HT3913 Can I connect a Sony TV 32 inch to my late 2009 iMac as an external display using Mini DisplayPort to HDMI?
Seems doable--can I?
Hello, All-
I too am very interested in the answer to this query. Same set up, same fail w/the Thunderbolt cable. The Genius Bar at the Apple Store was no help & recommended I bring my 27" iMac into the store...seriously? Their ultimate answer was that I needed a plain old male-male mini display port cable....that the Thunderbolt cable was the problem. Bloody unlikely, I say. Another guy in the store agreed with me this morning, so swapped out the cable. I was hoping upon hope it was a bad cable, but no such luck—still nothing. Next I tried a mini-display-port-to-DVI adapter—DVI cable—mini-display-port-to-DVI adapter. This also did not work. Is there a chance that the iMac running Snow Leopard and the MacBook running Mountain Lion is the problem???
Similar Messages
-
Mac is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable?
Macbook Pro is not connecting to TV after using Mini DisplayPort to HDMI Adapter Cable. 2010 Macbook Pro, just purchased Mini DisplayPort to HDMI Adapter Cable from Amazon. Link here: http://www.amazon.com/Mini_Dis-HDMI-CB6-Mini-DisplayPort-Adapter-Cable/dp/B003OC 6LWM/ref=sr_1_2?ie=UTF8&qid=1406238976&sr=8-2&keywords=mac+to+tv --When i connect both ends of the cable to the TV and to the laptop, the screen will blink, but then afterwards it will not mirror on the TV. I have tried going to display setting but cannot find the arrangements tab. When i searched "arrangements" a message said, "The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer." Not sure how to fix this problem. I have connected this laptop to a TV before, but with a different cable other than the one i just purchased. Any help would be greatly appreciated, thanks.
Found the fix. Still don't know if it was Windows, iTunes, or Norton 360, but this worked immediately for me:
+++++++++++++++++
edgravel
Re: iTunes Store Won't Load, Won't Show Error Message
Aug 13, 2011 4:32 PM (in response to Daedalme)
I found a solution posted from Rodfromnework for PC users. It worked for me and easy to do.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in:
Netsh winsock reset
Hit enter, restart PC, open iTunes, go to Store
Hope it works for you too. -
Connect to 2 external displays using 2 thunderbolt to hdmi cables
I have a new iMac which has 2 thunderbolt ports. I was told that I can add 2 displays using these ports with thunderbolt to hdmi cables. However when I do this only one screen connects. The other remains blank (and off).
Hello, I wonder if HDMI isn't the problem?
It's supposed to...
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i5-2.9-27-inch-alumin um-late-2012-specs.html
Do the monitors have anything besides HDMI? -
How can I use my Late 2009 iMac as an external monitor with my new MacBook Pro 15" Retina
I want to use my iMac (Late 2009) as an external Display for my new 15" MacBook Pro Retina, I need to know what Cables to use so I can go buy them the Apple Store, I already tried a thunderbolt cable between the two and that doesn't work, but I think this might
iMAC MBP 15" Retina
Mini display Port to VGA adaptor -> VGA Cable -> Mini Display Cable to VGA adaptor
or maybe
Mini Display port to HDMI adaptor -> HDMI Cable -> HDMI Port on MBP
Pleae help I can't seem to figure it out online.
Thanks!Hello, All-
I too am very interested in the answer to this query. Same set up, same fail w/the Thunderbolt cable. The Genius Bar at the Apple Store was no help & recommended I bring my 27" iMac into the store...seriously? Their ultimate answer was that I needed a plain old male-male mini display port cable....that the Thunderbolt cable was the problem. Bloody unlikely, I say. Another guy in the store agreed with me this morning, so swapped out the cable. I was hoping upon hope it was a bad cable, but no such luck—still nothing. Next I tried a mini-display-port-to-DVI adapter—DVI cable—mini-display-port-to-DVI adapter. This also did not work. Is there a chance that the iMac running Snow Leopard and the MacBook running Mountain Lion is the problem??? -
HT3924 Can I use my 27" late 2013 imac as an external display for a gaming console?
