellular > Cellular Data and turn it ON.
I had the same issues on both my wife's phone, and my own, and it fixed it immediately without changing any proxy settings or reboots, (which I did try on my phone and did not work, but did not try on my wife's phone)
Hope this helps! -
I'm trying to pair my iPhone 4 with my MacBook Pro and it is saying my MacBook Pro is not supported. I just bought this thing and it's telling me that it isn't supported???
Do you mean Bluetooth?
If you are trying to activate your iPhone you need to use iTunes.
There's no need to "pair" an iPhone with a Mac. Syncing, restoring, backing up, apps/ music / photos etc., is all done with iTunes. -
I was trying to pair my iPhone 5 with my car's bluetooth and it asked me for a 4 digit code, what is the 4 digit paring code for the iPhone 5?
The code must be mentioned in the manual for the car read http://support.apple.com/kb/ht1664 it may help
Maybe you are looking for
-
[Microsoft][ODBC Microsoft Access Driver] Syntax error
I am new to Java. I have tried to write a simple program insert table in Access2002. However, I got the following error, ERROR: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement My code is as follows, import java.lang.*;
-
What is the latest Software version for AT&T Centros?
I have v1.01 but am not sure if there is a newer update version such as the Sprint 1.07? Post relates to: Centro (AT&T)
-
I need to setup a guest wlan on a single 5508 controller. Currently all of my ap's are in h-reap mode and all in remote buildings connected via a high speed wireless wan. The guest network could consist of 500 users in the near future, so i'm wonderi
-
Not connecting to internet after installing os x mavericks. and thus i cannot complete setup
please help today i installed mavrericks update and now my mac is showing new setup window. but it is not connecting to internet and i cannot sign in to apple account. and it seems like i lost all my data.. please help me. if i lost my data i will be
-
Hello, I need to know, if there is a workflow for FD32 transaction, i searched by events and i didn´t found nothing, I found only a BO BUS1010, but this the object there isn´t a event create, the program relating doesn´t have a BADI or a User-E