HT3964 MBP SMC reset not working

The built in- camera on my MBP is not working. I've identified the problem and it lies in the SMC, following this guide: http://support.apple.com/kb/ht3964 told me to press the ctrl + option + shift + power button simultaniously as well as releasing them the same way. There is no way to remove the battery unless i intend to remove 10 screws, so I take it I am not supposed to solve the problem this way..? Anyway, when turning on the computer after following instructions it simply powers up as normal, I log in and the camera is still not found. Is there anyway I can solve this problem myself?

It wouldn't hurt to re-install OS-X. Maybe a PRAM reset would help, you could try that for good measure. http://support.apple.com/kb/ht1379 Upgrading to OS X Mountain Lion wouldn't exactly be directly related but it's not a bad idea either. It's only about $20 right now!

Similar Messages

HT3964 SMC Reset Not Working

Tried suggested steps for SMC reset and battery still not charging. Mac is not remembering preferred networks and won't access the internet. Any suggestions?

Reinstall Leopard.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Smc reset not working on macbook pro mid 2010

Hello all,
I have all the problems indicating i need to reset the smc: fans running at full speed, mac doesn't go to sleep when closing lid, battery not seen by computer. this all happend in the process of changing the hdd and reinstalling 10.8.3.
When i try to reset the smc, the led on the charger does not blink or anything, and none of the above problems are fixed, but the computer is extremely slow when started after this reset (mouse lacking etc.).
However if i hold down shift, ctrl and option and release them before the power button, and then release the power button after a few seconds, the computer run perfectly fast, but still none of the above problems are fixed.
Any ideas how i can do a succesfull smc reset?

I have an update: the Smc reset actually helps away all the things except, the battery still cant be seen. But suddenly after about a minute, the fans speed up and the computer becomes extremely slow again. Also i noticed that the sleep indicator blinks 5 times before startup. What does that mean?

SMC resets not helping MBP charge.

Macbook Pro is 2 years old, and it has recently started spontaneously shutting off, blowing fans, etc. The AC cord is as far as I can tell in good condition (original power supply). Pro tends to shut off the moment it fails to receive a charge. Alternately, it also shuts off when I try to change outlets and it receives power for a couple seconds and then it blacks out. Each time I re-boot it, the computer doesn't recognize the date or time (usually picks 31 December, 1999). I had at one point used a spare replacement charger, but after not using it for a couple months when I tried it out my MBP wouldn't recognize it so when I tested my original charger it was fine. MBP is current on all updates and I've tried doing SMC resets and it hasn't helped. What options do I have?

From what you've mentioned and described so far has me believing that you have a short in either your battery, battery cable/connection or your power port.
Since your RTC (real time clock) keeps resetting it's date and not keeping the date you input makes me come to the conclusion you have a short.
In a pc notebook, there is also a built in battery on the motherboard/logic board to keep memory of the time and configuration of the pc. Not a 100% sure if this is the same case on a MB since I've never taken one apart.
Best solution is to take it to the Apple Store and have your battery, battery connection and power port inspected. Bring your power adapter too just in case.

Screen is frozen on apple logo and standard reset not working

All of a sudden the apple logo appeared on the screen of my 6th generation ipod classic and the standard process to reset will not work although I've attempted it numerous times. I also noticed that my ipod is not being recognized by either My Computer in Windows 7 or ITunes. I need help desperately!

So you can't the iPod to boot past the Apple logo? What happens if you try to manually force it into Disk Mode? Does that work? If so, you can try connecting it to your PC and iTunes in that mode to see if that will iTunes or your PC recognize it long enough for you to perform a restore operation.
Putting iPod into Disk Mode
B-rock

My MBP display is not working. Need to move data to new MBP Retina.

Hello.
My 3 yr old MBP display failed (display just showing vertical and horizontal lines).
I bought a new MBP Retina today.
Genius Bar told me to simply attach FireWire, then press "T" on old MBP to boot in Target Mode.
Then, look for old MBP HD icon on new MBP Retina desktop.
I cannot find old MBP icon on desktop.
I cannot transfer data from old MBP to new MBP Retina.
Any help would be appreciated?
Ken

Genius bar told you right - you need to start your old MBP up into target mode (booting while hold down the T key) but you need to have the right FireWire cable hooked up to the machines before you boot either. What year is your old model? Does it hve FW400 or FW800?
Here are the instructions from Apple - http://support.apple.com/kb/HT1661. Take a look at it and see if it helps. Also make sure that you have the Finder set so that external and remote disks will show up on your Desktop. When the disk mounts you can either just copy over files or, if you want to transfer accounts and associated directories, use Migration Assistant in your Utilities folder to copy over the info.
Good luck - call back if it's not working.
Clinton

