HT3957 built in camera in my late 2008 macbook
the built in camera in my late 2008 macbook does not connect when I try to use ichat or Photo Booth. I've tried so many different trouble shooting options, but cannot find the solution. Suggestions?
Have you reset the SMC and pram?
To reset the SMC
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Similar Messages
-
I had a copy of Mountain Lion on my late 2008 MacBook Pro, having replaced Lion which it came with. But the drive crashed, so I replaced the drive and reinstalled Lion from the original disks I had. How do I get another copy of Mountain Lion?
A 2008 Mac won't have originally shipped with Lion. You need to install 10.6.8 on the computer, log into the Mac App Store with the Apple ID you used to purchase Mountain Lion, click on the Purchases tab, and download it.
(121465) -
Hello. I recently pieced together a late 2008 MacBook Pro 15". Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
4SNS/1/40000000 LB1T
I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer. Would you know how I can find the sensor to test it? Could my battery problem be related to something else? Would a fresh install of Lion help?
Thank you!
Mike
Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.Why do you have LION installed on that older machine?
So you say you built a macbook from a bucket of parts eh? Kudos
heres a pic of the battery temp sensor -
Hi, I have a late 2008 Macbook - I upgraded it from Leopard to Snow Leopard a year ago and things ran relatively smoothly. A friend suggested I try Mavericks after I have been getting a few error messages with snow leopard and was forced to hard restart. I upgraded to Mavericks last night - the installation went smoothly, however Macbook has since begun freezing every time I am using it for more than 5 minutes. I checked some other discussion forums and I wasn't having the same problems as others - Chrome is updated; I don't use Apple Mail; don't have a lot of third party software (I think). I downloaded EtreCheck and ran on both safe mode and normal mode - things seemed relatively normal except I hadn't backed up my time machine (woops). I saw that Sophos was running a lot on start up - I don't use it so I uninstalled it using the developers instructions (Library/Sophos/Uninstall_Sophos) and than trashed the Launch Daemons that were com.sophos...
So far nothing has solved my problem. My macbook will start in both modes - but only functions in safe mode. It will run smoothly in normal mode for 5 minutes or so - and I am honestly not sure what triggers the freeze. I copied numerous log files to see if someone could help identify the problem (they run through 2 hard shut downs and finally a restart in safe mode) as well as the safe mode EtreCheck report. I can get a non-safe mode EtreCheck if that will be helpful, just let me know.
Anyone have any advice on what my problem is? Thanks!
Link to Log: https://www.dropbox.com/s/5ux2r8i972orf37/Macbook%20Mavericks%20Fail.log
EtreCheck (Safe Mode)
Hardware Information:
MacBook (13-inch, Aluminum, Late 2008)
MacBook - model: MacBook5,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:21:47
Disk Information:
TOSHIBA MK2553GSX disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 249.2 GB (131.24 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5960S
USB Information:
Apple Inc. Built-in iSight
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.ucupdate.plist
Problem System Launch Agents:
Launch Daemons:
Launch Agents:
[not loaded] com.google.keystone.agent.plist
[not loaded] com.hp.messagecenter.launcher.plist
[not loaded] com.sophos.uiserver.plist
User Launch Agents:
[not loaded] com.divx.agent.postinstall.plist
[not loaded] com.facebook.videochat.robertdow.plist
[not loaded] com.spotify.webhelper.plist
User Login Items:
None
3rd Party Preference Panes:
Flash Player
Growl
Native Instruments USB Audio
Perian
Internet Plug-ins:
Default Browser.plugin
DirectorShockwave.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
Silverlight.plugin
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin.plugin
Move-Media-Player.plugin
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Auto backup: NO
Time Machine not configured!
