HT3964 macbook pro early 2008 does not respond to the power button

I bought a second hand mbp early 2009.
All seemed well when I tested it prior to buying.
But, now 2 days later, the mbp is completely dead.
In the past 2 days I had sudden power-downs (suddenly switching of completely).
First I thought it was the battery, which I overlooked when buying. But now I fear it is more serious!
It did work. And it worked like a charme. I even upgraded the os to mountain lion.
But now I cannot get it to work at all
Any help? Please...

Shootist007 wrote:
Right if the Nvidia chip fails completely it takes the complete computer down with it. No start no sign of life.
If after reading the Apple arcticle I link to and if you did a little research on the failures you may of figured that out for yourself.
Google Baking a Apple Mac Logic board or Fixing MBP 2008 Nvidia chip failures.
You wrote:
"I say did, because I already swapped it.".
What does that mean, you lost me.
As for your comment on how bright I may be, I'm bright enough to know not to buy a 3 or 4 year old Mac notebook.
Good Luck.
I swapped de mb for another one. the person that sold it to me took it back.
contrary to most people I do not sneer at other people. My remark at the end is pure an observation. What you make of it, is your doing, not mine.
I buy a second hand mb simply because I need a portable, but cannot affort a new one (for the moment).
there is nothing wrong with a 3 year old mb, apart from that it is 3 years old. of course there is a higher risk of failure. that is (partly) why the price is lower.
keep cheerful and travel light.

Similar Messages

  • Trackpad of MacBook Pro mid 2009 does not respond to the first click/tap

    Have the following problem and wasn't able to find any sollution here somewhere
    if I click on a link or choose a checkbox or do anything by clicking it does not work with the first click/tap and I have all settings right.
    a PRAM reset had no effect on that problem.
    so I still have to click/tap several times to access a menu, a safari-tab, or anything else…

    thank you.
    still I am not sure if it really solved my problem, but it looks very good.
    was a bit irritated in the beginning, because I got no feadback if I had done the SMC reset right.
    If the problem will be back too soon, I will continue this discussion.
    THX

  • HT3964 computer does not respond to the power button when pressed

    macbook power button inoperative, computer dead... power cord hooked up.. what next?

    Hello 007grams,
    Take a look at this article I found for you while researching your issue.
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367?viewlocale=en_US
    Resolution
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Cheers,
    Sterling

  • My 15" MacBook Pro (early 2008) will not empty the trash can.The operation can't be completed because an unexpected error occurred (error code -8003).

    My 15" MacBook Pro (early 2008) will not empty the trash can.The operation can’t be completed because an unexpected error occurred (error code -8003).

    Just the Option key. Third from the left on the bottom row.
    If that does not work, try the more elaborate steps described here:
    http://reviews.cnet.com/8301-13727_7-20020873-263.html

  • Macbook pro retina display does not respond. Any fixes?

    Macbook Pro Retina Display does not respond. Any fixes? I wonder if it overheated and shut down. Anyone else had a problem?

    Kitsi,
    try shutting the book for 1-min and reopen it.
    Also found the combinations buttons fn-control-F7 to unfreeze.
    good luck

  • Notebook GX740 does not react to the power button

    Hello. Notebook GX740. When you upgrade NB Camera / VGA / EC Firmware laptop hangs. 1 hour turned it off the power. Now does not react to the power button. How can I restore NB Camera / VGA / EC Firmware??? The file downloaded from the website EC1727EMS1.404

    You will need to perform EC reset after EC flash.
    Remove battery and disconnect AC adapter, and then reconnect them.
    Try power on the unit.

  • Macbook Pro Early (2008) will not turn on!

