HT3964 a letter not recognized on pad

I have an Imac that the key board Y was broken. I purchased a new wireless keyboard and still the letter y is not recognized. Do I need to reset something in the settings?'

Primus - that is exactly what our ZVM does, charges on the USB but will not dock. I tried reloading drivers, checking devices, but it does not show up anywhere. I tried to open it with Creative Explorer - nada, it says there?was no device connected. I am going back to Best Buy today, to try and take it back, or let them try something. Bad, Bad Creative. If I didn't use subscription music, I would get an Ipod in a second.... BTW - there is lots of tips on the other Creative board for media devices too for ZVM. I tried them all, and nothing, but there is lot there....

Similar Messages

My I phone and I pad are not recognized by I tunes anylonger. Why? Waht to do?

My I phone and my I pad are not recognized by I tunes anylonger (it used to be, I do not know waht happened). Why? What to do?
Help, please.

Hello Dora Lucia,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario

Windows suddenly not recognizing iPod Shuffle - drive letter conflict

If you're having troubles with your PC not recognizing your Shuffle even though it used to recognize it in the past, this is just something else to consider (sorry if it's already been covered):
When I originally connected my Shuffle to my laptop on my home network, it was recognized immediately, and my WinXP OS assigned it the drive letter "I". Later, with the Shuffle no longer connected to the laptop, I was setting up my home network, and I mapped one of my shared network locations to the "I" drive letter on my laptop. The next time I plugged my Shuffle in, Windows would not recognize it. I proceeded to plug it into both of the other computers on my home network, and it was recognized immediately on both of them. So I then went back to the original laptop, disconnected the network drive mapping I had set up for "I". Once I did that, when I plugged my Shuffle back in, the Shuffle was again being recognized immediately (not surprisingly, still as drive letter "I"). In short, Windows has a memory of drive mappings made in the past, and sometimes this can produce unexpected or unwanted behavior (I would have expected my Shuffle to automatically be assigned the next open drive letter, but alas, that was not the case in my experience).
To minimize the possibility of running into this problem again (in case I do more network drive mapping in the future), I used the Disk Management utility in WinXP to change/force the Shuffle's drive letter on my laptop to be "Z" (right click on My Computer and choose Manage, then look for the Disk Management module - you probably will need Admin rights to do this, but I haven't confirmed that).
PC Windows XP Pro

Had this happening too, had a very old cable, tried a new cable and it worked great. My ipod was showing up in itunes, but not in windows (or in device manager). When I tried to use the utility to copy files from my ipod to my hard drive I couldn't do it (wonderful utility getsharepod.com). The new cable solved the problem!

Numbers for dial pad not recognized connected to o...

Hi,
When being connected to a bank (fixed line) support number through Skype I have to choose an option in their systems menu through the dial pad to be connected to the right department. However their system is not recognizing numbers picked from the dial pad and asks again after which the call is disconnected.
Please advise?
Thanks in advance ErikT

You can uninstall current version of Skype from the control Panel and you can install Special Version.
http://www.skype.com/go/getskype-sse
and disable automatic updating of Skype.
In Skype, Tools >> Options >> Advanced >> Automatic updates >> Click on Turn off automatic updates >> Save Changes.
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Can iMessage be used with non iOS 5 users, ie non-apple users. My new i-pad 2 error message says these contacts are not recognized by imessage when I try to text some of these contacts.

Can iMessage be used with non iOS 5 users, ie non-apple users?
My new i-pad 2 error message says these contacts are not recognized by imessage when I try to send them a text.

So that means that I can send text messages through my i-phone to reach non iOS 5 users, but not through my i-pad 2.

After installing fedora in my laptop touch pad is not recognizing by OS

am having lenovo 3000 g430 , yesterday i installed fedora 7 in my laptop.
installation was successfull but the touch pad is not recognizing , is there any way to resolve this issue
thanks in advance

Kenz,
Here is the link for the touchpad driver for fedora
Have you tried to enable "gsynaptics touch"?
You will have a file called xorg.conf in the etc directory '/etc/X11/xorg.conf' .It should look something like this
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
# keyboard added by rhpxl
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105+inet"
Option "XkbLayout" "us"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Add this section below the keyboard but above the video card:
Section "InputDevice"
Driver "synaptics"
Identifier "TouchPad"
Option "SendCoreEvents"
Option "Protocol" "auto-dev"
Option "SHMConfig" "on"
Option "Emulate3Buttons"
Option "VertTwoFingerScroll" "false"
Option "HorizTwoFingerScroll" "false"
Option "HorizScrollDelta" "0"
Option "TapButton1" "0"
Option "TapButton2" "0"
Option "TapButton3" "0"
EndSection
and then add this to the server layout section just below the line for the keyboard:
InputDevice "TouchPad" "CorePointer"
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

IMac powers up fine. Wireless keyboard and tracking pad not recognized. Power lights blink twice, repeatedly. Any ideas?

My iMac was off during a recent thunderstorm. When I power up the computer all is fine. However the wireless keyboard and track pad are not recognized by the computer. Their power lights blink twice, go off, then blink again. Any suggestions?

Turned out that I had to disconnct the keyboard from the new iMac in order to show in the old iMac.

My I pad is not recognized by Windows Vista

My IPAD and IPOD are not being recognized by Windows Vista.... Any suggestions?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

I pad is not recognized in i tunes

I am unable to get the ipad to be recognized in itunes; it is fully charged and connected via the usb cable provided. I have an iphone and have had not had this problem with that device. I tried shutting off/rebooting/resetting the ipad as instructed on the support page, but I can't get the red arrow to show up and can't get the apple logo to shut off when pressing the arrow and the home button. What next?

