HT3964 Macbook Pro 8,1 turns on during SMC reset, does not reset

Hi, I'm troubleshooting a friend's Macbook Pro 8,1 - which has faced a number of low-level problems since she dumped juice on the keyboard a few months ago. The biggest problems appear to be SMC related (summarized below).
When trying to do an SMC reset (http://support.apple.com/kb/ht3964) by holding Shift + Option + Control + Power, and releasing all buttong simultaneously, the computer simply powers on. If I hold all buttons for ~5 seconds, the power LED flashes, then the computer powers on before the buttons are released. From other articles, this process should complete with the computer staying off for the duration - only turning on with a separate power button press afterwards, which makes me think the SMC has not been reset. Any thoughts on how to properly reset the SMC?
Background and list of problems persisting despite attempted SMC resets:
1. The battery stopped charging ~3 weeks ago. It ran fine until the battery died, then wouldn't turn on. We tried multiple chargers, to no avail. Miraculously, it turned on after being plugged in a few days ago, and has been operating mostly normally since.
2. Since it came back up, the computer does not sleep automatically when closing the lid, though it does manually sleep.
3. The battery power LEDs no longer light up when the side button is pressed.

Do you have the power adapter connected when trying to reset the SMC?  That is one of the requirements for resetting the SMC. 
If the issue still persists, you might want to take it into a genius bar: http://concierge.apple.com/reservation/us/en/techsupport/

Similar Messages

  • I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

    I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

    Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in.  That's about all  you can do.

  • My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

    My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
    After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
    There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
    even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
    Can you enlighten me what can I do I need to use my e-mail program urgently !!!
    Thanks for your help

    I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
    You might try defining a new SMTP server to see if that will work any better.
    By the way, the subject field for these messages isn't intended to hold a lot of text.  Put a short description of your problem in the subject field and save the rest of your message for the body field.

  • My Macbook pro is very slow in oening folders, it does not open immediatly as you would expect and takes about 30s or more. Please help!   Here is the spec: OS X 10.8.3 2,3 Gz Intel Core i7 8GB 1600 MHz DDR3

    My Macbook pro is very slow in oening folders, it does not open immediatly as you would expect and takes about 30s or more. Please help!
    Here is the spec:
    OS X 10.8.3
    2,3 Gz Intel Core i7
    8GB 1600 MHz DDR3

    Did u try to rebuild spotlight index? repair permissions? verify disk and repair if needed?
    if now, try it out.

  • My macbook pro retina 15'' cant boot after smc reset .

    My macbook pro retina 15" cant boot after smc reset. Can someone find me a solution which does not require opening my laptop ? Thnx in advance .

    Try Resetting the PRAM

  • HT3964 Macbook pro won't turn on and won't charge

    Hi. I just bought a macbook pro 13" last year August. Unfortunately just today when i used it and plugged my iPad to sync, it shuts down unexpectedly. Then i tried charging it as i thought it maybe because the battery is out but no. The charger won't work as well. I borrowed my cousin's charger yet it still dont work. My charger is working eventually to my cousins mac. Anyone who can help me? I tried SMC but it doesnt work. I need my MAC.

    You need to take your machine into your local Apple Store or an AASP and have them run diagnostics on it. Sounds as if you've a hardware failure.
    Sorry,
    Clinton

  • Trying to install Win 7 on MacBook Pro with OSx 10.9.3 and computer does not recognize install dvd

    I'm using a 2009 MacBook Pro running Mavericks 10.9.3 and I am trying to install Win 7 using BootCamp 5. I've been able to install BootCamp before using the original Win7 install dvd on this computer but ever since I updated it (not sure how many time, its been a year or so since I last used BootCamp) and started using BootCamp 5 its been giving me problems reading the DvD. I know my internal DvD reader works because I've imported music recently but whenever I get into the very first step of BootCamp 5 (Download Support and Install Windows option screen) I click next with only install windows option checked and it tells me to wait for the DvD to be recognized when its already in. However it does come up with the option later to open with/eject the "blank DvD" which is the Win install DvD. Any ideas on how to get around this issue?

    Robert.Delfs wrote:
    1.  Brand new MacBook Pro 2.5 GHz Intel Core i7 machine with two graphics chips (Intel HD Graphics 3000+ AMD Radeon HD 6770M), with   OS X 10.7.2 Lion (Build 11C74)  pre-installed. 
    2.  Attempting to download latest version of Photoshop CS5 fails.
         a.  Downloading CS5 from Adobe.com requires pre-installing Adobe Download Assistant. 
         b.  Adobe Download Assistant can be downloaded but cannot be installed because it requires pre-installing Adobe AIR. 
         c.  Adobe AIR can be downloaded but won't install.  Sometimes it issues error msg saying it requires most recent version of Adobe AIR, other times there is no screen activity after attempting to install from <AdobeAir.dmg>.
    2.  There is no option to turn off automatic graphics switching in Energy Saver System Preferences on this computer, so that suggested solution does not work.
    3.   Turning off (unchecking) "Automatically reduce brightness before display goes to sleep" has no effect — still unable to install AIR.
    This is a nightmare.  The reason I bought this computer rather than a less expensive model was to run Lightroom (which did install OK) and Photoshop CS5.  HELP!
    Robert
    My suggestion would be to reinstall Lion from zero. No update.
    I did that, and now I can install / uninstall Air without problems.
    The installation takes about 20 minutes...

