HT3964 Charger stopped working tried everything any advice

     I just bought a macbook pro with retina design after a few days its was ok till today when the charger just stopped working ive done eerything but nothing worked help

http://support.apple.com/kb/TS1713
http://support.apple.com/kb/HT3964
You have a 1 year warranty, take it back for one that works.
a 14 day return it or trade in the whloe shooting match if there is a problem.

Similar Messages

  • My Mini-DVI to HDMI to TV connection stopped working - tried everything

    I have been using a generic mini-dvi to hdmi dongle plus a HDMI cable to connect my white intel imac to my television. It has worked great and flawlessly until very recently. Now the TV says "no signal". Screen still flashes blue when dongle is plugged in/out. Flashes blue when TV turned on/off. Nothing was changed in my setup. I have tested the mini-dvi port with the Apple Mini-DVI to S-video/video dongle (worked), tried a new minidvi-hdmi dongle (fail), tested the HDMI cable (good), and tested other ports on the TV, as well as resetting the TV to defaults. Still not working.
    At this point, I was assuming it was a software problem, even though starting from a restore disk or in safe mode did not solve this. Could this be a software issue? Is my video card only doing analog signals? My TV is less than 6 months old, so I doubt its that. Any advice would be greatly appreciated. I usually can solve these things myself, but this time it's vexing me. Thanks.

    Hi kp
    Disconnect everything and reset the SMC > http://support.apple.com/kb/HT3964
    +1. Shut down the computer.+
    +2. Unplug the computer's power cord.+
    +3. Press and hold the power button for 5 seconds.+
    +4. Release the power button.+
    +5. Attach the computers power cable.+
    +6. Press the power button to turn on the computer.+
    and restart with a PRAM reset > http://support.apple.com/kb/HT1379
    +1. --Shut down the computer.-- +
    +2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.+
    +3. Turn on the computer.+
    +4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.+
    +5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.+
    +6. Release the keys.+
    Shutdown the iMac +(personally I do not like hot-pluging)+ and re-connect everything in the following order.
    Cable to TV > Adapter to Cable > Adapter into the iMac (last) > turn on TV > startup the iMac > Open the Display Preference and select your personal settings.
    Dennis

  • HT4997 I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

    I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

    I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

  • How do i start my amds? It says its stopped but when i press start it doesnt do anything and ive pressed start a million times. Sometimes it starts sometimes it doesnt. Ive tried everything. any ideas?

    It says its stopped but when i press start it doesnt do anything and ive pressed start a million times. Sometimes it starts sometimes it doesnt. Ive tried everything. any ideas?

    Perhaps try the following document. (It's a better bet with a 1067 error message when trying to start AMDS, but I think it's worth a check.)
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • My macbook camera has stopped working - tried on Skype, Facetime, and Photobooth. Any ideas how to fix this?

    My macbook (purchased in 2007) Mac OSX Lion 10.7.5 camera has stopped working - tried on Skype, Facetime, and Photobooth. Any ideas how to fix this?

    If restarting doesn't fix, use the relevant suggestions from Apple's How to Troubleshoot iSight.  If nothing else there works, the repair by an Apple-Authorized Service Provider suggested there and by spudnuty will get it sorted.
    (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
    Message was edited by: EZ Jim
    Mac OSX 10.10

  • My charger stopped working.

    My laptop's charger stopped charging periodically so I went to get it checked out.  They told me the Charger port was damaged and needed to be changed.  I accepted and they changed it and I finally took it home.  After a few days my original charger stopped working and I took my laptop back to the store where they had supposedly fixed it and told me that the charger was now the problem and should buy a new one.  I finally bought a new original one and now it has stopped working again.  What do I do? I don't know what the source of the problem is.  I also tried it in a new power source and the problem persisted.

    What model MBP do you have?
    An new Apple charger comes with a warranty.  If it has failed, you should receive a replacement.
    Have you tried a SMC reset?
    http://support.apple.com/kb/ht3964
    Ciao.

  • MacBook pro charger stopped working

    I have a lightly used n
    MacBook pro 13 inch that stopped charging today. The battery health yesterday was at 95%. The green light on the plug end of the charger is not on. Could ths 80 dollar charge already have quit working? 

    Thanks. I was afraid of that. I tried several plugs.  It seems like everything we own from apple starts breaking down just after AppleCare ends. Our apple store is really slow in northern virginia. Had an appointment this Afternoon on a iphone5 that won't charge anymore and it still took more than an hour. Get home only to find my Mac charger stopped working today one month after the warranty expired.