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
iOS: “Not enough free space” alert when trying to sync
http://support.apple.com/kb/ts1503
You may need to delete iTunes on your computer and then reinstall.
How To Completely Uninstall and Remove All Traces of iTunes
http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
 Cheers, Tom

I bought a new computer and installed itunes but it will not recgonize i pad

how do i get my computer to recgonize my i pad ?

You can try this - quit iTunes, reboot your PC, restart the iPad and then try again. Use a USB port on the computer - do not use a hub. Remove any unnecessary USB devices while you are trying to iTunes to see the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If those things to be prove unsuccessful .....
Apple - Support - iPad - iTunes Assistant
iOS: Device not recognized in iTunes for Windows

5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

IPod Shuffle Not Recognized In Windows Or iTunes v7.0 - What Now?

Hello everyone,
I am having the same problem as many who have posted here. I have upgraded my software to iTunes v7.0.1.8. I also accepted the auto update for my iPod Shuffle - 512GB 1st Gen to v 1.44 (I believe). Of course, now my Shuffle is not recognized in iTunes and is only recognized in Windows for less than 5 seconds (as I have monitored it). I am listing below all of the actions I have taken today.
As none of these have worked, my question is now what? Does anyone have any other suggestions before I take the dreaded step of calling support? Any help is appreciated.
I am not happy with this upgrade issue at all. I expect much better from Apple.
Steps Already Taken:
1. Reset iPod.
2. Set Terminal Services to "Manual" and restarted my laptop PC.
3. Changed all USB Root Hub entries power management options to "Allow the computer to turn off this device to save power option" and rebooted.
4. Assigned my external hard drive a different letter as it was assigned to "E" and tech support documentation suggested I changed it - I changed it to "M".
5. I stopped the iPod Service via the Services and Application interface from My Computer/Manage, reattached the Shuffle, and started the iPod Service. The Shuffle was still not recognized.
6. I uninstalled iTunes 7.0.1.8, the Apple Software update and QuickTime. I deleted all temp directories; program files folders and all possible traces of all three pieces of this software. I also deleted my iTunes library. I reinstalled all of this software and re-built my Library. NONE OF THIS WORKED!
My 30GB Video iPod works fine and always has - it is only the shuffle for which I have this issue any only since the upgrade.
What do I do now? If no one has another fix, I will be forced to call Tech Support after an experience with them over a year ago I would almost rather throw this thing away!

qswh - I too cannot play the songs that are loaded on the shuffle. Additionally, I get a green & orange light when I plug it into a USB port and then I either get a blinking orange light or a solid orange light from there after.

TS3694 My Ipod is not recognized by Itunes with my Windows 8 PC. Works fine with Windows 7 PC. Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive

Need help? Some of my Ipods are not recognized by Itunes with my Windows 8 PC. (Ipod Nano 4th gen and Ipod Nano 6th gen), but on my Windows 7 PC, they work fine. My Ipod 3rd gen and Ipod shuffle work both on Windows 8 and 7 PC's. On the non-working Ipods, the Device sync test says "No device found". Already performed all of the Ipod device troubleshooting including reload Itunes, stop start Ipod device, changed drive letter...
any help is appreciated. Chris4sail

Hello there, chris4sail.
The following Knowledge Base article offers up some great step-by-step instructions on troubleshooting your iPod not being recognized in iTunes:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

IPod not recognized by itunes, driver device won't install?

I've been at this for hours and I'm becoming rather frustrated. I've been using my 4g ipod touch since christmas and it's worked fine. I plug it into my new laptop, and it tells me that the device driver needs installed. I let it install, yet it's still not recognized. I go through the device manager and attempt to update the software, and every time it tells me that there is some kind of error and the update cannot be made. I've tried everything under the troubleshooting methods. Does anybody have any clue what is causing this? Any help is greatly appreciated.

Here is a tutorial for how to fix your usb not recognized,
_*NOTE: Be sure that all of the usb ports are unplugged ;)*_
Tutorial:
1)a)Go to home button, and search regedit
1)b)And go to HKEYLOCALMACHINE/SYSTEM/CurrentControlSet/Services/Usbstor click it.
1)c)- In the usbstor there is a file named ErrorControl and double click it. And it says value 1 change it to 3 and save it.
2)a)Go to Windows/System32/DriverStore/FileRepository/ And click the file named
usbstor.infx86_neutral83027f5d5b2468d3 and double click it, and copy the files named usbstor and usbstor.pnf
2)b) Go to C:Windows/inf and paste the files you have copyed.
2)c) Reboot your computer and your usb cable works again
Message was edited by: Altdorf

Ipod not recognized by Itunes, please help!!

Hi,
When I connect my ipod to my computer the follwing message comes up-
"USB device not recognized- One of the USB devices attatched to this computer has malfunctioned and windows does not recognize it."
I've tried everything I can think of... downloading the latest software updates and the latest versions of itunes etc but still no progress.
When I attempt to configure the ipod using the software supplied with it or one of the software updates issued on the site the ipod and computer both freeze and nothing happens.
The Ipod is recognized by my computer but there is no sign of it in itunes.
Has anyone got any suggestions!?
Any ideas would be greatly appreciated,
Thanks, James

>I should mention that on my second try installing it I was able to upload songs to it, however it seemed that the songs I unchecked made it and the checked ones did not.
Hmmm... it may have to do with the song format?
iPod: About compatible song formats
Let us know,
Gary

HT3964 a letter not recognized on pad

Similar Messages

Maybe you are looking for