HT3964 J'ouvre mon MacBook Pro, j'atteins la page ou je dois inscrire mon mot de passe, par contre il ne passe rien,l'image s'éteint et reviens au mot de passe que je dois réinscrire
The password page is always coming back after entering my password
Hi
In CS 6 may be, but not in my CC... Even if I click on CYMK, the color
does not change and the equivalent is made in LAB by default (to see
small icon LAB on the "color" window next to the 1797U which stays by
default on LAB even if CMYK is marked) in " options of nuance ", the LAB
is by default.
Then, in " options of nuance ", if I make CMYK, here is the result
openly (frankly) nobody, no ?
I already had to try your system but it seems that CC does not want to
give me of good colors Pantone U in the screen.
Then, I know in the printing that my color will be printed well, no
worries but this display of screen is too bad it's a pity!
It is not a progress but that is the way it is it is CC !
Bye & thank's a lot for all
Le 24/02/2015 16:19, Ton Frederiks a écrit :
>
Problème d'affichage des couleurs PANTONE solid Uncoated >
Différence entre les versions CS et CC ?
created by Ton Frederiks
<https://forums.adobe.com/people/Ton+Frederiks> in /Illustrator/ -
View the full discussion
<https://forums.adobe.com/message/7225351#7225351>
Similar Messages
-
Bonjour, je suis en voyage en irlande et j'ai quelques soucis pour me connecter au wifi, tant avec mon iPhone qu'avec mon MacBook Pro. Après avoir introduit la cle wpe, il ne se passe plus rien. Si ce n'est un point d exclamation sur l indicateur reseau. Idem avec les reseau publics sans code d acces.
Si vous wives une brillante idee cela m aiderait
MerciMerci jmlevy de te pencher sur mon problème.
Voilà une photo de mon panneau page :
Puis une autre d'une page qui ne ressemble plus à rien après changement de pagination:
Voici une ancienne page 28 devenue page 29. Fantastique, non ?
On peut voir :
Que mes blocs sont décalés par rapport à la maquette
que le bloc noir de la page 28 déborde sur la page 29.
Que mon bloc de texte est perturbé par l'ajout sous-jacent d'une page de maquette
que ma pagination a conservé les attributs d'une page pair (numérotation à gauche) alors qu'elle est passée impaire.
J'aurai considéré comme normal que mon ancienne p.28 se soit déplacée en page impaire avec le bloc texte bien placé ET avec les attributs de page (liés au gabarit, tels que pagination, filets, bas de page roulants) modifiés automatiquement. Or il n'en est rien.
Tu me demandais des éclaircissements par rapport à "J'importe mes gabarits dans le document au fur et à mesure de la construction du livre et je libère les éléments de gabarit afin de pouvoir couler le texte et disposer l'icono. Lorsque c'est fait, je ne retourne pas dans le mode page d'InDesign. J'attaque la page suivante." Voici, plus en détails ce que je fais au moment où je monte une nouvelle page. Mes gabarits ont été préparé en amont.
J'ajoute une page au document (ex : une page de texte)
je lui confère le gabarit qui va avec (ex : C-présentation ch1, cf plus haut)
je libère les éléments de gabarits pour pouvoir couler le texte et disposer les images.
quand ma page est finie je recommence l'étape 1.
Est-ce que c'est à l'étape 3 que je me plante ?
Est-ce qu'il y aurait d'autres explications à ce malheureux schmilblick ?
Merci d'avance. -
on my macbook pro when opening a page on safaryi can not save it as a pdf only give me the option of saving it as a web page can any body help me on this I have tryed so many times without success?
Just select Print in Safari and then, in the bottom left-hand corner, select PDF and you can save it to whichever flavor pdf file you like.
Clinton -
I am trying to connect a Macbook Pro to a projector for a Powerpoint presentation. When I use a VGA cable, the color of the projected images are not good. When I use a USB cable, the projected image includes the presenter notes on my computer screen?
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
and select the Library that you moved. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Your first option didn't work because you imported one Library to another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
Your second option didn't work because you simply referenced her library on the old machine.
Regards
TD -
MacBook Pro Mid2014 15" reports a Samsung UE40HU6900 4K TV as 8K (7680x4320).
This results in an ugly, washed out image half the size it should be. If you turn off scaling everything is tiny as 8K are displayed on a 4K screen. To get the actual 4K resolution you have to turn on scaling. Still 8K is transferred to the device, but doubling the data lines makes the picture look washed out and create obscure effects for line borders.
Did anybody encounter this problem before? Is there a fix for this? (OSX 10.10.1)You have the MacBookPro6,2, the Edsel of Macs. It may be covered by this program:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Make a "Genius" appointment at an Apple Store to have the machine tested.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed. -
My MacBook Pro gets really hot when I open a video file of any kind and the video starts lagging and the image fades away, also with anything that starts the fan. Is extremely hot on the left upper corner. Is there something I can do about it?
You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
Macbook pro stay on loading page
Hi,
I have a big problem my laptop : macbook pro stay on loading page
Somebody can help me????
please !!!!!
