HT3939 What is the model that is being sold in UK Apple Store?

I want to buy an Iphone in UK, but I'm not sure what model of Iphone is being sold.

Thanks, but still I need to know what is the model number (written on the Back) of the unlock iphone 5S that sold in UK?

Similar Messages

Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

Everytime I use IE, first I have to click on the IE bar to allow blocked contect to display. What is the content that is being blocked from IE? viewers may not know what the problem is and see my site totally out of format.

discoveriweb wrote:
This is iweb development where after publishing, things look different in IE than other browsers. U r correct that this is due to IE software but is iWeb related. After all, one uses iweb not to just publish in Safari but for all browsers.
Which means that you are only considering half of the problem, but that's your choice.
I'm out.

HT1420 what is the sales tax added to songs purchased from apple store?

what is the sales tax added to songs purchased from apple store?

The amount of Tax Payable varies and is dependant on your location...
You will need to investigate that yourself...

What is the likelihood that I was sold a refurbished ipodtouch 4g ? The back was very scratched when taken out of the box. Iy lives on my desk and is a week old and hardly used at all.

My new ( one week old) Ipodtouch has numerous scratches on the back side . It has never been in my pocket , I do not wear rings , it lives on my desk in its plastic case.
Could they have sold me a refurbished device as new ?
I would like to know . I cleaned the back with an optical cloth and the scratches appeared.
It has been lightly handled , my fingernails are short.

That would not have happened. you could verify that with apple by calling them and giving them the cerial number. but the aluminum back does scratch pretty easy. placing it on hard serfaces would cause scratches. i.e. a desk.

What is the app that scans and holds all of your store cards i.e. CVS card?

X

ICloud and the App/iTunes Store are different services from Apple, you can use either by logging in with an Apple ID, you don't need to use the same ID for all services on the same device.
You can both share an ID for the iTunes and App stores so you can share purchased content but each use different ID's for iCloud, so you have your own contacts, calendars etc. you can use the same ID on more than one device.

What is the iphone 4s front glass replacement cost from apple store?

I would like to know how much will it cost to replace broken fronm glass of Iphone 4s? I just bought it one month ago!

Hello,
Apple are unable to replace the front screen on iPhone 4 and i'd imagine it'd be the same with the iPhone 4S, this is because it causes internal damage to the hardware inside the iPhone. When i had my iPhone replaced, it cost me £139, for a brand new (iPhone 4, 32GB, Black) but be aware the prices may change.
Hope this helps.

What are the models of nokia that has 3d graphic a...

What are the models of nokia that has 3d graphic acceleration??

yep petrib u are 100% correct. i dont see why they did not add 3D Acc. in N96.
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

What SSD brand/model that use in the iMac 2011 model?

I am thinking get the New iMac that release couple days ago. I wonder what SSD brand/model that they are using? I don't want to pay $600 for some crappy SSD.
Thanks

Apple always uses the crappiest components in their computers. This assures that they constantly fail and fall apart within days.
What sort of goofy question is this? Go to an Apple store, find a demo, open System Profiler to find out.

Itunes could not restore the iphone because the backup was corrupt or not compatible with the iphone that is being restored what do I do?

I get the message itunes could not restore the iphone because the backup was corrupt or not compatible with the iphone that is being restored when I try to restore my phones backup what do i do I downloaded itunes to my computer (pc) and it wiped out my phone and now it won't restore the backup

Had the exact same problem whilst upgrading my iphone 4 to ios5. Lost all my data.
Backed up ios 4.3 (8F190) iphone4. Upgraded to ios 5.1 (9B176), and then tried to restore.
No joy, repeated the restore attempts countless times - lost all my data
Tried again with a simulated test.
Created a new itunes account on a new PC (64-bit windows 7), latest itunes(10.6.1.7- 64 bit).
As my data is toast, I'm using the ios 5.1 phone to try to see if it was me or an apple bug, or something elsewhich caused this to happen.
After quite a few more hours at it, it looks like a bug in iTunes / ios. I would be very happy to be wrong, though.
Tried repeatedly restoring an ios 4.3 backup to 5.1 - no joy.
Happy to try again - it does restore partially (got the call register transferred, but no SMS'es or anything else).
Any ideas?

What r the steps that involve while v r using DBCONNECT AND UDCONNEC

Hi All,
What r the steps that involve while v r using DBCONNECT AND UDCONNECT AND IN WHICH DIFFERENT SCENARIOS V USE THEM.
REGARDS
KK

