HT3910 Once I register my MBP and create a user account, I get a gray screen and it does nothing.

Once I register my MBP and create a user account, I get a gray screen and it does nothing.

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Similar Messages

Creating second user account on TC. No separate folder and security issues

Hi,
I've had my TC for some time, and after some start-up triuble all is working very nicely now.
That is, until I wanted to set up the TC for my girlfriends backups too. On my mac, i created a user account for the TC, and i see two folders when i connect to the TC: "Timecapsule" and "MyAccountName". Now when i did the same on the other Macbook, i get only the "Timecapsule" account, not a folder (or sharepoint) with her account name. Also, I saw that as the sparsebundle files are on the 'main' sharepoint, it is possible to access both from both computers, wierd.
Any thoughts on how I can use 1 TC for 2 computers with 2 sharepoints for both?
So, on my own computer i would have a general folder and a personal folder, on the other the same...
Help much appreciated!

To clarify: When i connect to the TC, i mount two volumes, but on the other Macbook, I only get the main volume, not the specific user volume.

How can I find the user that created a user account and the user who last updated the account

How can I find out who created a user account and who last updated the account. I think that this is the same information that is displayed in the description field on the General tab.
I am using ADO commands and vbscript
ug3j

I should point out that there are two attributes of all AD objects that can help you track down the correct information in the system logs. These are the whenCreated and whenChanged attributes. This will tell when the object was created and when it was last
modified, which should help when you search the logs. Also, while whenCreated is replicated to all DC's, so they will all have the exact same creation time, the whenChanged attribute is technically not replicated. The date/time on each DC reflects when
the last modification was replicated to that DC. The values will differ slightly on each DC, reflecting how long it took for the change to replicate.
Richard Mueller - MVP Directory Services

How to use migration assistant without creating dual user accounts

I want to use migration assistant to transfer apps, software & files on my macbook pro to my new macbook air. How can I do this without creating two user accounts for myself on the m-book air -- my account from the m-book pro & the one that the air makes me create as soon as I do start-up? Can I just use the same name & password for both? or will that make things go badly awry?
Thanks!

If you have not booted the MBA for the first time and gone through the Setup Assistant, then I would use the Setup Assistant to make the transfer before you even create another user account. However, if you've already created the new user account on the MBA, then create a new admine one with a different username than the account you will migrate. Log into this new account, delete the first account you made, then use Migration Assistant to transfer your account from the MBP.

Login page keeps going to "Create new user account" on login

For about 3 weeks, whenever I log in, the next page I get is nearly always the "Create new user account" page. This happens regardless of whether I wait to let AutoFill enter my user name and password or whether I fill in the correct info myself.
When I click the back button on my browser and finally arrive at the page with the forums list, I'm always registered as logged in. But sometimes I just end up back on the login page with a blank entry box.
How do I get to the forums page without having to get out of the "new user account" page first? (While this isn't a huge problem, it's time-wasting and kind of annoying, and it didn't used to happen.)

Hi Turtlewiz!
Have you tried deleting your browser cache & cookies?
Good Luck!
ali b

Create multiple user accounts

How could I create multiple user accounts?...
We have about 2000 students register every year and each of them will be given a user account

I managed to create many users using the command
imadmin -D serviceadmin n xxx.com -w password -i <inputfile>....
the content of the input file
l KA1000
F new
L user1
W secret
l KA1001
F new
L user2
W secret
so I have created 2 user accounts [email protected] and [email protected]....
I have one more question to ask..how can I create new accounts which have different login id and email address using the input file....for examples for login id KA1000 the email address would be [email protected].
I've tried this using ldapadd and it worked, so I would like to know wether imadmin command will work the same.....

If you can't 'Create new user account' - try this!

Over the last few days I've wasted many hours trying unsuccessfully to create a new user account so I can post to Apple Discussions. Kept going round an endless loop, back to the 'Create New User Account' form. Tried every possible solution I found through internet searches, to no avail.
The answer, for me, turned out to be simply choosing a different alias - one that nobody else was using, presumably.
Why, oh why, isn't there an error message that tells you this? It would have saved me so much time and frustration - and many other people too, I'm sure.