    I have same problem with my macbook pro early (2008)
    I think is unfair to have this problems in the "perfect world notebook"
    I hope you can help me on this
    Regars,
    Carlos.
    ---- MrAngel Discussion-----
    Ok. It looks like does not matter what model is but anyway here is my specs:
    Macbook Pro 15'
    Model: A1260,
    2.5 Ghz Core2Duo/2Gb/512 Mb Vram/250 GB 540RPM
    I would like you review the following posts:
    http://discussions.apple.com/thread.jspa?messageID=10071744&#10071744
    My macbook pro won't turn on. I press the power button and the little light on the bottom goes white only while I hold it down, the second i don't it goes off. When I do hold it down for a few seconds first it will be solid for like 3 seconds then start flickering
    http://discussions.apple.com/thread.jspa?messageID=10115278&#10115278
    When i tried to turn on my mbp today it only turned on for like a second and then shuts off. The light on the front turns on and the battery is fully charged, but it just turns off in a second
    http://discussions.apple.com/thread.jspa?messageID=10285598&#10285598
    Hi, I have an Early 2008 Macbook Pro and I used it this morning but two hours later, I found it off. When I push the power button, the white light briefly comes on but it doesn't sound like it's starting up. When I hold the power button down, the white light comes on solid for about 5 seconds, then flashes rapidly. During this time I can hear the DVD drive and other components kick on, but once the rapid flashing stops, all power is lost again
    The problem: Mac will not turn on.
    1. If I hit the power button it is trying to start working (white light is blinking, HDD rotating, CD noise and so on), but gets shutdown as soon as I release my finger from the power button.
    2. The maximum "Working" time is about 5 secs. During this time fans are working, white light is lighting, HDD working, CD does its usual noise. At the last two seconds white light starts flickering.
    3. If I remove all memory slots it is working as usual!!!, I mean working without pressing a powerbutton constantly... and asking for a memory of course.
    How it happened: well, it is usual thing then you are in hurry. Accidentally I hit restart. I didnt want mac to load again, so I did a force shutdown (5 secs an a power button). Thats it.
    What I tried to do: I did all those "shaman" hotkeys to restart SMC. I spent a day!!! by driving around my city and asking Apple providers to fix it with no luck.
    What I am planing to do:
    1. I have an Apple service center here in the Tallinn who are ready to do some diagnostics. The only thing is - I dont trust them my HDD. So I am gonna clone my hard drive data somethere before they get my mac in their hands.
    2. As soon as diagnistics is done I will get a price offer to fix it. It definitely wont be a cheap, since my mac is year and two months old (funny, two months and you are screwed).
    3. If it will be too expencive I gonna do DIY repair.
    What I would like to say to the Apple: please investigate that problem. The motherboard is definitely working. I can not fix it myself with no necessary equipments here, so I have to do expensive motherboard logic purchase.
    Aleks

    since my mac is year and two months old (funny, two months and you are screwed).
    Not if you had of purchased Apple Care.  You would have been covered for 3 years.
    What I would like to say to the Apple:
    This is not the place as Apple does not come to these forums. 
    These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily.  No one here works for Apple nor does Apple get involved in responding.  Not even sure if they "lurk."
    "Say" it here -
    Product Feedback

  • Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

    Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

    Fixing this is a two step process:
    1) System preferences > WiFi/Airport ...
    ... check [√] Ask to join new networks
    "Known networks will be joined automatically.
    If no known networks are available, you will
    be asked before joining a new network."
    2) Remove unwanted networks from the list of "known" networks under
    System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
    Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

  • HT3964 My Macbook Pro did not respond to the power button, and I ended up resetting the smc.  After that, it would start, but the keyboard  would not respond, pnly the trackpad.  On the screen there is a symbol with ahorizontal white bar and a row of empt

    After resetting the SMC the keyboard is inoperative.  On the start screen appears a traslucent square with a horizontal bar in white, and a row of empty dots below (the same format as for example the brightness symbol).  I cannot turn the Mac off with the power button, only with the trackpad, clicking on the turn off symbol on the screen. 
    When I try to login with my username, no characters appear as I type.
    I can login as a guest, but from there I can do nothing, because the keyboard is still inop and if I wanted to, for example, have the software updated, I need to type an admin login, which is impossible.
    Thanks for your help

    What happens if you close the lid? Sleep?
    In your place I would use sleep state to reset PRAM, as it can resolve your graphical mess.
    Your keyboard likely was not powered after SMC/PRAM failure, so you will need to open MBP cover without opening the lid and disconnect battery power cable with insulated tools from logic board, wait for 5-10 minutes, then try to reset PRAM while keeping cover

  • DPG4 does not post -- but the power button lights up

    I'm totally lost at this point... My old PowerMac no longer powers on. I managed to somehow get it to boot when I had this problem once before, but this time I'm getting nowhere. When I press the power button, the button itself still lights up -- but that's as far as it gets; as soon as I take my thumb off of the button, it goes dark, and the system doesn't even try to boot. The steps I've taken so far to troubleshoot this are: removed all third party components, (including a 512MB DIMM, a USB2 PCI card, and a 54g wireless PCI card, as well as several USB devices) removed the power cord and backup battery and pressed the PMU reset button. Does anyone have any other suggestions?
    Fortunately, this is no longer my primary system -- a white 24" Intel-based iMac takes that title now -- but it would be awfully nice to be able to install one of my Leopard licenses (from the family pack) on the old G4 to use it as my Time Machine server.

