HT3964 USB port not working even after resetting the SMC and PRAM, what can I do now?

Hi All,
I've got the "USB port draining too much energy" error message a couple of weeks ago and since then I've tried many times to reset the PRAM and SMC but still, one of my USB port is not working.
Could anyone please tell what I can do next ??
Thanks a lot

If you live near an apple store make an appointment. They will perform a DFU restore using known good equipment.
If that doesn't work you probably have liquid damage.

Similar Messages

My MacBook Pro will not charge, even after resetting the SMC.

My MBP will not charge. It's only a little less than 2 years old. I've reset the SMC and even an employee at the genius bar has, it still isn't charging. When I plug in the cord, my battery remains at 13% with a plug icon inside the battery. When I click on the battery, it says "Battery Not Charging" in gray.
This is my battery information:
Battery Information:
Model Information:
Serial Number:          9G1300072D3MA
Manufacturer:          DP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          2
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          685
Fully Charged:          No
Charging:          No
Full Charge Capacity (mAh):          5448
Health Information:
Cycle Count:          336
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          0
Voltage (mV):          11099
Please help!!

When I plug in the cord, my battery remains at 13% with a plug icon inside the battery.
Try Troubleshooting MagSafe adapters
And try a different electrical outlet.

In some pc ActionScript not working even after running the .SWF or .EXE, what may be the problem ?

In my flash project i am using ActionScript to get FULLScreen and mouse hide action. I hv already used the AS3 in Adobe Flash CC and AS2 in Adobe Flash CS6. All my files are working well, both .SWF and .EXE (projector..) . But the client is saying in his pc the Full SCREEN and Mouse hide is not working. I instructed to update the flash player plugins, still they are getting the same issue. What is the matter pls any one guide us. My code is in the first frame of Flash file which is mention below.
/*AS2 code*/
fscommand("fullscreen","true");
Mouse.hide();
/*AS3 code*/
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
stage.scaleMode = StageScaleMode.SHOW_ALL;
Mouse.hide();

Hi all, few days ago the client told , one of the project file (.SWF and .EXE) showing full screen. Again day before yesterday the client again said, all the project files working Full Screen and Mouse hide action. Still i do know such happens ? if any technical issue is behind its problem than anyone pls inform me. However it is running well in their PC now.

Ipod touch screen not working even after resetting to factory specs

ipod touch screen not working even after resetting to factory spec. lock symbol appears at top

That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

I had my ihone unlocked bt i forgot to sync it to itune before i went on Holiday. now its not working on any of the pc's here what can i do i stil have 3 wks to go!! plz help

i had my ihone unlocked bt i forgot to sync it to itune before i went on Holiday. now its not working on any of the pc's here what can i do i stil have 3 wks to go!! plz help

I think you will need to restore to the itunes computer you normally sync to.
So you'll have to wait until you come back from your trip.

What are the symptoms or indicators that determine the necessity of resetting the SMC and PRAM?

Hi,
Can anyone have list of symptoms that may help a user to determine if there is a need to reset the SMC and PRAM.
I would appreciate if the high-end user of this site come up with their experiences in making a compiled list, possibly product wise, if any such attempt is not taken yet.
In case it is done already, please provide me with the active link/s.
Please see below if you need to know about the MB i am using.
Model Name:            MacBook
Model Identifier:            MacBook2,1
Processor Name:            Intel Core 2 Duo
Processor Speed:            2 GHz
Number Of Processors:            1
Total Number Of Cores:            2
L2 Cache (per processor):            4 MB
Memory:            1 GB
Bus Speed:            667 MHz
Boot ROM Version:            MB21.00A5.B07
SMC Version:            1.13f3
System Software Overview:
System Version:            Mac OS X 10.4.11 (8S2167)
Kernel Version:            Darwin 8.11.1
Look forward to it. Thanks