  • Wifi iPad 3 charger stopped working after updating to iOS 6, help!

    Wifi iPad 3 charger stopped working after updating to iOS 6.  The little iPhone charger charges it very very slowly, but the charger gets really hot after a while.  I restored it and everything works but the charger.  It's only a few months old, should I try a new iPad wall charger block?

    Hi,
    I did this after reading the forums and it made no difference. it has actually charged from 14% to 67% but thats taken over 12 hours.
    Will monitor it and if no joy will go to a apple store
    Thanks

  • ICloud for pc not working tried everything

    iCloud for pc not working tried everything ( uninstall - reinstall - delete files - old versions ) nothing helps it just downloads a couple of photos and off again my iPhone uploads perfectly as all the pics goes to the iPad seamlessly, Please Help i'm on windows 8.1 x64, Thanks

    I think that the card reader may in fact be defective, but it just doesn't make sense if I have already used it fine before. I've tried everything on this Apple support page, thank you though.
    Does anyone have any suggestions?

  • Charger stopped working with iPod

    This is not a question. This is an answer to why my iPod charger stopped working, and I hope I can help someone out there experiaincing this issue. Instead of going through all the hassle of changing cables, sources, and taking it in to the apple store, look in your iPod lightning connector slot and see if any lent from your pocket has accumulated over time. Once I cleared it out with a needle (this obviously could damage your lightning port, so be careful, and dont be stupid) it charged again without issue.

    I attempted that as my first, however there was so much lent smashed and settled in there that compressed air didnt work for me. That is a good first option though.

  • Charger stopped working and a notifaction keeps popping up sayin " this accersory may not be supported . "

    PLEASE HELP
    My charger stopped working . Its a dynex pink charger . Everytime my ipod gets close to fully charged a thing pops up saying " this accesory may not be supported. Ive tried everyting , hook it up t my laptop . Still doesnt work .

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable. I suspect a bad cable
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible

    Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????

    IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!

  • My iPhone 5 charger stopped working. It's under warranty and I want to send it back. How do I initiate that process? The website keeps sending me in circles.  I'm getting an error message when I put in my serial number.  Why is this so difficult?

    My iPhone 5 charger stopped working. It's under warranty and I want to send it back. How do I initiate that process? The website keeps sending me in circles.  I'm getting an error message when I put in my serial number.  Why is this so difficult?

    If posible you will find visiting a store by far the simplest way of getting a solution
    Which Country
    are you in ?
    Have you checked the lightning socket on iPhone doesn't have lint or fluff in it
    solves majority of such issues

  • Usb charger stop working for my iphone

    I have had my Iphone since july and my charger has been working just fine. Last week my charger stopped working and i get a code 43. I have uninstalled apple products and reinstalled and still the same issue. Someone please help.

    One of the drivers may be corrupted. Try unplugging all of your USB devices and restarting your computer.

  • The program stop working before start any thing and no massege is appears?

    the program stop working before start any thing and no massege is appears?

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Maybe you are looking for

  • WSDL Versions

    Hello, How can I put a version on a WSDL?  Next, how do I verify which version the sending system is using? For example: I create a PurchaseOrder_Out WSDL.  Then I add a new field to the WSDL that is optional.  If the sender does not use the optional

  • Virtual IP address in Failover Cluster Manager

    Dear All, I want assign virtual IP address to cluster server windows 2012 but this Ip address is not given to physically. i am creating host entry with ip address and hostname but i am not able to ping. is there any way to ping this ipaddress? i am o

  • Movement of material from one plant to other within the same country

    Hello, I would like to move material from one plant to other via tran MB1B. The system generates the following error while trying to save document : Account determination for entry BAS1 BSX 9000 ___ C100 not possible The system did not find an accoun

  • New iMac blocks sometimes, Dashboard doesn't show any deatils

    I am the proud owner of a new iMAC -- 17" 2GHz Intel Core 2 Duo. Looks great, works fine, but then I try transferring files and settings from my old iMAC -- a 1GHz PowerPC G4 with OS X 10.2.8 Suddenly weird things start to happen. For example: I clic

  • Tax Exemption for a Contract Account

    Dear Experts, A tax is raised during invoicing of electricity bill for all Contract Accounts. I have a requirement where I have to exempt tax for some Contract Accounts. The tax code has been defined in IMG in Financial Accounting. When inputting the