  • 2011 Macbook Pro (non-retina) low FPS requires SMC reset every few hours

    Like the title says - I have to reset the SMC every fews hours because the FPS (frames per second) during games crashes down to an unplayable 20-30fps.  Once I reset the SMC it jumps back up to 120fps but it won't go back up, even if I stop playing, until I SMC reset.  Additioanlly, I don't even have to be playing games for the fps to die out.  I can reset and walk away, come back later, and the fps will be down again. 
    An update for the retina Macbook Pros has come out - can we have one for non-retinas?

    I'm having a similar issue. Not sure if this is related though. I used to plug in an external monitor and close the mac so I have only the external monitor. But then whenever I needed to unplug the monitor and open the mac, sometimes it wouldn't wake up, or other times the brightness of the screen is messed so the meter was showing the brightness at half but the screen was without brightness at all and by increasing it to the max, the screen would top until half its brightness.
    So I read and looked for, and some possible solutions were to reset the SCM, PRAM and reinstalling the system, I've done all, the last was reinstalling the OS and it seemed to work (actually I can't be fully sure because I stop using an external monitor, and have pluged in only a couple of times after the reinstall). However, today suddenly my mac froze and the console shows that error code "npvhash=4095". Also I've tried with the fonts validation and nothing...
    As I said, not sure if this is related but hope a little of more information helps.
    As a side note, while reading about the external monitor issue, it seems that thunderbolt port doesn't play nice with DVI.

  • Macbook Air won't turn on after SMC reset

    Hello,
    The fan on my macbook air had suddenly started becoming very loud intermittently even with no apps running. I tried restarting the computer several times, but the problem persisted for about a week. Looking online, I found an SMC reset might solve the problem. However, after doing the reset, my Macbook now will not turn on at all. There is no startup chime or lights when pressing the startup button. The only thing that happens when I press the power button is that the light on the adapter turns from orange to green for second before turning back to orange.
    I have an appointment with the Genius Bar tomorrow, but would like to seen if anyone has any suggestions. Thank You

    Try the SMC again:
    http://support.apple.com/kb/ht3964
    Then try a Safe Boot;
    http://support.apple.com/kb/ht1564
    Any change?
    Ciao.

  • I am trying to fresh install Mavericks (it gives me no other choice) on my erased MacBook Pro HD prior to selling on. It does not give me choice to use any other OS. Yet Mavericks is not available. ?? What to do please?

    I wish to sell my 2008 MacBook Pro. Have erased hard disk and when I went to fresh instal Mavericks OSX 10.6 (it gives me no other choice in the disk utility program) It says in the Apple Store, it is unavailable. But because this is done from disk utility there is no operating system or access to choose another OS eg Yosemite.  I cannot download anything using my iMac as that came ready loaded with Yosemite, so it does not show as a purchase. I do not want to use the Time Machine backup as that has all my details, apps etc. in it.    Would the best way be to purchase a disk containing Mavericks the OS that was on it most recently. Can anyone offer advice please? 

    You need to re-install the OS the computer shipped with using the disks that were supplied with the computer. Contact Apple Support and have the serial number of your computer available. They will send you new disks for a small fee.
    Selling old Mac
    Selling old Mac (2)
    Selling old Mac (3)
    Selling old Mac (4)          Apple support

  • Macbook Pro Randomly Shuts down...SMC Reset only temporarily

    I have a somewhat concerning problem with my 2011 Macbook Pro (15"). 
    It started two nights ago, didn't happen yesterday, and happened again today.  It has also fried two iPhone chargers.  Here's the story:
    On Sunday night, my Macbook randomly shut down.  Wouldn't restart, nor would it even charge (the LED on the charger didn't even come on).  So after trying everything I could (namely, PRAM, SMC, etc.), I finally took the bottom of the computer off, unplugged the battery internally, did a hard reset of the SMC, and everything was back up and running.  That night, I got a strange error when I plugged my iPhone in to charge:  USB is using too much power and has been disabled, or something along those lines.  Weird--but my computer didn't shut down again, so I shrugged it off.
    Fast forward to tonight--all worked fine until I plugged a NEW iphone charger into the computer.  This same cord worked fine this afternoon, but I got the "USB drawing too much power" message and then nothing.  The computer shut off, had to unscrew the bottom and do another hard reset, and here I am.
    I've tried to figure out just what might have caused this.  I did buy a charger from my university's bookstore that I do not think was Apple branded.  Is it possible that it somehow fried my battery? Or do I have a bigger issue - motherboard, RAM, etc.? The computer (when I get it to finally power back up) works fine and no files have been lost, so I don't think it's harddrive related. 
    If anyone can shed some light on this problem, please let me know.  I've searched for a long time to find a problem similar to mine and haven't found any answers other than the generic "Reset SMC," or "Reset PRAM."  I know how to and have done both of these things.  Do I need a new battery? I ordered a charger directly from Apple and have only used it since the first shut down.