Hi,
The system profiler shows as follows-
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Automatic Restart On Power Loss:          No
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Wake On LAN:          Yes
Display Sleep Uses Dim:          Yes
Battery Power:
System Sleep Timer (Minutes):          5
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          1
Wake On AC Change:          No
Wake On Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Battery Information:
Battery Installed:          Yes
First low level warning:          No
Full Charge Capacity (mAh):          2750
Remaining Capacity (mAh):          2701
Amperage (mA):          0
Voltage (mV):          12454
Cycle Count:          507
AC Charger Information:
Connected:          Yes
Charging:          No
Hardware Configuration:
UPS Installed:          No
Regarding the start up sound, i opened the L Bracket but Ram was seated properly. I just checked the ram's position but didn't remove it. However, i found the right most screw of the L-bracket was loosen, i don't know how.
Do you think i should remove the ram and reinsert it? If so, do i have to reset the PRAM after that?
The system profiler shows the ram is ok-
BANK 0/DIMM0:
Size:          512 MB
Type:          DDR2 SDRAM
Speed:          667 MHz
Status:          OK
BANK 1/DIMM1:
Size:          512 MB
Type:          DDR2 SDRAM
Speed:          667 MHz
Status:          OK
What do you think about the whole situation?
Look forward to your reply.
All the best and have a goo day Mate.

All iPad buttons are not working even after resetting it (hard, soft and via iTunes).

All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes.
The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."

I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

After upgrading to yosemite on my macbook pro the spinning wheel does not go away.i have reset the SMC and PRAM but the problem still persists

After upgrading to Yosemite on my macbook pro,the spinning wheel doesn't go away.I have reset the SMC and the PRAM but the problem still persists.Can anyone please help

Try starting in Safe Mode
OS X: What is Safe Boot, Safe Mode?
Try booting to Recovery and repairing the startup disk
OS X: About OS X Recovery - Apple Support
Reinstall Yosemite
OS X Yosemite: Reinstall OS X
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

My 3G sim is not working even after resetting and updating apn

I am disappointed with ios6 it has caused problems for my ipad connectivity .even after resetting apn ,network setting it is not connecting and showing 3G icon rather it shows E and speed is dead slow pls provide help at my email

The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1

Updated to ios6 lost wifi still not working even after resetting networks?

I've tried resetting the networks and changing the HTTP proxy to auto but no iphone users in my office have wifi connectivity after updating.

My suggestion is to see if Verizon will let you treat the modem as a simple modem and attach your own router to it.
I've found these Westells a pain to setup, and it took me once 2 hours to get through to a Mac specialist on Verizon's end to finally get the right setup on a customer's machine. I don't know that customer's number anymore unfortunately since this was a couple years ago.
Message was edited by: a brody

Wifi erratic on 4S after upgrading and not working even after resetting to factory setting. Why should apple isolate itself from their own product problems Matter of shame when they are not ready to communicate with the customer means they are dead.

11:22 (7 minutes ago)
to AppleSupport
Dear Sir/Madam Since the wifi is not coming ON how can I open this diagnostic on the iphone 4S am using and having problem with wifi behaving in erratic manner.
Am a professional engineer for projects and am 68 yrs old. At one time was looking after a production line manufacturing I C's in semiconductors manufacturing company of the US.
Have four apple products, one hp laptop and one DELL professional computer at home is used by only two members me and my wife.
Wife prefers working on ipad2 or ipad mini while traveling and has iphone 4. Am using iphone4S with laptop and Dell computer, No apple product is more than two years old.
Am having the problem in using wifi on the 4S after it was upgraded to the latest ios as per the recommendation by your software of my iphone 4S
The wifi card hangs up at it's own will and even a visit to your authorized service center in Delhi has not able to help me although they have reverted the ios back to the
one supplied with the set. Am a user and not a computer expert but it looks like the wifi card is not able to some times take the load while working which could indicate the wifi card is getting heated up.
My daughter who is Masters in 3D Animation is an ardent fan of apple products working at present in Canada was also gifted by me a 4S about 4 months back. My daughter-in-law is using iphone4 and an ipad for her professional works along with a Dell PC in the US. While my son is a fan of samsung products and does not like an apple product.
So in a family we have 7 apple products except MAC laptop/PC.
But the fact is, this problem with 4S has really shaken me up and now it seems your products are deteriorating in quality while demanding the best pricing structures.
Since this is purely the device and the software of apple problem you may please replace this set with new one as neither have any time to push you/ request you after your service centre
in Delhi told me yesterday this cannot be repaired.
The serial No of my set is DN*****TC0 and was bought from an authorized dealer and so were the other products from the same dealer in Delhi. This set is still in showroom condition and
was never used without a protective cover.
Thanks
Ashok Dhingra
D E E Hons B E Tech MBA
Vasant Kunj Delhi
<Personal Information Edited by Host>