Welcome, finally, to Discussions - you are not the first to complain about this, if you like, you can go to app.com/feedback and register your complain there as well.

How to create a user account by mirroring another account in PowerShell (Trying to learn to use Powshell for some daily AD tasks intead of the GUI)

Hi,
I am trying to create user accounts via PowerShell instead of the Gui in server 2008 R2 (PowerShell 2.0).
I know how to create a user account with the following Power Shell command below is one from a dummy domain I created to practice.
PS C:\Users\Administrator> New-ADUser -SamAccountName "TestOut" -UserPrincipalNa
me "[email protected]" -GivenName "Test" -Surname "out" -DisplayName "Testou
t" -Name "Testout" -Enabled $true -Path "CN=users,DC=bwcat,DC=net,DC=int" -Accou
ntPassword (Read-Host -AsSecureString "Enter Account Password")
However when doing day to day tasks where I work normally we have a new hire, they contact IT and ask that a user account is created. I will ask who they would like to mirror.
I then would go into the gui pull up the user that they want to mirror right click him and choose copy. This would create a new user account that I would then fill out.
I am wondering if its possible to do this same thing via PowerShell, or if its not an option because it takes more work type up everything than it does to go into the gui and do it.
Anyway thanks for the help.

Hi Wilder, hi Mark,
first of all: The tutorial sources Mark posted - especially the book "Powershell 3 in A month of lunches" - are good to get a baseline start. A really great reference, especially when you try to learn it while still dealing with your daily business.
On another note, Wilder: While I fully agree that learning things sequentially is usually the best, I too jumped right in instead of learning how to walk first (though it's been some time now. Fewer years than you'd think, but still ...). So I thought I'd
give you a little aid with that function husk, so you could just stuff interesting bits into an available structure, making use of the fun tools in a useful context (It's fun fiddling around with the commands, but if you have to type in all of them manually
each time, using the GUI is often just faster. Doing fun things and being efficient with it feels even better though ...). So ... while I
do agree with yourself, learn it the Correct & Proper Way, I also do
intend to finish this little explanation about the husk, all the way to the end.
Everything below this paragraph is part of this.
function Copy-ADUser
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
) # Create finished Strings
$JoinedName = $GivenName + "." + $Surname
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName $JoinedName -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is again the same function husk I posted earlier. Only this time, I filled a little logic (the pieces that were already posted in this thread). This time, I'll not only go over each part again ... I'll do it by reposting the segments and trying to show
some examples on how to modify the parts. Thus some of it will be repetitive, but this way all the info is in one spot.
Segment: Comment Based Help
<#
.SYNOPSIS
A brief description of the Copy-ADUser function.
.DESCRIPTION
A detailed description of the Copy-ADUser function.
.PARAMETER GivenName
A description of the GivenName parameter.
.PARAMETER Surname
A description of the Surname parameter.
.PARAMETER Template
A description of the Template parameter.
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
.NOTES
Additional information about the function.
#>
That's the premier documentation part of a function, that teaches a user what the function does and how to use it. It's what's shown when using the Get-Help cmdlet.
Comment texts are not restricted to single lines however. For example you could replace ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