    Thanks for the suggestions so far.
    Additional information: I just successfully booted the machine, through a series of (what I would call) almost random configuration adjustments. Here's what I did... I opened the box, yanked the backup battery and pressed the reset button again, and tried to power it on. I then noticed that the optical drive was connected to the ata33 interface. Thinking that this is a bit odd, I swapped it to the ata66 interface. (My two internal harddrives are both connected to the separate ata100 interface... is this a truly bizarre set of interfaces, or is it just me?) I then pressed the power button -- and the machine fans started blowing, and then stopped. Suddenly very interested, I promptly disconnected the power cable from the optical drive, and then tried again -- no dice. I pressed the power button a few times just to see what would happen, and I observed the fans on the rear of the power supply and one case fan were spinning up for just a bare moment about every few times I pressed the button. I then disconnected the main power interface cable from the motherboard, and did the whole pmu reset/battery out/pmu reset/battery back in series, and then replaced the power interface and pressed the power button. Voila! It powered up, so I promptly logged into the site and started typing.
    Now, here's my thoughts: I would assume that the fact that it is presently booted up and running (albeit without the optical drive) rules out a failure of the front interface; do either of you concur? Also: I have not yet taken my multi-meter to the power supply, but my first instinct is to think that the power supply is just on the edge of my current wattage requirements, and disconnecting the power from the optical drive is what allowed me to boot. Correspondingly, I would speculate that this could be caused by either 1) my add-ons have exceeded the 400 watt output of the power supply, or 2) the power supply is indeed starting to fail.
    So... since the machine is running at the moment, are there any diagnostic programs I could run against the power supply to find out if it's operating at design specifications? I'd expect this would be more accurate and more safe then me poking around with a multi-meter -- and it would be less expensive then a trip to a Mac repair shop, though that is certainly the next step if the power supply is dying.
    Thanks again for your advice!

  • Macbook pro (early 2008): Trackpad not working under Windows XP

    My Trackpad worked regularly under Windows (Bootcamp) and Mac OSx until some months ago my Motherboard had to be exchanged because of a fault function of the graphics card. When I started Macintosh after the Macbook pro was repaired the Trackpad worked regularly, but under windows the mouse didn't react to moving the finger or clicking. I reinstalled the drivers, but this didn't fix the problem.
    What shall i do now? Thank you for any advices.

    since my mac is year and two months old (funny, two months and you are screwed).
    Not if you had of purchased Apple Care.  You would have been covered for 3 years.
    What I would like to say to the Apple:
    This is not the place as Apple does not come to these forums. 
    These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily.  No one here works for Apple nor does Apple get involved in responding.  Not even sure if they "lurk."
    "Say" it here -
    Product Feedback

  • My macbook pro froze last night and I held the power button down to restart the computer. Now the computer will not even start up. Any ideas what may have happened?

    While searching the internet last night my Macbook pro froze up and would not respond to anything. I restarted the computer and now the computer will not ecen start up. It will go to the gray screen with the apple sign. It is there working for 10 seconds and finally shuts down again. Any ideas how to get the computer to come back to life?

    Go step by step and test.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836

  • My macbook pro doesnt turn on when i push the power button

    I was working on my mac the other day and as usual shut it down when i was done. A couple hours later i wanted to turn it on again to check my emails and it didnt start up when i pushed the power buttin. i light on the lid lock bottun lights up but it does nothing else. Battery is fully charged so i don't understand why it refuses to turn on... HELP please?

    Portables that will not Power on.
    http://support.apple.com/kb/TS1365
    Go step by step.
    Note: Steps 5 and 6
    Step5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Reset SMC, hold the keys down for 20 seconds or more.
    Keep it charging for 2 hours or more.
    Best.

  • The keyboard in my MBA is not responding. The power button works fine and backlight is operating, but nothing else. I have tried SMC and Terminal but nothing helped. Would anyone have any idea what the problem might be? Thank you for your time.

    MBA keyboard not responding. SMC didn't work.