    There's only a limited amount of things you can do on a laptop repair-wise: tiny and tightly packed components are a far cry from yesteryear's huge boxes with individual removables.
    Is the USB error coming in regardless of which USB slot you use? Have you reproduced this error with other USB devices that draw a charging current or significant power?
    If the problem is indeed that USB is drawing too much power, it could be a short in the USB circuitry, or it could be a short with your phone. Try charging someone else's iPhone. The concept with current is that it's "pushed by voltage" and "drawn by a resistance in a closed circuit." If the voltage is too high, or if the resistance is too low (short circuit), then you will end up where you're at.
    Also, it could be helpful to review your system log. In spotlight, write "terminal" then type in the shell prompt (without the quotes) "cp /var/log/system.log ~" this will put a file on your desktop that you can open with a text viewer, search for the word "USB" towards the end of the file, and see what you can make of it. Post anything here that seems suspicious. Warning: it'll be cryptic and hard to read!
    So,
    - Try different USB slots on your computer
    - Try different USB power-drawing devices
    - Try different iPhones or iPods
    - Review the system log and post any suspicious lines

  • What is the "best" internal hard drive compatible with macbook pro 13.3" product number: MD101LL/A  that does not damage OS?

    I'm looking for an upgrade in space ( 750gb - 1 TB) and performance on the hard drive, but I have read in many forums that many "compatible" hard drives may damage the OS. I plan on installing bootcampt with Windows 7 and the latest Mac OS. I'm wondering if anyone has updated their HD and if they've experienced any problems with it, or if anyone has any suggestions. Thank you for your advice in advance!

    rchu89 wrote:
    I'm wondering if anyone has had any particular experience with the Seagate 1TB solid state hybrid drive (found here: http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inch-ST1000LM014/dp/B00B99JUBQ). It boasts SSD-like speeds at a fraction of the cost, and its right around my budget, but perhaps its too good to be true?
    I have two of those Seagate SSHDs, using one as the internal drive in my primary MBP.  Boot and shutoff times are dramatically less than before (using 7200 rpm HGST HDDs).  In other respects, I have no complaints regarding the drive performance.  I can recommend them based on my limited experience (~3 months).  The $99 price does look very attractive.
    Note that when you install a HDD of larger capacity in a MBP, it should be reflected in your backup strategy.  Do you have a backup drive to accommodate the additional data that you will be able to store on the new internal HDD?
    Ciao.

  • Login problem in FaceTime in my MacBook Pro.... "The registering device does not have appropriate credentials."

    I am not able to loing FaceTime and have tried to get support from apple communities also, but none of those worked out.... Please help me to resolve "The registering device does not have appropriate credentials."

    Hello GAURAV,
    Thank you for providing the details of the issue you are experiencing with logging into FaceTime.  I recommend the following article:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I was resetting my macbook pro 17 (early 2009) to factory settings but does not restore due to a problem with the restore disk. Please advice me on what to do next.

    I was resetting my macbookpro 17 (early 2009) to factory settings but was indicating problems on the restore disk.  I erased my macintosh hd drive so the hd is empty.  What do I do next?

    Get an external drive and make a clone of your internal, erase the internal, set it for 1 partition (OSX Journaled) and restore the clone.

  • My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

    My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

    Mac OS X: Gray screen appears during startup 

Maybe you are looking for

  • Profit center report does not show selection criteria

    Hi, The SAP Business One software misses a functionality : When creating a financial report, you can enter surtain selection criteria in order to shift the data, and in order to get only the relevant data. This is possible in all reports. Also, in th

  • Best workflow for DSLRs and Speedgrade / Premiere?

    Can anyone suggest a workflow for DSLR footage using Premiere and Speedgrade? I would like to be able to roundtrip and do a light grade on clips and sequences before completed the offline edit. Is this possible? I know in the video tuts it seems to w

  • Alert Problem

    Hi experts, I am doing idoc to file scenario, its working fine. I have done alert configuration for this scenario. Alert is triggering only for mapping error. but in receiver determination i placed filter for particular field in idoc. For some field

  • Delete Parameter with Oracle Database Lite API Specification

    Hi, Is there any function or way to remove a parameter with a API function? Regards

  • Nike + iPod xml-Data

    I've a question: My Runs are saved on my "iPod nano" in the known XML-Format. This are my personal Run Files so I want to ask: Am I allowed to save the files external on my Computer and write a php or jscript for personal use which reads my Data so t