Af:query + reset not working

Hi,
I am using jdev 11g(Version 11.1.1.3.0) .
I created a view object for a table with query which has a where clause( the clause expects a date from the user).
then i dragged the All queriable attributes on the jspx page as query with table option.
it renders a search region with iinputext(case id) and input as date(calendar) and a table below it which is rendered as per the input.
Everything works normal, but when i click on the Reset button rendered in the search section, it does not clear the date field.
if i write soemthing in case id field, that is cleared on the reset but the value entered by clicking the calendar is not resetted.
Besides on reset, it does not clear the table as well. Well from what i have been reading i assume i will have to reset the table programmatically.
But i am not so sure how to approach this situation.
Will highly appreciate if i can get any suggestions or point me to appropriate links.
Thanks in advance
ash

Hi,
When i try to programmatically reset the table, it does reset it but the problem is after resetting if enter a search criteria and click on search again, nothing shows up.
If i do a search before clicking on reset, it works fine, but afer reset the search stops working??
Any idea why this could be happening?
Following is teh reset code which i am refereing
    if(QueryOperationEvent.Operation.RESET.equals(queryOperationEvent.getOperation())){
      AppModuleImpl am = this.getAm();
      ViewObject submittalVO = am.findViewObject("AcrSubmittallogView1");
       submittalVO.setNamedWhereClauseParam("bind_date", "");
       submittalVO.executeQuery();
       AdfFacesContext.getCurrentInstance().addPartialTarget(resId1);
    queryOperationEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
on the jspx page, have added the following code in af:query component
<af:query id="qryId1" headerText="Search" disclosed="true"
                              value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
                              model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
                              queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
                              *queryOperationListener="#{backingBeanScope.backing_SubmittalLog.resetListener}"*
                              binding="#{backingBeanScope.backing_SubmittalLog.q1}"
                              resultComponentId="::resId1"
                              saveQueryMode="hidden" />Thanks
ashvini

Reset NOT Working

For the past month my Time Machine hasn't been able to keep its network up for more than about 5 minutes. Sometimes when I do a hard reset (take out the power and ethernet internet feed cables then re-plug them after a couple minutes) it will come back and the network will work (though only for 5-10 minutes). Other times the reset does not work at all.
The obvious reasons for this being annoying are: I can't get on the web and I can't back up my computer.
Anyone have any thoughts?

You may do better in the Time Capsule or Airport forums, as many of us here (like me) aren't very familiar with them.
Those forums are hidden in the DIgital Life section, at: http://discussions.apple.com/category.jspa?categoryID=140

OBIEE 10g RPD Paswword Reset not working

I have gotten 2 10g RPDs, the password of which I do not know. I ma trying to change/ reset the password by making use of the technique wherein "AUTHENTICATION_TYPE = BYPASS_NQS;" is uncommented within the NQSConfig.ini file. It does not seem to be working. I have also changed the Default RPD name within the config file to the new RPD alongside ensuring there are no gaps/ spaces in the RPD name which are the common pitfalls.
The strange part is that it did work with another 10g RPD couple of weeks back but is not working with the two RPDs I got yesterday. I have just the client 10.1.3.4.2 installed so eliminates the possibility of the BI server being up and running.
Is there anything else that could be preventing/ hindering this?