... with ...
.EXAMPLE
PS C:\> Copy-ADUser -GivenName "Max" -Surname "Mustermann" -Template "Jonny.Normal"
Creates a new user named Max Mustermann and copies the group memberships of the already existing user Jonny Normal to this new User
... and get an explanation on what the example does when using Get-Help with the
-Detailed parameter (Explaining examples is always a good idea).
Segment: Parameter
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[Parameter(Mandatory = $true)]
[string]
$Template
This is the segment that tells Powershell what input your function accepts. Each parameter of Copy-ADUser you set will be available in the next segment as a variable of the same name. You can add additional parameters if you need more information for your
logic. For example, let's add a parameter that allows you to specify what Organization the new user should belong to:
[CmdletBinding()]
Param (
[Parameter(Mandatory = $true)]
[string]
$Surname,
[Parameter(Mandatory = $true)]
[string]
$GivenName,
[string]
$Organization,
[Parameter(Mandatory = $true)]
[string]
$Template
That's how that would look like. You may notice that I didn't add the line with
"[Parameter(Mandatory = $true)] this time. This means you
may add the Organization parameter when calling Copy-ADUser, but you need not.
Segment: Logic
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
This is the part of the function that does the actual work. Compared to the first husk I posted, this time there are two commands in it (and some comments). First, I create a new user, using the information passed into
the parameters -Surname and -GivenName. Then I Copy the group memberships of the user identified by the information given by the
-Template parameter.
So, let's modify it!
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
Now after adding a few lines, the logic will tell us what it's doing (and do so before it
is taking action)!
Hm ... didn't we create a change in the Parameter Segment to add an -Organization parameter? Let's use it!
# If the -Organization parameter was set, the $Organization variable will be longer than 0. Thus do ...
if ($Organization.Length -gt 0)
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname in the Organization $Organization"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -Organization $Organization -PassThru
# If the -Organization parameter was NOT set, the $Organization variable will have a length of 0. Thus the if-condition does not apply, thus we do the else block
else
# Tell the user you are starting
Write-Host "Starting to create the user account for $GivenName $Surname"
# Create new User
$NewUser = New-ADUser -Surname $Surname -GivenName $GivenName -DisplayName "$Surname, $GivenName" -SamAccountName "$GivenName.$Surename" -Name "$Surename, $GivenName" -PassThru
# Tell the user you are copying Group Memberships
Write-Host "Copying the group-memberhips of $Template to $GivenName $Surname"
# Copy from old User
$NewUser | Add-ADPrincipalGroupMembership -MemberOf (Get-ADPrincipalGroupMembership $Template | Where { $_.Name -ne 'Domain Users' })
# Do Whatever else you feel like doing
There! Now we first check whether the -Organization parameter was set (it's not mandatory after all, so you can skip it). If it
was set, do whatever is in the curly braces after if (...). However, if it wasn't set, do whatever is in the curly braces after
else.
And that concludes my "minor" (and hopefully helpful) tutorial on how to use the function husk I posted :)
With this, whenever you find another cool command that helps you in the user creation process, you can simply add it, similar to what I did in these examples.
And if it all didn't make much sense, go through the tutorials in proper order and come back - it'll make much more sense then.
Cheers and good luck with PowerShell,
Fred
There's no place like 127.0.0.1