If so, how would I set it up and how much would it cost me?
No, sorry, you can't. Pre-Thunderbolt iMacs could to this, but with Thunderbolt-equpped iMacs they can only be used as a screen for other Thunderbolt-equipped computers. No company has yet to come up with a converter that works with Thunderbolt Macs. The only way you could get video from a game console into your Mac would be via a video capture device and the inherent lag in such capture would, I think, make most if not all games unplayable.
Regards. -
Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv? I have a sony bravia 600 series and 700 series and a home theatre( sony 7100 series)
The only way to stream directly to your TV would be if it is an AirPlay-enabled device.
There are many AirPlay-enabled devices but I am not familiar with Sony's products. If yours do not specifically indicate AirPlay capability, then you need an AirPlay-enabled device such as an AppleTV connected to your Sony TV or Sony AVR. -
HT5299 can i connect my sony smart TV via thunderbolt port for better resolution.
can i connect my sony smart TV via thunderbolt port for better resolution.
You can connect the TV via the Thunderbolt port. However if the result is "better resolution" would depend on what resolution you have now (I'm guessing you mean with the HDMI adapter?)
I'm myself connecting the Mini Mac with a Thunderbolt->VGA adapter to my TV and get full 1920x1080 resolution.
Have you checked your Display settings? Make sure mirroring is off, then check what resolutions you can get on the current connection.
Please return with some more data. -
How can I connect a Sony DCR-PC110 video camera with iMovie and import my videos?
How can I connect my Sony video camera DCR-PC110 with iMovie in order to import my old videos?
Hi
This Camera has three types of ports.
- Analog-out
- USB
- I.Link = FireWire = IEEE1394 = Digital in/out = DV-terminal
And Your Camera only can send Photos via the USB-connection - NO VIDEO.
So You Must get a FireWire Cable and eventually a ThunderBolt/FireWire converter Cable to get Import to work.
There are no real way around this.
Yours Bengt W -
Can you connect a sony camcorder to a mac to edit the video
Can I connect my Sony camcorder to my mac to get the videos on my mac and edit them?
Yes, that is precisely what iMovie is for, but which camera, what version of iMovie do you have, and what version of OS X?
-
2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.
You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV. -
Connecting my macbook pro 13" to Sony bravia via mini Displayport to HDMI
Hi,
yesterday I bought a new LCD TV Sony Bravia KDL-32EX600 (Full-HD LED) that has 4 x HDMI inputs.
I also bought a mini Displayport to HDMI and HDMI to HDMI cable.
When I connect it to my computer, the screen goes blue for a second and it doesn't recognise any additional displays. There's also no video or sound in the TV, on the right HDMI channel. (I've tried every HDMI input and every channel)
I've tested the TV with another laptop that has straight HDMI output from the gfx card and it works perfectly.
I have up-to-date MacOS and I also upgraded my TV's firmware to the latest.
I thought that maybe the miniDisplayport to HDMI connector is broken but why does the computer try to do something when I turn on the correct channel on the TV?
I'm out of ideas..Hi madhenry,
I know it's a month on from your post, but I thought I'd add that I'm having exactly the same problem. I'm trying to connect my new MacBook Pro (15" core i7) to my Sony Bravia KDL-40EX600 using a mini displayport to HDMI adapter. When I plug the cable in, the MBP screen goes blue for one second then goes back to normal, but the system just doesn't detect the external display.
I've tried the MBP on other monitors and it works fine, so there is nothing wrong with the adapter or cable.
I've also tried plugging two other Macs into the TV (a 2008 15" MacBook Pro and a 2008 MacBook) and the TV works great with both of them.
So, it seems there's something specific to the new MacBook Pros that makes them incompatible with the Sony EX600 TVs.
I just talked to AppleCare about it and after trying a few things (resetting the PRAM, etc.) I was simply told that there's nothing wrong at all with the Mac and that this is simply a "compatibility" issue that I have to put up with. So, it looks like we're out of luck until (hopefully) a new Mac OS update fixes the issue.