Top Processes by CPU:
31% Google Chrome
4% mds
2% WindowServer
1% mdworker
1% EtreCheck
0% hidd
0% fontd
0% imagent
Top Processes by Memory:
156 MB Google Chrome
139 MB com.apple.IconServicesAgent
106 MB Google Chrome Helper
90 MB Finder
82 MB Console
74 MB com.apple.quicklook.satellite
53 MB SystemUIServer
49 MB CalendarAgent
49 MB com.apple.ShareKitHelper
49 MB Dock
Virtual Memory Statistics:
1011 MB Free RAM
1.71 GB Active RAM
733 MB Inactive RAM
348 MB Wired RAM
414 MB Page-ins
0 B Page-outsHi Carolyn,
Went through step 1 - macbook froze. Went through the second internet plugins trashing - and it froze. It's almost as if it begins processing super slow at some point and then the cursor goes beach ball and eventually I can't do anything. I did another EtraCheck run when I had it started in normal after I erased the internet plugins and I also have the log files that start exactly when it froze up again. See Below:
EtraCheck
Hardware Information:
MacBook (13-inch, Aluminum, Late 2008)
MacBook - model: MacBook5,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:3:6
Disk Information:
TOSHIBA MK2553GSX disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 249.2 GB (131.05 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5960S
USB Information:
Apple Inc. Built-in iSight
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.sophos.nke.swi (9.0.53)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.hp.messagecenter.launcher.plist
User Launch Agents:
[loaded] com.divx.agent.postinstall.plist
[loaded] com.facebook.videochat.robertdow.plist
[loaded] com.spotify.webhelper.plist
User Login Items:
None
3rd Party Preference Panes:
Flash Player
Growl
Native Instruments USB Audio
Perian
Internet Plug-ins:
DirectorShockwave.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
Silverlight.plugin
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin.plugin
Move-Media-Player.plugin
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Auto backup: NO
Time Machine not configured!
Top Processes by CPU:
4% WindowServer
2% hidd
1% EtreCheck
0% mds_stores
0% fontd
0% configd
0% SystemUIServer
0% System Events
0% imagent
Top Processes by Memory:
119 MB com.apple.IconServicesAgent
78 MB Finder
53 MB SystemUIServer
49 MB CalendarAgent
49 MB com.apple.ShareKitHelper
45 MB com.apple.dock.extra
45 MB soagent
45 MB EtreCheck
41 MB NotificationCenter
41 MB WindowServer
Virtual Memory Statistics:
1.78 GB Free RAM
1.34 GB Active RAM
288 MB Inactive RAM
363 MB Wired RAM
196 MB Page-ins
0 B Page-outs
Log Files:
https://www.dropbox.com/s/hbutqg9cxx3vmy5/Most%20Recent%20Mavericks%20Fail.log
Any other advice? -
Late 2008 Macbook Pro: Which power adapter?
Hello all. I have a Late 2008 Macbook Pro 15", MacPro5,1. A few months back my dog ate the power adapter (unplugged, thankfully.) I thought I did the proper amount of research to order the correct adapter from a third party on Amazon, because I'm pretty darn broke and need to save every penny I can. When I got the adapter, the connector was different from the one that came with my Macbook Pro. It was 85W, all the numbers matched up, but the style was different. But, the plug worked enough to let me get the work done that I needed, so it didn't concern me too much.
That is, until this cord just stopped working. That's what I get for getting a third party cable from China off Amazon.
So now, I'm trying to research again to make sure I'm getting the right cable, and I want one that's made by Apple, and is exactly like the one that came in the box when I bought my Macbook Pro new. I went to MacSales.com and checked their compatibility pages, and ran into some issues. What is showing as compatible with my Mac is the 85W Magsafe MC556LL/A, but this is shown with the incorrect connector (like the one I got off Amazon.)
When I looked at the other adapters that were available, I found the MagSafe 2 85W MD506LL/A, which has a connector that looks like the original, but it only shows as compatible with 2012+ Retina Display Macbook Pros.
So, do I have to buy the MagSafe that is not like the original that came with my Macbook Pro, or can I get the MagSafe 2 that does match what I got out of the box?