Nope. Did not work. Message returned back is that the existing password does not match the RPD password.
I have pasted the NQSConfig.ini file from "OracleBI\server\Config" below, just in case I am overlooking something that you happen to spot that might be preventing the overwrite:
# NQSConfig.INI
# Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
# INI file parser rules are:
# If values are in literals, digits or _, they can be
# given as such. If values contain characters other than
# literals, digits or _, values must be given in quotes.
# Repository Section
# Repositories are defined as logical repository name - file name
# pairs. ODBC drivers use logical repository name defined in this
# section.
# All repositories must reside in OracleBI\server\Repository
# directory, where OracleBI is the directory in which the Oracle BI
# Server software is installed.
[ REPOSITORY ]
Star     =     tsbrit03_VisualBI.rpd, DEFAULT;
# Query Result Cache Section
[ CACHE ]
ENABLE     =     YES;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS     =     "C:\OracleBIData\cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
// Cluster-aware cache
// GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
// MAX_GLOBAL_CACHE_ENTRIES = 1000;
// CACHE_POLL_SECONDS = 300;
// CLUSTER_AWARE_CACHE_LOGGING = NO;
# General Section
# Contains general server default parameters, including localization
# and internationalization, temporary space and memory allocation,
# and other default parameters used to determine how data is returned
# from the server to a client.
[ GENERAL ]
// Localization/Internationalization parameters.
LOCALE     =     "English-usa";
SORT_ORDER_LOCALE     =     "English-usa";
SORT_TYPE = "binary";
// Case sensitivity should be set to match the remote
// target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
// SQLServer65 sorts nulls first, whereas Oracle sorts
// nulls last. This ini file property should conform to
// that of the remote target database, if there is a
// single remote database. Otherwise, choose the order
// that matches the predominant database (i.e. on the
// basis of data volume, frequency of access, sort
// performance, network bandwidth).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
// Temporary space, memory, and resource allocation
// parameters.
// You may use KB, MB for memory size.
WORK_DIRECTORY_PATHS     =     "C:\OracleBIData\tmp";
SORT_MEMORY_SIZE = 4 MB ;
SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
// Analytics Server will return all month and day names as three
// letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
// To use complete names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
// Aggregate Persistence defaults
// The prefix must be between 1 and 8 characters long
// and should not have any special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_" ;
# Security Section
# Legal value for DEFAULT_PRIVILEGES are:
# NONE READ
[ SECURITY ]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL     =     NO;
MINIMUM_PASSWORD_LENGTH     =     0;
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
#SSL=NO;
#SSL_CERTIFICATE_FILE="servercert.pem";
#SSL_PRIVATE_KEY_FILE="serverkey.pem";
#SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
#SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
#SSL_VERIFY_PEER=NO;
#SSL_CA_CERTIFICATE_DIR="CACertDIR";
#SSL_CA_CERTIFICATE_FILE="CACertFile";
#SSL_TRUSTED_PEER_DNS="";
#SSL_CERT_VERIFICATION_DEPTH=9;
#SSL_CIPHER_LIST="";
# There are 3 types of authentication. The default is NQS
# You can select only one of them
#----- 1 -----
#AUTHENTICATION_TYPE = NQS; // optional and default
#----- 2 -----
#AUTHENTICATION_TYPE = DATABASE;
# [ DATABASE ]
# DATABASE = "some_data_base";
#----- 3 -----
AUTHENTICATION_TYPE = BYPASS_NQS;
# Server Section
[ SERVER ]
SERVER_NAME = Oracle_BI_Server ;
READ_ONLY_MODE = NO;     // default is "NO". That is, repositories can be edited online.
MAX_SESSION_LIMIT = 2000 ;
MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
CLIENT_MGMT_THREADS_MAX = 5; // default is 5
# The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
# a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
RPC_SERVICE_OR_PORT = 9703; // default is 9703
# If port is not specified with a host name or IP in the following option, the port
# number specified at RPC_SERVICE_OR_PORT will be considered.
# When port number is specified, it will override the one specified with
# RPC_SERVICE_OR_PORT.
SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
# or "IP1","IP2":port or
# "hostname":port,"IP":port2.
# Note: When this option is active,
# CLUSTER_PARTICIPANT should be set to NO.
ENABLE_DB_HINTS = YES; // default is yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
# SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
# for the cluster participant yet.
// Following required if CLUSTER_PARTICIPANT = YES
#REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
#REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
# EVALUATE_SUPPORT_LEVEL:
# 1: evaluate is supported for users with manageRepositories permssion
# 2: evaluate is supported for any user.
# other: evaluate is not supported if the value is anything else.
EVALUATE_SUPPORT_LEVEL = 0;
# Dynamic Library Section
# The dynamic libraries specified in this section
# are categorized by the CLI they support.
[ DB_DYNAMIC_LIBRARY ]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
OCI7 = nqsdbgatewayoci7;
OCI8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
ESSBASE = nqsdbgatewayessbasecapi;
# User Log Section
# The user log NQQuery.log is kept in the server\log directory. It logs
# activity about queries when enabled for a user. Entries can be
# viewed using a text editor or the nQLogViewer executable.
[ USER_LOG ]
USER_LOG_FILE_SIZE = 10 MB; // default size
CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = NO;
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "<Database>"."<Connection Pool>" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
# Query Optimization Flags
[ OPTIMIZATION_FLAGS ]
STRONG_DATETIME_TYPE_CHECKING = ON ;
# CubeViews Section
[ CUBE_VIEWS ]
DISTINCT_COUNT_SUPPORTED = NO ;
STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
USE_SCHEMA_NAME = YES ;
USE_SCHEMA_NAME_FROM_RPD = YES ;
DEFAULT_SCHEMA_NAME = "ORACLE";
CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
LOG_FAILURES = YES ;
LOG_SUCCESS = NO ;
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\CubeViews.Log";
# MDX Member Name Cache Section
# Cache subsystem for mapping between unique name and caption of
# members for all SAP/BW cubes in the repository.
[ MDX_MEMBER_CACHE ]
// The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
ENABLE = NO ;
// The path to the location where cache will be persisted, only applied to a single location,
// the number at the end indicates the capacity of the storage. When the feature is enabled,
// administrator needs to replace the "<full directory path>" with a valid path,
// e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
DATA_STORAGE_PATH     =     "C:\OracleBIData\cache" 500 MB;
// Maximum disk space allowed for each user;
MAX_SIZE_PER_USER = 100 MB ;
// Maximum number of members in a level will be able to be persisted to disk
MAX_MEMBER_PER_LEVEL = 1000 ;
// Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB ;
# Oracle Dimension Export Section
[ ORA_DIM_EXPORT ]
USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
DEFAULT_SCHEMA_NAME = "ORACLE";
ORA_DIM_SCHEMA_NAME = "ORACLE";
LOGGING = ON ; # OFF, DEBUG
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\OraDimExp.Log";