I have created separate user accounts for my 2 boys on my macbook. How do i get my itunes library onto their new ipods?

I have created separate user accounts for my 2 boys on my macbook. How do i get my itunes library onto their new ipods?

They can't. Which came first - the chicken or the egg? Actually, that's a bad comparison but a sync must come first.
The library is actually part of iTunes and it contains everything. iTunes is then configured so that you (or they) determine which portion of everything will be synced to each iPod (identified by a unique name, see below for an example of an iPod and an iPad). iTunes can't make that decision until AFTER it knows which iPods exist.
By the way, I (you, they) can very easily change the name of each device to whatever I (you, they) wish to call it.

I use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

i use migrate assistant to move files from my old pc to the new Mac , but it creates the user account. How can i delete the unwanted user account.

Welcome to Apple Support Communities
That's the classic behaviour after using Migration Assistant and that's normal.
To transfer the data from the new user account to your old user account, you can follow some steps. Here is all the information you need to do this > https://discussions.apple.com/docs/DOC-5472

Old user account not accessible - Had to create new user account

Why was I forced to create a new user account in order to access Apple discussions? The last time I had posted to Apple discussions was 11/06. From the emails notifying me of replies to my post, I can still go to the link where my question and the replies are. Last week I wanted to post another question. Instead I encountered a circular problem. Every time I tried to log in to discussions with my Apple ID and password (the same as my .Mac name and password, which were working fine for accessing .Mac), I was told that there was an error in my password. When I tried again, I was repeatedly re-directed to a "create new user account" web page that listed my .Mac email address as my Apple ID, as it should have. I tried to re-create my old user account with my own [real] name (as before) and was told that name was in use! Of course, it was me! (I had always used by real first name and surname as my name on Apple discussions.) So finally, very frustrated, I created a new name, a nickname, for discussions, and it worked. Now, all my previous posts are gone. It's as if I didn't exist in the Apple world until today, 9/16/07, but I originally had established my user account in 2004. I tried asking about this in a phone call to Apple support, but I was re-directed to the .Mac web site. Then I posted a question at .Mac feedback to no avail. I had a feeling that as soon as I "obeyed" and created a new user account that wouldn't be recognized as myself, my past posts would be sent into oblivion. I don't like losing all my previous posts that were attached to my user account. I have found this problem very frustrating and would really like an explanation.

Hi decemberbaby,
Try this procedure.
Delete all the Apple Cookies in your browser, and empty the Cache.
Go here Discussions Sign In, and try logging in with your original Apple ID again.
If that still doesn't work, delete the Cookies again, and go to My Info, and log in with the original Apple ID.
If you get the error message "Your Apple ID or password was entered incorrectly.", click on "Did you forget your password? Click here for assistance".
On the page that opens, you can also click on "Forget your Apple ID
ali b

MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
Run the Startup Manager to select Startup disk: http://support.apple.com/kb/HT1310
If those did not work your disk may be sick or dying. The top priority at this point is to make a backup copy of your data.
Check the health of the disk. Boot in Recovery Mode (Boot, Command-R). Run Disk Utility. Click on the upper left disk icon. Does the S.M.A.R.T. status say “Verified”? If not the disk/SSD is unhealthy and needs to be replaced. Even if it does not show “Verified” you can still attempt a backup.
Click on the icon indented below, usually called “Macintosh HD” and Verify Disk. If it finishes with a green “OK” message then all is well with the disk. If it shows errors in red then you have found a problem to address once the system is backed up. Do not attempt software repairs until you have secured the data.
If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable. A trip to an Apple store for confirmation would be in order.
If you have an external disk drive you can use as a backup drive then do so. If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one. Any 1 TB external drive will do.
Assuming it is still breathing you can try to recover the data without booting from the sick disk.
Reformat the external disk. (This will erase all data on the external disk.)
Boot in Recovery Mode. Start Disk Utility. Plug in the new disk. Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
Partition Layout > Single Partition
Name: Emergency Recovery 1 (or whatever name you wish to use)
Format: Mac OS Extended (journaled)
Options… > GUID Partition Table > OK
Apply
Select the Restore tab.
Drag the old system volume (Macintosh HD) to Source.
Drag the new disk volume (Emergency Recovery 1) to Destination.
Click on Restore.
It may take a long time for the backup.
If that will not complete post back for other emergency data recovery methods, including those from a brody.
If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk. If it does not finish with a green OK message try to repair it once or twice more. If it repairs with a green OK message, will it boot normally? If not, boot from the Recovery Partition and reinstall OS X.
If it is still not healthy, post back for further instructions.

Create a User account in active directory from SharePoint online 2013 list data

Hello,
I am trying to create a SharePoint list through which i can create a user account into active directory,
1 - HR is sending the detail in the email body to a Specific email address ([email protected]) like below..
First Name: XYZ
Last Name: ABC
Address: ABC 123
Designation: Analyst
Employee ID: 10492
and so on
2 - I need to pickup every new email data of the above section into sharepoint list (in Column)
First Name Last Name Address Designation Employee ID
3 - I want to create a event receiver through which i can go ahead and find the new data in the list and then create a user in the active directory,
I tried very hard and since i dont have much experience in coding part, any help will be highly appreciated
Thank you
Aman