11:22 (7 minutes ago)
to AppleSupport
Dear Sir/Madam Since the wifi is not coming ON how can I open this diagnostic on the iphone 4S am using and having problem with wifi behaving in erratic manner.
Am a professional engineer for projects and am 68 yrs old. At one time was looking after a production line manufacturing I C's in semiconductors manufacturing company of the US.
Have four apple products, one hp laptop and one DELL professional computer at home is used by only two members me and my wife.
Wife prefers working on ipad2 or ipad mini while traveling and has iphone 4. Am using iphone4S with laptop and Dell computer, No apple product is more than two years old.
Am having the problem in using wifi on the 4S after it was upgraded to the latest ios as per the recommendation by your software of my iphone 4S
The wifi card hangs up at it's own will and even a visit to your authorized service center in Delhi has not able to help me although they have reverted the ios back to the
one supplied with the set. Am a user and not a computer expert but it looks like the wifi card is not able to some times take the load while working which could indicate the wifi card is getting heated up.
My daughter who is Masters in 3D Animation is an ardent fan of apple products working at present in Canada was also gifted by me a 4S about 4 months back. My daughter-in-law is using iphone4 and an ipad for her professional works along with a Dell PC in the US. While my son is a fan of samsung products and does not like an apple product.
So in a family we have 7 apple products except MAC laptop/PC.
But the fact is, this problem with 4S has really shaken me up and now it seems your products are deteriorating in quality while demanding the best pricing structures.
Since this is purely the device and the software of apple problem you may please replace this set with new one as neither have any time to push you/ request you after your service centre
in Delhi told me yesterday this cannot be repaired.
The serial No of my set is DN*****TC0 and was bought from an authorized dealer and so were the other products from the same dealer in Delhi. This set is still in showroom condition and
was never used without a protective cover.
Thanks
Ashok Dhingra
D E E Hons B E Tech MBA
Vasant Kunj Delhi
<Personal Information Edited by Host>

My recovery key is not working even after reseting it. How can i solve it

I signed to my account but lost other device, so generate new key. This new generated key is still not working. Anny sugestion please?

Do you get an error when you try to set up Sync or is Sync just isn't working?
Try to remove the Weave folder in the Firefox profile folder and delete the prefs.js file to reset all prefs and maybe also delete the compatibility.ini file to reinitialize the profile.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Preferences_not_saved

Just bought iphone 5 white, 16gb. camera flash not working even after reseting. please do help

please help me out .. my camera flash was not working. jus bought iphone 5 in singapore and jus boarded ship. so i dont have mobile signal and call to apple customer care. so plz do help. i already reset to factory setting, but still same .

You did a reset? Or a restore?

Bluetooth not working even after reinstalling Bluetooth Stack and Monitor

I have a Satellite L70-A PSKNAU-06N06W which was U.S. custom ordered with bluetooh installed. It worked fine for 4 months then stopped. OS is Win7. After reading the boards I downloaded:
   Toshiba Bluetooth Stack for Windows, 9.00.03T
   tc00442200e.exe
   Bluetooth Monitor, 4.08
   tc00299500g.exe
It still doesn't work.Bluetooth Settings says "Bluetooth is not ready" and Bluetooth Assistant says "Autosearch has stopped because Bluetooth power is turned off."
In Device Manager under Bluetooth, Bluetooth V4.0 Module(WB335) and Bluetooth RFComm both have the yellow triangle flags.When I Update Driver Software-Browse my computer- Windows tells me the driver is up to date.When I ask the updater to search automatically it says either that or that the software is corrupted and to contact the manufacturer.
I would appreciate any advice to solve this problem, thanks
Solved!
Go to Solution.

In Device Manager, look under Network adapters.
If you cannot identify the Bluetooth there, then check the wireless. Assume it's the same.
-Jerry

I cloud backup not working even after reset my Apple ID and didn't try to back up photos

DId everything - reset my Apple ID, excluded photos from backup but backup could not be completed still

This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup. Then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

HT3964 USB port not working even after resetting the SMC and PRAM, what can I do now?

Similar Messages

Maybe you are looking for