Mac acting as if the apple key is stuck down+ pram reset not working

My Mac pro has started acting as if the apple key is held down! Menus and cursers are all wrong or not working at all. Rebooting cures it for a few hours but sometimes only a few minutes, I've tried swapping keyboards ( twice ) and using diffrent usb sockets without any joy so I'm starting to think it's a system problem. One suggestion I read was to reset the pram but even that won't work. Holding down the command / option / P / R combo at start up doesn't do anything.
HELP! PLEASE

Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some Discs have it inexplicably on Disc #2. Some models have a separate AHT CD.
The Memory test can really only be trusted if it finds a problem, not if it doesn't find a problem.
Memtest OS X...
http://www.memtestosx.org/joomla/index.php
Rember is a freeware GUI for the memtest ...
http://tech.kateva.org/2005/10/rember-freeware-memory-test-utility.html
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/

TCP Reset not working

I have my man-port on vlan 2 this is our MGT vlan we do not use vlan 1, tcpreset is not work. Below is the step I did to set it up
1 vlan 1 is up but no ip address on this due to vlan 2 is MGT IP
2 I have the man-port on vlan 2
intrusion-detection module 9 management-port access-vlan 2
3 I ran the tcpdump and noting came back go a pars error.
can anyone shed light on my problems I'm not sure I have everything config right.
Thanks

Not sure what you are asking.
Sounds like you may be confusing the management port with TCP Reset event action for signatures.
The TCP Reset packets as event actions for signatures will not be sent out of the management port. They are sent out a TCP Reset port.
The TCP Reset port is not user configurable or even viewable in Native IOS.
The configuration you need to worry about is not the management-port but instead the data-ports of the IDSM-2. The data-ports need to be properly configured to monitor the traffic you want to execute the TCP Resets on,

PI7.1 HU6 password reset not working

Hi Guys
I received password reset emails few days back. I was able to reset and change password for all system except PI 7.1 HU6 system. I have tried multiple times receiving new reset password but for some reason, I am not able to login or reset my PI 7.1 HU6 password. The client is 800
Can you please let me know the solution if any you faced similar situation
Thanks

Hi Trevor
I have 'S' User id...I cant create a message as you said..Seems like i dont have enough authorizations...Every time i request password reset to PI 7.1, I get all systems reset and only PI does not work
can you let me know other possibilities
Thanks
Kishore

Hard Reset Not working on Palm Tungsten E

I have Palm Tungsten E. S.No. OOV3V5n4h511.
There is a problem with hotsync of Documents to go and error message is coming. I tried several times. When I tried hard reset it is not working and only soft reset is occuring.
Please assist to overcome and reset my palm computer.
Ramamurty
Post relates to: Tungsten E

Are you sure you are doing it correcly?
A hard reset is performed by holding down the power button while sticking something thin (paper clip) into the back reset hole of your device. Keep your hand on the power button while you release the paper clip from the reset hole. The screen will now say "Palm Powered." Take your hand off the power button. You will now see a screen in 5 languages prompting you to erase all data from the palm. The screen will say "erase all data? Yes - up, no - down" and you need to click on the up arrow (silver button on the 5 way navigator on the bottom of the palm). This will erase all the info from your device.

Alarm reset not working

My alarm reminders pop up fine, but the three buttons on the right do not work most of the time, i.e. close, reset timer and the examine doc in iCal buttons.
On occasion they will pop up or work straight away, but most of the time they are just inactive. Really frustrating when you are just looking to reset the alarm for another 15 mins!
The normal top left Red 'close window' button does work though.
Any thoughts?

Hold down the Command key when you click them and they will work every time. Cheers!

I have 3X YOGA 10 freeze - factory reset not working

I bought 3 lenovo yoga B8000-F 10 January 2014 none of them work. it is frozen on the logo LENOVO. recovery factory reset not possible

Lenovo Phone Support are suggesting I take it back to the shop where I bought it (was on vacation interstate in Australia - if Lenovo want to send me the flight, I'll definitely take it back )
This looks like a firmware bug and it seems to be endemic - interesting that it's just happened for me too, roughly 100 days since purchase...
Also found that the warranty was shown on the Lenovo system as being months before purchase - my receipt is 8/1/14, their record is 23/10/13
Can not get any message out of the tablet other than that it is in Meta Mode - it won't get to Factory reset.....

HT3964 MBP SMC reset not working

Similar Messages

Maybe you are looking for