HT3939 how to know the carrier for iphone 5 if its showing activation failed please insert a sim card
how to know the carrier of iphone 5 if its showing activation failed please insert a sim card and i don't know what sim card goes in it and if it is cdma or gsm.
i stuck on this step. i can't go further it just shows imei and meid number but iccid is displayed unknown. please help me to move further. thank u.
contact apple.
Similar Messages
-
How do i find the carrier for iphone 4 uk?
how do i find the carrier for iphone 4 uk?
Call AppleCare in the UK, they may be able to tell you.
-
Hi
my name is Al-Ameen, Am from Nigeria,actually my brother from the united kingdom sent me an iphone5, So when i insert my Sim card i discovered the iPhone is locked.
So the reason why am sending this mail is to ask for the procedure of how to unlock an iPhone from another country the amount paid and all the other information about unlocking an iPhone.
Hope to hear back from you guys.
Many Thanks
Al-Ameen.You need to contact the carrier to see if they offer unlocking and if you qualify. You may need to talk to your brother about this.
-
How much is the exchange for iphone 5s with a broken screen? in Brazil charged me R $ 999.00
If the device has not been opened by anyone (other than Apple) then it can be replaced via the Out of Warranty replacement program, $269US for the 5, 5C, and 5S?
If it has been opened by anyone other than Apple, purchase a new device. -
How to know the tables for a datasource like 2lis_17_order
Hi,
How to know the tables for a data source like 2lis_17_order, i have checked in Extract structure of that data source, only fields are visible but how will i know that these fields are getting extracted from so and so tables?
pls respond. thanks in advanceHi,
Go to RSO2 at source system, Enter data source and click on display.
if its table based then you can see table name there it self.
if its view based then notedown the view name and go to SE11, provide view and click on display. see joined table names there.
Thanks -
My iPhone5 prompts while setting up "This iPhone is not currently setup to work with carrier you are attempting to use.Please insert another SIM card from a supported carrier" or "Request that this iPhone be unlocked" How can I unlock my new iPhone5 to function properly?
That means that the phone is locked to a carrier other than the one you are trying to use.
ONLY the carrier it is locked to can authorize unlocking it.
Where exactly did you get this "new" iPhone 5? -
How to know the delay in redo log apply on Active Dataguard 11g
Hello All,
How to know the delay in redo log apply on Active Dataguard 11g...
Do we need to wait till log switch occurs?
Or is it recommended to schedule a log switch every 15 min, no matter data is updated/inserted or not in primary?
Please suggest...
Oracle : oracle 11g Release 2
OS : RHEL 5.4
Thanks
Edited by: user1687821 on Feb 23, 2012 12:02 AMHello CKPT,
Thank you for the valuable information...
We have not configured databroker.
Output of the query
SELECT * FROM (
SELECT sequence#, archived, applied,
TO_CHAR(completion_time, 'RRRR/MM/DD HH24:MI') AS completed
FROM sys.v$archived_log
ORDER BY sequence# DESC)
WHERE ROWNUM <= 10
Primary...
SEQUENCE# ARCHIVED APPLIED COMPLETED
29680 YES YES 2012/02/23 01:11
29680 YES NO 2012/02/23 01:11
29679 YES NO 2012/02/22 23:11
29679 YES YES 2012/02/22 23:11
29678 YES YES 2012/02/22 23:11
29678 YES NO 2012/02/22 23:11
29677 YES YES 2012/02/22 22:32
29677 YES NO 2012/02/22 22:32
29676 YES YES 2012/02/22 22:02
29676 YES NO 2012/02/22 22:02
Standby...
SEQUENCE# ARC APP COMPLETED
29680 YES YES 2012/02/23 01:11
29679 YES YES 2012/02/22 23:11
29678 YES YES 2012/02/22 23:11
29677 YES YES 2012/02/22 22:32
29676 YES YES 2012/02/22 22:02
29675 YES YES 2012/02/22 21:24
29674 YES YES 2012/02/22 19:24
29673 YES YES 2012/02/22 18:59
29672 YES YES 2012/02/22 17:42
29671 YES YES 2012/02/22 17:41
Primary shows yes as well as no...
Next,
From primary:-
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
THREAD# MAX(SEQUENCE#)
1 29680
From standby:-
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
1 29680
What is the redo transport service you are using? is it LGWR or ARCH ?