    If the USB keyboard still works after you log in, then the machine needs to be repaired.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Occasionally, macbook pro requires a manual restart by holding the power button

    Error log I receive upon restart is below:
    panic(cpu 0 caller 0x226ec0): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.15.3/osfmk/kern/sched_prim.c:1471
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x829d3e28 : 0x21b837 (0x5dd7fc 0x829d3e5c 0x223ce1 0x0)
    0x829d3e78 : 0x226ec0 (0x593ab8 0xffffffff 0x593a50 0x226790)
    0x829d3ef8 : 0x2275c6 (0xd47801c 0x0 0x0 0x0)
    0x829d3f68 : 0x219484 (0x2a1765 0x0 0x1 0x4f811e)
    0x829d3fa8 : 0x2aacb4 (0xffffffff 0x1 0x22f8f5 0xd14cb84)
    0x829d3fc8 : 0x2a1976 (0x0 0x0 0x2a17ab 0xd14cb84)
    BSD process name corresponding to current thread: configd
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacBookPro5,3 (Mac-F22587C8)
    System uptime in nanoseconds: 32898773843
    unloaded kexts:
    (none)
    loaded kexts:
    com.cisco.nke.ipsec    2.0.1 - last loaded 32741551646
    com.parallels.kext.prl_vnic    5.0 9376.599993
    com.parallels.kext.prl_netbridge      5.0 9376.599993
    com.parallels.kext.prl_usb_connect  5.0 9376.599993
    com.parallels.kext.prl_hid_hook       5.0 9376.599993
    com.parallels.kext.prl_hypervisor    5.0 9376.599993
    com.mcafee.kext.Virex          1.0.0d1
    com.apple.driver.AppleHWSensor   1.9.3d0
    com.apple.driver.InternalModemSupport  2.6.2
    com.apple.filesystems.autofs            2.1.0
    com.apple.driver.AppleTyMCEDriver         1.0.2d2
    com.apple.driver.AGPM        100.12.31
    com.apple.driver.AppleHDA 2.0.5f14
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.driver.AppleMikeyHIDDriver     1.2.0
    com.apple.driver.AudioAUUC           1.57
    com.apple.driver.AppleMikeyDriver           2.0.5f14
    com.apple.driver.SMCMotionSensor           3.0.1d2
    com.apple.Dont_Steal_Mac_OS_X      7.0.0
    com.apple.driver.AudioIPCDriver    1.1.6
    com.apple.kext.AppleSMCLMU        1.5.2d10
    com.apple.driver.AppleIntelYonahProfile  14
    com.apple.driver.AppleIntelPenrynProfile 17
    com.apple.driver.AppleIntelNehalemProfile          11
    com.apple.driver.AppleIntelMeromProfile 19
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.driver.AppleLPC  1.5.1
    com.apple.driver.AppleGraphicsControl     2.10.6
    com.apple.driver.AppleBacklight     170.0.46
    com.apple.GeForce    6.3.6
    com.apple.driver.AppleUSBTCButtons        201.6
    com.apple.driver.AppleUSBTCKeyEventDriver     201.6
    com.apple.driver.AppleUSBTCKeyboard    201.6
    com.apple.driver.AppleIRController            303.8
    com.apple.iokit.SCSITaskUserClient            2.6.8
    com.apple.driver.AppleUSBCardReader     2.6.1
    com.apple.BootCache            31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib  1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage           1.6.4
    com.apple.driver.AppleFWOHCI      4.7.3
    com.apple.driver.AirPortBrcm43xx 423.91.27
    com.apple.driver.AirPortBrcm43224          428.42.4
    com.apple.driver.AppleAHCIPort     2.1.7
    com.apple.nvenet      2.0.17
    com.apple.driver.AppleUSBHub      4.2.4
    com.apple.driver.AppleUSBEHCI     4.2.4
    com.apple.driver.AppleSmartBatteryManager      160.0.0
    com.apple.driver.AppleUSBOHCI     4.2.0
    com.apple.driver.AppleEFINVRAM  1.4.0
    com.apple.driver.AppleRTC  1.3.1
    com.apple.driver.AppleHPET           1.5
    com.apple.driver.AppleACPIButtons           1.3.6
    com.apple.driver.AppleSMBIOS       1.7
    com.apple.driver.AppleACPIEC        1.3.6
    com.apple.driver.AppleAPIC            1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine        0
    com.apple.nke.applicationfirewall   2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement        142.6.0
    com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
    com.apple.driver.DspFuncLib          2.0.5f14
    com.apple.driver.AppleProfileReadCounterAction            17
    com.apple.driver.AppleProfileTimestampAction   10
    com.apple.driver.AppleProfileThreadInfoAction   14
    com.apple.driver.AppleProfileRegisterStateAction            10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction        20
    com.apple.nvidia.nv50hal    6.3.6
    com.apple.iokit.IOFireWireIP           2.0.3
    com.apple.iokit.IOSurface     74.2
    com.apple.iokit.IOBluetoothSerialManager            2.4.5f3
    com.apple.iokit.IOSerialFamily         10.0.3
    com.apple.iokit.IOAudioFamily         1.8.3fc2
    com.apple.kext.OSvKernDSPLib      1.3
    com.apple.driver.AppleHDAController        2.0.5f14
    com.apple.iokit.IOHDAFamily           2.0.5f14
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMC 3.1.0d5
    com.apple.driver.IOPlatformPluginFamily 4.7.0a1
    com.apple.driver.AppleSMBusPCI   1.0.10d0
    com.apple.driver.AppleBacklightExpert     1.0.1
    com.apple.NVDAResman      6.3.6
    com.apple.iokit.IONDRVSupport      2.2.1
    com.apple.iokit.IOGraphicsFamily    2.2.1
    com.apple.driver.AppleUSBMultitouch       207.7
    com.apple.driver.BroadcomUSBBluetoothHCIController  2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController         2.4.5f3
    com.apple.iokit.IOBluetoothFamily  2.4.5f3
    com.apple.iokit.IOUSBHIDDriver     4.2.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice        2.6.8
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily 1.6.1
    com.apple.iokit.IOSCSIBlockCommandsDevice       2.6.8
    com.apple.iokit.IOUSBMassStorageClass     2.6.7
    com.apple.driver.AppleUSBMergeNub       4.2.4
    com.apple.driver.AppleUSBComposite        3.9.0
    com.apple.driver.XsanFilter 402.1
    com.apple.driver.AppleFileSystemDriver   2.0
    com.apple.iokit.IOAHCISerialATAPI 1.2.6
    com.apple.iokit.IOSCSIArchitectureModelFamily   2.6.8
    com.apple.iokit.IOFireWireFamily    4.2.6
    com.apple.iokit.IO80211Family       320.1
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.iokit.IONetworkingFamily           1.10
    com.apple.iokit.IOUSBUserClient     4.2.4
    com.apple.iokit.IOUSBFamily            4.2.4
    com.apple.driver.NVSMU      2.2.7
    com.apple.driver.AppleEFIRuntime            1.4.0
    com.apple.iokit.IOHIDFamily            1.6.6
    com.apple.iokit.IOSMBusFamily       1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet     6
    com.apple.driver.DiskImages           289
    com.apple.iokit.IOStorageFamily      1.6.3
    com.apple.driver.AppleACPIPlatform         1.3.6
    com.apple.iokit.IOPCIFamily 2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    Model: MacBookPro5,3, BootROM MBP53.00AC.B03, 2 processors, Intel Core 2 Duo, 2.8 GHz, 8 GB, SMC 1.48f2
    Graphics: NVIDIA GeForce 9600M GT, NVIDIA GeForce 9600M GT, PCIe, 512 MB
    Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9500420ASG, 465.76 GB
    Serial ATA Device: MATSHITADVD-R   UJ-868
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0x24400000 / 2
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0x26500000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8213, 0x06110000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0x04600000 / 3
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 2