Hi,
To Configure UD Connect on the J2EE Server for JDBC Access to External Databases;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
To create Driver on JDBC side
http://help.sap.com/saphelp_nw70/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm
Configuring the BI Java Connectors
http://help.sap.com/saphelp_nw70/helpdata/en/43/e35b3315bb2d57e10000000a422035/frameset.htm
Then to extract data use this...
Before you can transfer data from UD Connect sources into BI, you have to generate the metadata (the information about the source object and source object elements) in BI, in the form of a DataSource with a function module for extraction.
If your dataflow is modeled with objects based on the old concept (InfoSource 3.x, transfer rules 3.x, update rules 3.x), you can generate a DataSource 3.x for transferring data into BI from a database source system.
Prerequisites
You have modeled the InfoObjects that you want to use in the InfoSource and the data target or InfoProvider according to the UD Connect source object elements.
Note the following background information:
Using InfoObjects with UD Connect
Data Types and Their Conversion
Using the SAP Namespace for Generated Objects
Procedure
You are in the Modeling InfoSource tree of the Administrator Workbench. First create in InfoSource and activate the communication structure. Then generate the generic DataSource using the wizard in the InfoSource maintenance.
1. Choose InfoSources ® Your Application Component ® Context Menu (right mouse click) ® Create InfoSource.
2. Select the type of the InfoSource.
3. Under InfoSource, enter the technical name of the InfoSource, and assign a description and choose Continue.
The system creates an InfoSource and shows it in the InfoSource tree under your application components.
4. In the context menu of the InfoSource, choose Change .
The communication structure maintenance screen appears.
5. Using the previously modeled InfoObjects, create the communication structure (see Communication Structure).
6. Save and activate your communication structure
7. In the dialog box that follows you will be asked whether you wish to activate the dependent transfer program. Choose No.
8. In the InfoSource menu, choose Extras ® Create BW DataSource with UD Connect.
You get to the dialog box where you can assign a UD Connect source object to a DataSource and then generate the DataSource with the extractor. The fields for the DataSource are already being displayed in the table on the left side of the screen. The fields have the same name as the InfoObjects that you have used in the InfoSource.
9. Select the RFC Destination for the J2EE Engine.
Make sure that the local server is running. If the local server is running and you cannot open the table for RFC destinations, start the local server again.
10. Choose the UD Connect Source in which the data that you wish to access is located.
All available sources that are connected to the J2EE Engine are provided for selection in the input help. n instances are available per adapter.
11. Select the UD Connect Source Object.
All available source objects that are available in the selected UD Connect source are provided for selection in the input help. Source objects can be multi-dimensional storage or relational objects.
The system generates the name of the DataSource in the namespace 6B.
The DataSource is then replicated in BI.
The myself system is assigned to the InfoSource as source system as well as the DataSource.
The system generates a proposal for the transfer rules.
Since the DDIC structure and the function module are located in the SAP namespace, the following entries can be requested during generation:
Developer and object key or
Developer key or
Object key and
Transport request
If you do not make the requested entries, the generated infrastructure is not usable.
14. Change or complete the transfer rules as needed. For example, if a source object element is not assigned to a unit InfoObject, you can determine a constant for the unit, such as EUR for 0LOC_CURRCY (local currency).
15. Save and activate your transfer rules.
Recognizing Manual Entries
You can enter and change the RFC Destination, UD Connect Source and UD Connect Source Object manually. In order to validate these entries and the ones that depend on them, choose Recognize Manual Entries. For example, if you change the selected RFC destination, all of the field contents (US Connect Source, UD Connect Source Object, list of the source object elements) are invalid. If you choose Recognize Manual Entries, the dependent field contents are initialized and have to be maintained again.
Result
You have created the InfoSource and DataSource for data transfer with UD Connect. In the DataSource overview for the myself system, you can display the DataSource under the application components Non-Assigned Nodes.
When modeling InfoObjects in BI, note that the InfoObjects have to correspond to the source object elements with regard to the type description and length description. For more information about data type compatibility, see Data Types and Their Conversion.
The following restrictions apply when using InfoObjects:
Alpha conversion is not supported
The use of conversion routines is not supported
Upper and lower case must be enabled
These InfoObject settings are checked when they are generated.
Based on the large number of possible UD Connect sources, the most diverse data types are possible in the output system. For this reason, a compatibility check is made at the time of generation of the UD Connect DataSource that is based on the type information supplied by the source systems. This attempts to decrease the probability of errors during the extraction process.
(Refernce:SAP Notes)
Hope this helps,
regards
CSM Reddy

HT4972 After upgrading iPhone 4 to iOS 5.1.1 getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored" HELP!

I attempted to upgrade my iPhone 4 to iOS 5.1.1. I selected 'back up' from the phone in the device menu and iTunes confirmed that the phone had been backed up. I then installed iOS 5.1.1 which wiped everything on the phone & now I am getting the error "iTunes could not restore the iPhone because the backup was corrupt or not compatible with the iPhone that is being restored".
I have tried restoring factory settings but iTunes simply will not restore from back up & I'm not sure what else to do!
Any advice would be much appreciated.

I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on. If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.

What are the entities that can be re-used in different servers, SI App, SI instance? And how?

Greetings,
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
e.g. can I use a deployed IQStreamable@app1 into app2?
can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
It is mentioned one of the deployment option is "Deployment: Standalone Server"
and it mention the following:
"Use this option for the following scenarios:
- Metadata objects need to be shared between applications
- Event Types
- Adapter Types
- Query Templates
- A data source registered with the server provides an event stream for another existing application"
Could you please provide good example that explain the above statement?
Cheers, Muhammad

First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

What is the model number of the unlocked iPhone 5s sold in hong kong?

Under apple's tech spec section they show 4 model numbers for Hong Kong but don't indicate which one is the unlocked version - the way they show data is very confusing - even if you put the phone in your shopping cart it shows a different "part number" than the model numbers shown for hong kong. I'm trying to compare bands and frequencies as I live in mainland China, and will be headed back to the US to live in about a year.

Thanks, but still I need to know what is the model number (written on the Back) of the unlock iphone 5S that sold in UK?

What are the Models for all iPod touchs in iOS? And what are the Model Numbers on the back of the all iPod Touch

I'm trying to figure out what is the Model in iOS for the iPod Touch 1st Gen to iPod Touch 3rd gen, also I'm trying to figure out the model number on the back of it, are you able to check the Model in iOS to see what Gen? Or what is that for?

Here you go, http://support.apple.com/kb/HT1353

1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

HT3939 What is the model that is being sold in UK Apple Store?

Similar Messages

Maybe you are looking for