HT3964 Computer comes on but no picture
I have imac intel core2 duo 2007, it comes on and you can hear the fans run but the picture does not come on.
Startup in Safe Mode
A Safe Mode boot takes longer than a normal boot so be patient.
Once you are in Safe Mode, click the Apple menu icon top left in your screen.
From the drop down menu click Restart.
Similar Messages
-
When I connect ipod touch(4th gen.) to desk top computer,picture of an apple comes on but no picture of a connection.But computer makes a sound .Thank you.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The green light next to my camera lens comes on but the picture is black, how do I get it to come on?
• If you have not already done so, restart Mac and
try again. If the iSight still does not work, continue.
• If Apple's http://support.apple.com/kb/HT2090
suggestions do not help you, (are you certain that you
used the correct "reset" procedure?), yours is most likely a
hardware problem that will require a professional fix.
Unless you have a current backup, make one now.
Then use the final "Troubleshooting" suggestion:
"... contact Apple or an Apple-Authorized Service Provider for service."
• If you want to try one more thing on your own first,
use Disk Utility to repair permissions. Then
download and apply the latest Combo Update for
your OS. Currently, the latest SL Combo is here:
http://support.apple.com/kb/DL1399
• Repair permissions again immediately following the system restart
that completes the Combo update.
Properly applying the Combo version of updates can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of iSight.
Message was edited by: EZ Jim -
My computer comes on but with the loading bar under the apple logo. The bar only loads partially and then the computer shuts off. How do I get this fixed?
If you are still under warranty and/or have AppleCare, call them. Let them deal w/it.
OOW: Please advise of which model iMac you have?
http://support.apple.com/kb/HT1758 How to identify iMac models
OS X Mavericks (10.9)
If/when you get your problem resolved, you need to update your OS. -
We have an iMac OSX Lion. I received a CD with photos on it from a friend of mine. My friend scanned the photos to her computer and gave the disc to me. I can hear the disc spinning but the pictures aren't coming up to view. Before having the iMac I had a Dell computer. I was able to view the photos at that time. Is there something I can do so I can view them on my iMac? Thank you.
The information I see in disk utility is the following: MacIntosh HD superdrive. 1TBST31000528A S Media
-
HT3964 my imac's display wont come on the computer is runing but the display is blank
my imac 2011 imac display wont come on the computer is running but the sreen is blank
I would first try resetting the SMC:
Intel-based Macs: Resetting the System Management Controller (SMC)
Hope this helps -
Light is flashing continueously on the front of the apple tv. No picture and no sound. Does anyone know what is wrong? Everything is plug in correctly. When I disconnect everything and re plug it in the apple icon comes up, but then blank screen with no sound and no picture. Does anyone know what is wrong?
l have an apple tv 2 generation please help meWelcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
when i turn my iphone 4 on, it comes up with a picture of a cord connecting to an itunes icon. when i plug it into my pc, it says the settings on my iphone need to be restored. but i dont want to restore it as will lose everything on it. what shall i do?
You have no chose but to restore your phone. What do you mean "lose everything"? Is your data/iTunes content not on your computer?
-
my built-in isight camera will still not work on my macbook pro after completing smc reset. The green light comes on but no video.
Any Suggestions?Restart the computer.
-
I have just bought a new computer and i am transfering my music from my ipod onto my new computer, I have put the files from the music option from my ipod onto my computer. alot of the songs have come across, however there is alot of songs that havent. I have noticed that the m4a files come across but the mp3 does not. the new computer has windows 8 on it, which is very new to me. when i try and play the mp3 files, it will open them up in a different programme and will not open in itunes. does anyone know what i can do?!?!!?!?!
THANKSHave you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
BTW this is the iPod touch forum -
I have a macbook pro. It is three years old. It has been working perfectly fine. However, as of yesterday, whenever I push the "on" button, the computer does not turn on. The little light comes on indicating that the computer has started, but there is nothing on the computer screen, and it does not make the usually noise that it makes when it cycles on.
Any suggestions?Check the battery status to make sure it has a full charge (and that the charger is working). Then make sure the screen backlight is turned up.
If the backlight is up then, try forcing the machine to shutdown (hold the power button for 5 - 10 seconds). Then restart the computer(listen for the start up chime).
If the computer does start up and you still cannot see anything reset the PRAM by forcing the machine to shut down (hold power button as before), then press the power button and start holding the key combo
<Command>+<Option>+p+r
until you hear the start up chime two or three times, then release the keys and allow to boot -
I had bought a Mac PRE 13 in, in 7th Sep in the online Apple Store,
but it is 15th Sep today,how doesn't my computer come to me yet?
So,how can I check where the computer is at this moment?Call the online Apple Store. You should have received an email with a FedEx tracking # if you are in the US.
There is nothing anyone can do for you on a message board! We are all end users just like yourself. -
i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?
You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums. -
I am using Endorange as my main mail, but every time i wannt to send open pdf docement as e-mail my computer comes up with other mail softwere called mail, how do I chance that?
I am using Endorange as my main mail, but every time i wannt to send open pdf docement as e-mail my computer comes up with other mail softwere called mail, how do I chance that?
-
Please help! I am trying to get at my iPod (2nd_Generation) from a new computer. I have iTunes loaded but the Setup Assistant doesn't come up to allow me to access my iPod Shuffle. When using iPod in the 1st computer (which I no longer have), the iTunes Setup Assistant comes up but not on this 2nd setup on a new computer? The manual doesn't clarify how to do this. Thanks.
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Maybe you are looking for
-
Up until two months ago I was able to access this one web site (www.melaleuca.com). It is a site that I order from monthly. When I type the address in I get a screen saying "the connection was reset while the page was loading". I called their tech su
-
Error with Maintenance Optimizer in Solution Manager 4.0
Hi, I am configuring Solution Manager for download SP, I check marketplace and download the guide, when I try to download a SP following message show me: "Change requests cannot be displayed or created, because the RFC connection has errors, or is no
-
Hello all, when I started Raptor for the first time I was asked to enter the path to "java.exe". I entered "d:\raptor\raptor\jdk\jre\bin" to be sure to have the right one. Then Raptor started. When I try to create a new connection, a window named "Ne
-
Flex 4.1 SDK compilation error=3
I just downloaded SDK 4.1 and tried to compile my application but I'm getting the following error: C:\projects\MyProject\build.xml:119:Execute failed: java.io.IOException:CreateProcess: "C:\Program Files\Adobe\Adobe Flash Builder Plug-in Beta 2\sdks\
-
Mail updated broke Gmail message read update
I had this issue in ML where I would read an Email on a mobile device and Mail would not show it as read unless I quit Mail and restart it. Issued disappeared in initial release of Mavericks but has cropped up again with the version 1 update. Anybo