    The panic may be caused by your outdated Parallels installation or by the notoriously buggy Cisco VPN client.

Maybe you are looking for

  • DW CS5 - CIB- Rendering not working

    Hi; I am working through the Adobe Systems "Classroom in a book" for Dreamweaver CS5. I have just gone through setting up an external CSS file for printing, so selected "Render Print Media Type" and made changes to "print_styles.css" which was create

  • Jar file upload and transport in Java webdynpro

    Hi, I wanted to change do small chnage to the existing jar file in webdynpro jave application. I did change the jar file. Question: Please let me know how can i include this jar file into existing application back and how the transport happend for th

  • Possible bug, at least serious problem, in the AS3.0 event architecture

    Event bubbling causes a compiler error when it should not. High up in the display list, a listener has been added for TypeBEvent which extends TypeAEvent. Lower in the display list, a different object dispatches a TypeAEvent, and sets bubbling to tru

  • IMovie won't display precision editor

    I had been using iMovie 10.0.04 and clicked on a command that caused the video downloaded files to go to the bottom half of the screen and the viewer to go to the top. I tried to open the precision editor and the command is inactive (gray not bold bl

  • Iphone 4 does not accept passcode after loading iOS7

    Loaded the new software to my iPhone 4 last night and looked at the new layout. This morning, I tried logging on but the phone does not accept my passcode. How do I correct this?