ThanksSee this Apple note on steps to resolve that.
-
I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?
Reinstall OS X.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
OR
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
HT3964 After reseting the MacBook Pro : NEED HELP
After reseting the MacBook Pro what software must be installed back onto it
Click on About This Mac in the drop down menu under the Apple in the upper left hand corner of the screen
Then click More Information
Then click the Storage tab on the About This Mac pane
That will tell you the amount of free space
Allan -
HT3964 I have a macbook pro and it randomly will turn off
I have a macbook pro and it randomly will turn off. This happens when the computer is plugged in and when it is not. The condition of the battery says: good.
I borrowed someones charger and after 5 to 10 minutes of charging it turned on. The charger light came on amber and was amber during the entire charge and has been green since. Unlike my charger which would only come on green, or very very dim green no matter what since the batter has died completely. Do you think that this is definitely the problem or is there anything I should check while I have it on and running?
-
Why does the smiley images in iChat on my Macbook Pro come across as symbols to my iPad and iPhone recipients? example: <3 comes across instead of a "Heart" image
Those chat images only work with iOS based devices. If they're being sent to someone without an iOS device, it will go through as an ASCII character.
-
Cs4 on new macbook pro with intel processor: "pages" lost in the meny "window"?
So I can't find any way to get the palett "pages". Anyone have a solution?
Hi!
InDesign CS 4 v. 6.0.6
Macbook Pro , Lion 10.7.3
I've installed the program, and should start using it: then I found out that the palette for "pages" (sidor in swedish) is missing. It does'nt appear in the meny "window" and I can't use F12 to see it. It should be after "objektformat" and before "text..." /Thankful for help! /Karin -
Macbook pro wont load ebay pages
Hi,
I finally took the plunge and got rid of Windows and bought myself a macbook pro. Not had it long but its already driving me crazy. It will not load ebay pages!?!? Every other internet site loads great but when I come to load ebay, I can search but when I click to view items it wont load the page!?!? I've tried everything I can think of, unintstalling safari, using chrome, reseting safari, emptying the cache, turning router off/on and turning airport off/on. Its got so bad I'm back to using my windows laptop!!
Can anyone help before I throw it through the window lolHello Daggers75
Welcome to Apple Support Communities
Try this... go up on the menu bar to: *Safari > Preferences > Security* and see if *Accept cookies:* is set to Never, if so change it to *Only from sites I visit*.
Dennis -
Macbook Pro cant load web pages
I have a macbook pro that I purchased in 2010, it is the Mac OS X 10.6.8. Just recently Safari has been having issues with loading webpages. Some pages it loads fine and others it will not load at all or take forever to load. I have been on here looking for resolutions and have tried several things but nothing has worked. I believe it is an issue with my router as when I wire in straight to the modem it works fine. All my other devices work fine on the wifi, it is just my macbook pro that is having the issue. I think it has to do with the DNS but nothing i have tried on here has worked. Any suggestions?
P.S.- my router is a Cisco E2500Go into your ~library/preferences and move this file to the trash com.appl.Safri.plist then restart your MacBook then give it a try.
To get to your library folder you will need to be in the finder, then hold down your option key then click the go menu, you will see the library. -
MacBook Pro Stuck At Login Page
My MacBook Pro (Mid 2012, 13 Inch Model) is running Windows via Boot Camp. As I power on my computer, I hold down 'Option' key while pressing the power button. It brings up the 'Macintosh HD' and 'Windows' disk. After trying to launch Mac operating system, it shows up the Apple logo and a gear below it. The gear keeps spinning (loading) and the Mac operating system never shows up. I've been stuck with this page for almost 1 hour and the OS didn't launched. Please help!
PS : Windows can run successfullyThe only way to use Lion Recovery is with an internet connection.
Maybe you are looking for
-
How to convert xml file into internal table in ABAP Mapping.
Hi All, I am trying with ABAP mapping. I have one scenario in which I'm using below xml file as a sender from my FTP server. <?xml version="1.0" encoding="UTF-8" ?> - <ns0:MTO_ABAP_MAPPING xmlns:ns0="http://Capgemini/Mumbai/sarsingh"> <BookingCode>
-
Lightroom 5 won't read my Sony A7ii raw files
Just got my Sony A7ii, shot some files and tried to import into Lightroom but it doesn't recognize the files???? They open in PS ARC just fine.
-
I am not at all sure what happened but I cannot get the desktop with dock and menu options to fill the screen no matter what alterations i make on system preferences. I now have to move the cursor up and to the left to gain access to the dock and
-
Error ORA-00932 updating data in worksheet
OK, some of this may be extraneous, but here goes: Using SQLDeveloper 1.5.1 Build MAIN-5440 I needed to insert a couple of columns into the middle of a table, so I renamed, created, and copied. Both fields are FKs, but are initially null. So, I go in
-
Print layout design - AR Invoice
How to retrieve & display Business partner TNGST & CST Numbers in AR invoice Design,I have no reference to BP code in AR Invoice? (Table name - CRD7 - Fiscal ID of BP Master data)