Peter -
Hi all, I'm trying to connect my macbook pro to Sony Bravia tv using Kanex Mini DisplayPort to HDMI Cable with Audio Support , when connected to the HDMI on tv I get a picture of the mac screen saver ( the starburst ) no video/audio,any ideas? thanks, Derek
Dave I'm glad to say that it works perfectly but I'm embarrassed to say that my 12 year old nephew hooked it up in about 10 minutes.
If you have the Kanex Mini DisplayPort cable it will work, what confused me was changing the display settings in System Preferences,
and dragging the mac screen from the mac onto the tv. Sorry I cant be more helpful but you have the right cable now you need a 12 year old nephew.
Good luck Derek -
Hello, I have an Iphone 3GS and can't connect to Game Center. It recognizes my apple ID account, states it was never used with Game Center. Then asks for country, birthdate, then returns to ask country again, then birthdate, and returns to the loop. Never ends the loop unless I cancel the setup process. I have restored the iphone to the factory settings and restored the backup, but did not work. Any suggestions on what can be the problem? thank you.
I just read another post that says you can go into a game that allows for multiple players and utalizes game center and enter your account information that way. I haven't tried it yet, but it seems to work for others that had this issue.
-
Can I connect to iMac 27" as external display?
I'm considering buying 2 iMac 27" to run Windows 7.
Can I connect these two together so iMac 1 can use iMac 2 as external display and visa versa.
In other words... is the mini display port both for input and output?
If yes... does this work under Windows 7 as well?tjementum wrote:
I just love Mac hardware, and an iMac (two in my case) on a desk is just such a nice clean setup, with only one cable. Just counted 16 cables for my current PC mini tower setup with 2 screens - don't ask
Just so you know, I'm well aware of Apple's "cableless" marketing for this thing. But on my new iMac, I actually only have a single port, the FW800, that doesn't have a cable sticking out of it.
But Mac OSX is just not a nice operating system IMO
At least we can use you as an example of a 100% legitimate Mac owner of a Windows OEM install.
Anyway... I just ordered 2 x 27" iMac's. If i somehow succeeds in getting them connected in Windows, I'll post here... if not feel free to ask me, in 6 months.
Please do post back, because if someone tries it, then everyone will know if it works. I have seen reports of a PC driving the iMac display and I have done it with my MacBook Pro. I'm still not 100% sure that two iMacs will cooperate in this way. They both have the same cable connected to the same input/output port. Which one is the target? I have never heard of Windows or any PC hardware having the ability to convert a video port to input, so Windows would have to be the broadcaster. You may need MacOS X to detect the input and use it instead of trying to send out its own signal. Hopefully this won't short out the video circuitry on both.
And in 6 months when you are reinstalling Windows to clean off all the malware, you can still use the Mac machine -
How can I connect the polaroid 6500 ultrasonic sensor ranging module to DaNI 2.0 robot (which is using sbRIO 9631)?
check this post
http://forums.ni.com/t5/Real-Time-Measurement-and/sensor-on-sbrio/m-p/2030424#M11812
Maybe you are looking for
-
Condition Dependant Document Output in SRM 5.0
Hi, My requirement is to conditionally suppress the sending of the PO output if the action profile type is MethodCall (XML) and the initial PO send completed successfully. This means that on any subsequent change to a PO for this profile type, do not
-
How can I make my ipod respond to being shaken?
-
How to grant access to all workbooks to a particular responsibility?
Hi, I am new to Discoverer. i have installed OAS 10.1.2.3 and I have done EUL_SET up on my E-Business Suite R12 and now 'SYSADMIN' owns all the workbook under "System Administrator" responsibility. Now users want to see all workbooks. I need to provi
-
Remote control not starting with window
Hi there I have a X-Fi? sound card, with a remote control... I just want it to start with windows, but if I check " Acti'vete the RC when Windows Starts" , I still have to do it manually... I've already tried to reinstall entertainment center, but it
-
Error Handling subtab missing in APEX 4.2 during update page.
Does anyone know if error handling page is replaced by something else in APEX 4.2. I can't see error handling sub tab when I go for update of any existing page. It used be below page attribute at the upper right corner in earlier version.