Output of query select * from v$parameter where name like 'log_archive_dest_2' shows below value...
SERVICE=b_stdb LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=b_stdb
So is it lgwr already configured...? if yes then how do i see the delay in both servers..
Yes, the network is good as they both resides in same LAN within same rack
Thanks... -
hi i updated my iphone but it says that This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked. how can i unlock this one?
Your iPhone was hacked or jailbroken before and through the update it locks back to the original carrier. Only the original carrier can unlock the iPhone. You have to contact them and find out what the procedure you needs to follow.
-
The SIM card inserted in this iPhone does not appear to be supported.
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.
what does it mean?Have a look in Settings>Carrier
Again YOU cannot unlock it - only the original carrier can do it -
The SIM card inserted in this iPhone does not appear to be supported.
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.Sounds like you are trying to use an iPhone that is locked to a particular
wireless carrier with the sim from another wireless carrier. Contact the wireless
provider that the iPhone is locked to and ask if they offer unlocking and if
you qualify. Only the wireless carrier that the iPhone is locked to can unlock
it. -
Dear ,
I buied I phone from USA and I sent to Iraq to use it there but when used it I get this message :
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier
so I need support to resolve this problem and procedure and how I can iPhone be unlocked.
BR,
Ammar Jumaaammarjr wrote:
... how I can iPhone be unlocked.
Sorry... but... ONLY the US Carrier it is Locked to can unlock it.
You need to Contact them.
Note: No one here will know who that Carrier is. -
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.
In your other post https://discussions.apple.com/thread/5001329?tstart=60
you say the iPhone originally was on contract with Orange UK. You will have
to work with Orange UK to get the iPhone unlocked. -
How to use the Packager for iPhone ?
Hi What`s up guys??
I Download the Packager for iPhone and i can`t used this ?
please help me and show me in picture how to use this.my question about http://labs.adobe.com/technologies/packagerforiphone/ package.
-
HOW TO Know the cube for particular data source
HI ,
How to know the standard data targets for standard data sources in sap .
can u give me the some links o it .
regards ,
srinviasHi Srinivas,
Go through this below BI Content Help. Here you will be able to find the data sources for specific application areas with the standard data models, you will find standard cubes as well.
[http://help.sap.com/saphelp_nw04/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm]
Regards,
Pratap Sone -
How can i know the price for iphone s5 in Middle East in Oman
hi..
please help me
i want to buy an iphone 5s. how can i buy it from apple store?
how can i know the real price for my country, aware that i am in Middle East exactly in Oman?
and how many time it will take to reach in my country Oman?
please help as soon as you can..
thank youAs I said, if you want to buy it from the USA online Apple store, you will need to have a credit card issued by an American Bank or financial company, you will have to have a USA billing address associated with that card, and you will have to have it shipped to a USA street address.
Aramax is a shipping company - you do not have a credit card from them and they cannot pay for your purchase. Having an account with a shipping company doesn't provide you with a USA source of payment for your purchase.
As I understand it, the Oman government does not allow the iPhone to be sold in Oman, there are no official service providers for it, and thus there is no legitimate source to buy an iPhone from within Oman.
Online Apple stores do not allow payment by foreign means or in foreign currency, they do not do currency exchange, nor do they ship internationally.
Maybe you are looking for
-
Possible reason for the iMac G5 with 10.4.3 Sleep Problems
Ok first off let me say that I got this new iMac G5 20" about 4 days ago. It's wonderful. If anyone out there is holding out for the intel machines, don't wait, get a G5. It's a fantastic machine. Now on to the meat of the subject. The story goes lik
-
My friend let me use her apple id so i could wright you guys. I cant get in to my ipod touch. I lost it a while a go and just found it. I cant rember my itunes id or password to it. I also cant rember the pass word to the ipod. Now it says connect to
-
My phone is not connecting to any wifi's what do I do?
my phone is not connecting to any wifi's what do I do?
-
Oracle Text Index - Trailing Search when the String has spaces
Hi Am trying to use CONTAINS to tune a trailing LIKE search. But it's not working when the string has spaces in between them For e.g in say if table person has column name which has following values JOHN FRED JOHNSON JOHN ROBERTS select * from perso
-
My apps such as iWeb, Garage Band, iMovie, iDVD are damaged or incomplete after I updated my OS to 10.6.6. Anyone knows whats going on?