Reference pages from MacSales.com:
http://eshop.macsales.com/item/Apple/MC556LLA/
http://eshop.macsales.com/item/Apple/MD506LLA/Thanks! I didn't realize there was a revision, but that makes sense. I guess I don't understand they would change it, then use the original design for the later Retina Display models. Oh well, as long as it works!
On a similar note, is OWC the best option for a cheap Apple-brand adapter? They're selling them for $47, when the cheapest I can find anywhere else is like $75. They seem pretty reputable with all the options and Apple-specific stuff they offer, I just didn't want to make the same mistake again and would like other options if they are available.
Thanks again! -
How do I revert to Snow Leopard from Yosemite on late 2008 MacBook with no optical drive?
Late 2008 MacBook. I don't need to back up, just to go back from Yosemite to Snow Leopard without a working optical drive.
Thank you.If you have a Time Machine backup from Snow Leopard, then use it to restore from. Other than that, you will need to get an optical drive and run your install disks that came with your computer. Of course, you will need your Snow Leopard updater if you still have it since you can't get it from the App Store.
I may be wrong about it not being available. I found a like from apple where you can still purchase it. It may still work.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard -
Reinstal Mac OS X, iWork09, iLife09 on Late 2008 Macbook Pro unibody ques?!
Alright so I've got a quick question for you knowledgeable people, I've got a late 2008 macbook pro unibody and has unfortunately installed some crap on my hard drive since i got it, and i want to be just like i got it out of the box. I want to delete everything off my hard drive, like completely erase, do I do that using the disk utility application or could i erase it completely with the mac OS X install disk that came with my mac? That's the specs of my harddrive(Hitachi Media Total Capacity : 232.9 GB (250,059,350,016 Bytes). When I reinstall my mac OS X, I will be waiting for Snow leopard (because its only $30 bucks if an upgrade), since they say the footprint of that O.S. will be considerably smaller that os x. but before i install snow leopard i want to reinstall my iwork and iLife programs, which are both 09. This leads to the next question that i have, my mac shipped with iLife and iWork 08 and I bought versions 09 after. They are single licenses and I want to know if I will be able to reinstall iWork09 and iLife09 after my reinstall of OS X without buying them again.
Thanks for any help in advance.;)Welcome to Apple Discussions!
Here's an article on Installation options:
http://support.apple.com/kb/HT1545?viewlocale=en_US
It should give you clear instructions on how to proceed. You will boot from your install disc to do the Erase and Install. To erase the boot drive, you will use the Disk Utility that is on your install disc.
You have the iLife 09 and the iWork 09 discs? Then you should be able to reinstall them from the discs after installing the OS. The single license means that you are licensed to use them on only one computer at a time.
Be sure to make a good backup of anything you want to keep before erasing your drive and reinstalling the OS.
Incidentally, you can save a few GB's of space if you do a custom installation and eliminate any languages and printer drivers you won't ever use.
Good luck! -
Does anyone know about the WIFI problems with the late 2008 Macbook 2.0?
I need a Macbook but I can't afford a new one. So I'm looking into purchasing a late-2008 Macbook 2.0.
In my research I came accross a review which said that they were having some problems with WIFI and attributed it to the metal case.
Has anyone heard of this problem and has anyone found a solution for it?
Thanks for your help.
EdLook at the box to the right titled More Like This ----------------------------------------------------->
-
New macbook pro battery for late 2008 macbook pro dies fast.
I have a late 2008 macbook pro 2.4 HGz Intet Core 2 Duo with 2 GB of ram. I've had it since 2009 and just got a new battery, as the old one finally gave up. That being said, the new battery dies quite fast and I'm not sure why. Any suggestions would be greatly appreciated! thank you
Only problem is that maybe the battery you were sold was manufactured around the same time as the Mac. And LiPo batteries die because of old age as well as use. Take it out and carefully examine all markings, especially anything that can date when it was made, like copyrights or such.
With that evidence you can go back and demand a refund. -
How do connect my late 2008 Macbook to a TV?