1- Configure Incoming Email Setting at your SharePoint Farm -
https://technet.microsoft.com/en-us/library/cc262947.aspx
http://blogs.technet.com/b/harmeetw/archive/2012/12/29/sharepoint-2013-configure-incoming-emails-with-exchange-server-2013.aspx
2- Configure your Sharepoint List Incoming e-mail settings for [email protected] - ListSetting-Communications->Incoming e-mail settings. -
https://support.office.com/en-in/article/Enable-and-configure-e-mail-support-for-a-list-or-library-dcaf44a0-1d9b-451a-84c7-6c52e7db908e
3- Write an Incoming Email Receiver , and Add you Email Body Parsing Code (retrive value of fields , firstname , lastname etc) in
EmailReceived() method. also add the code for adding new user in Active Directory
http://blogs.msdn.com/b/tejasr/archive/2010/03/06/event-handler-code-to-add-incoming-emails-with-subject-discussion-id-as-replies.aspx
https://pholpar.wordpress.com/2010/01/13/creating-a-simple-email-receiver-for-a-document-library/
4- Active Directory Code Help -
http://www.codeproject.com/Articles/18102/Howto-Almost-Everything-In-Active-Directory-via-C
http://www.codeproject.com/Tips/534718/Add-User-to-Active-Directory
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Error message when trying to create a user account in WGM

In WGM, everytime I try to create a new account and save, this message appears:
*Got unexpected error*
+Error of type eDSAuthNoAuthServerFound (-14102)+
+on line 2112 of /SourceCache/WorkgroupManager/+
WorkgroupManager-319.2.2/Plugins/UserAccounts/
UserAdvancedPluginView.mm
What is that?
I tried to create the user accounts in Server Preferences/users but I can not login.
It seems that I get a lot trouble with leopard server. Should I reinstall it or go back Tiger?
Thanks

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

**want to create a user account from "Crypted Password" to "Open Directory"

I have create a user account with "user password type: Crypted Password"
is there any way I can script it to "user password type: open directory"
I've use perl-ldap to create user account but I don't know how to change user password type to open directory,
because my script will add a new node in the directory, I just need a way to make the "user password type" to "Open Directory" AT CREATION TIME, not modifing it after a have a user account, the script below will generate a node in the directory with "Crypted Password" as User Password Type,
is there any attribute I need to add to make it "Open Directory" or perl command, applescript, bash, objective c(hopefully not)....
thank for reading...
$res = $c->add(dn => 'uid=testing,cn=users,dc=microsoft,dc=info',
attr => [
'cn' => 'testing',
'gidNumber' => '20',
'homeDirectory' => '99',
'objectclass' => 'inetOrgPerson', 'posixAccount', 'shadowAccount', 'apple-user', 'extensibleObject','organizationalPerson','top','person',
'sn' => 'testing',
'uid' => 'testing',
'uidNumber' => '5000',
1. 'apple-generateduid' => '27318931-B341-4364-91B4-84E4AAAD1234', #026F",
'givenName' => 'testing',
1. 'loginShell' => '/bin/bash',
'userPassword' => 'testing' ,
1. 'homePhone' => '555-2020',
2. 'mail' => '[email protected]'
die "unable to add, errorcode #".$res->code().$res->error if $res->code( );
thanks

Since this question isn't Xserve specific a better place to get an answer is probably in the Directory Services forum: http://discussions.apple.com/forum.jspa?forumID=1353
That being said if you are trying to migrate Crypt accounts to OD accounts then the short answer is no. You need an unencrypted password to put the password into OD via a script do short of cracking the encrypted password, inserting it in plain text into the OD user account creation process then I don't think you can.
You should be able to dictate the password (and any other settings you can do from the GUI) but the password is the missing piece. Under really old OS X systems I actually suspect you can get passwords to export (hinted at by an Apple engineer I discussed this with) but there is probably a faster and more straightforward solution.
What I have done is export from NetInfo, clean the accounts via script and then reimport the accounts into the new system. I usually assign a password and dictate "Must change password at next login" and then email people the temporary passwords. It's been a while but I believe you can mass select and then dictate password settings so if that works for you create accounts with all the same password and then you can select by group and make changes - eg Must change password at login.
Good luck,
=Tod

HT3910 Once I register my MBP and create a user account, I get a gray screen and it does nothing.

Similar Messages

Maybe you are looking for