I want to connect my late 2008 Macbook aluminum to a tv by HDMI, and i was thinking about getting the "Moshi Mini DP to HDMI Adapter with Audio Support" but it will not support audio for my Mac. Any other way I can connect it to the TV?
If you connect the MacBook using a Mini DisplayPort to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug. The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
With the Late 2008 model 5,1 Aluminum Unibody there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2 -
How to connect a late 2008 macbook pro to hd tv
I have a late 2008 Macbook Pro and want to connect it to my HD TV what cables do I need ?
looks like if you'll use exactly this adapter you'll get audio over HDMI
-
I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton -
I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model. I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need? What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases. How can I accomplish this?
My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive. Is there a way to just access just my hard drive without interfering with hers?
I know this is lengthy. Thanks to whoever looks at this and offers advice/instruction.the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later. A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files. -
I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.
Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!
-
Data Recovery from Late 2008 Macbook Hard drive?
I have a late 2008 Macbook. It was recently dropped by a child, resulting in it no longer turning on. (It worked one time when tried within about 12 hours after the fact and then wouldn't get past the Apple logo and spinning wheel on startup). I brought it to the Apple store and was told they were 99% sure it was just a failure in the hard drive cable. Unfortunately, I received a call sometime later saying it was not the cable, but the hard drive itself.
I am planning on having Apple replace the hard drive, but I am hesitant to pay them the requested $99 to retrieve data from the hard drive (which they say they believe they could do). I do not have an up-to-date version of Time Machine because I had been traveling for nearly a year with my Mac and had left my hard drive at home and, of course, this incident happened right after my arrival.
I was hoping I could do something like Firewire Target Disk Mode using my iMac ( http://support.apple.com/kb/HT1661 ), but cannot do so because my Macbook does not have a Firewire port.
Does anyone have any solutions? If my only option is to pay Apple then I am resigned to that, but as I already have 95% of my data backed up & I only want a few files from a project I had invested quite some time into, I am hoping there is a way to recover the data myself.
Thanks in advance for your help.I may have missed it ... late 2008 there were still the plastic-bodied macbooks and the aluminum-bodied macbook. I'm told the plastic macbooks have a max disk drive capacity of 500GB, and the aluminum-bodied macbooks are good upwards of 1TB. An important point to check is the drive height. Normal is 9.5mm (I believe all WD Scorpio Black drives are 9.5mm). Some are 12.5MM and some are less than 9.5mm. See what you have today, and likely it's 9.5mm, so replace with same. If you're in the US, you might confirm max capacity with OWC who also sell hard drives.
One other option .... a little more expensive, however, you could install a solid-state drive in your macbook. If you're able to use a smaller size, a 240GB drive is around $240 at OWC. Significant speed pickup for disk operations. If you consider this, remember for capacity you need to allow 10% or more for systems usage.
Going from Leopard to Mountain Lion, you may want to upgrade to current iLife programs. The only one no longer offered is iDVD, however. If you want a Snow Leopard level of iLife, Amazon or hardcoremac.com should still have the iLife package available.
Maybe you are looking for
-
How to resolve the error "Invalid Annotation Object" ?
@
-
Using the click wheel, I can pause easily but turning the iPod off is really difficult. I don't know whether I'm holding the Pause button down too long, not long enough or if there's an easier way. It seems when I turn my iPod off the battery lasts l
-
Experts, We are in the processing of migrating a Co Cd from Non-SAP system to SAP System and we were planning to take care of the tax thing manually for now and then have it automised. However it looks like when you are doing FB60 - You can enter the
-
I maintain over delivery tolerance in customer master record to be 0.5% Now when I create order. [VA01] the over delivery tolerance in sale order item is 0% Then I investigate and know that I must maintain in customer mat info [VD51] too. But I want
-
Alternative AppsLocalLogin.jsp
I want to restrict all users from logging into the system with some exceptions. To achieve this I want copy the AppsLocalLogin.jsp to XXAppsLocalLogin.jsp and provide this to the list of users who are in the exception list. I will also replace the Ap