HT3965 tried the steps to change the name on the device
I tried the step to change the name on my device by going to settings, general, about, and then tap on the name and it will not highlight.
That only works for iOS 5 and later. You have to connect the iPod to your computer and click on the iPod under Devices in iTunes and change the name like I said in my reply to your other post and by that method in the link you cited.
Similar Messages
-
HT201365 how do I change a name on a device?
how do I change a name of the device if giving it to my son for find my iphone app?
iPhone and iPod- How to rename your iPhone or iPod
-
Hello
Has anyone experience changing database name(including datafile locations),sid,data and control file location in operational dataguard setup
My understanding following below steps
1)shutdown primary and standby (stop managed recovery)
2)change db name in init.ora of primary and standby change database name control file location
3)create control file for primary from trace(script) make changes for db name and file locations
4)mount and open primary database
5)create standby control file
6) transfer standby control file to standby
7) mount stand by database and start manage recovery
let me know if these steps can change database name and file locations without any error
ThanksI would think the control file would have to know about the change.
I would consider the DBNEWID Utility to change the database name if I had to.
If you change the database name the DBID will change.
I'm thinking it would require a standby rebuild.
Here's some more info:
http://www.oracle-base.com/articles/9i/DBNEWID.php (Should work in 9 and above) -
What are the steps to change the name on the "House" in the side bar on OSX Mavericks?
What are the steps required to change the name on the "House" in the side bar for OSX Mavericks?
You want to change your username. First, make a backup of your files with Time Machine, as any error may damage your user.
Then, follow these steps to change your username > http://support.apple.com/kb/ht1428 Be very careful, as it requires to log in as root -
My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!
11lizzyp wrote:
can't be saved because the file is read-only.
I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
More on versions here:
http://support.apple.com/kb/ht4753
local snapshots:
http://support.apple.com/kb/HT4878
Sounds like a permissions problem ie read only.
If running repair permissions from your DiskUtility.app does not sort it,
Someone should jump in here with erudite and concise fix. -
And now its saying my ipod is corrupt. None of my stuff was erased from itunes it was only erased from my ipod so why am I not able to just sync everything back onto my ipod? why is it doing this now? I think this is ridiculous that just changing one name would do this much damage.
There is a backup plan after doing the Restore. Read this.
-
HT201269 how do you change the name of your device?
How do you change the name on your device?
Hi Sexxy21,
Thanks for visiting Apple Support Communities.
You can change the name of your iOS device using the steps in this article:
iTunes and iOS: Change the name of your iPhone, iPad, or iPod
http://support.apple.com/kb/ht3965
All the best,
Jeremy -
DLL Adapter: Change function name & params without unloading the DLL
Hi,
I'm using teststand adapters API to dynamically build a DLL call step. Each dll function is called thru this "DLL Manager" sub-sequence.
Tried 2 methods (here is an abstract of the code):
1. ActiveX steps:
CommonCModule.ModulePath = myDllpath
CommonCModule.FunctionName = myFunction (note: this call unload the previously loaded DLL)
Module -> LoadPrototype
for( to set params)
2. Statement steps:
RunState.Sequence.Main["Call DLL function"].TS.SData.Call.LibPath = myDllpath
RunState.Sequence.Main["Call DLL function"].TS.SData.Call.Func = myFunction (note: this one not, but the info seems to not be updated => The new function is not called properly)
Module -> LoadPrototype
for( to set params)
The two methods don't have exactly the same behavior, but work well for the 1st function that I call or work well if I unload the dll after step execute.
However, is there a way to use these steps (or others) to setup the step, but without unloading the DLL between each call. In my test sequence, I have to OpenConnection with the UUT before launching my commands, so the dll must not be unloaded to keep the connection opened...
e.g.
1) OpenConnection() => This function keeps the communication handle with the device
2) myCommand1()
3) myCommand2()
4) CloseConnection()
Thank you for help
C.
Solved!
Go to Solution.Hi all,
To recap:
I'm looking for a method to dynamically loads and executes C/C++ DLL functions without unloading the DLL between each call. I already have a DLL manager that dynamically loads and executes dll functions, but it unloads the DLL between each call even if I set the unload option to: "Unload when sequence file is unloaded"...
The problem is:
When I change the name of the function to execute (using the CommonCModule.FunctionName property), teststand automatically unloads the DLL before applying the change. Therefore, I can't open a connection handle with my UUT using one function and sends my commands with the others...
To help you with the understanding of my issue:
I created a simple example that will let you experiment the problem that I try to describ... You will notify that TestStand unloads the dll even if I don't request it...
1) download the attached zip file
2) extract it anywhere
3) open sequence file "dll_called_dynamically.seq"
4) read comment of the first step of the sequence
>> To analyse the case:
>> 1) Break and run the sequence using step-by-step (use F10)
>> 2) Run one iteration of the loop to execute the dll once, ,
>> 3) Execute launch_listdlls.bat and verify in the outputfile.txt that the dll has been loaded (search for testlib.txt)
>> 4) Then, step over the step "Set Dll Function Name to call"
>> 5) Execute launch_listdlls.bat and you will notify that the dll has been unloaded... ...
The testlib.dll file provided in the zip file is a basic dll that I used to confirm my test engine. Mainly, it only performs additions on the variables passed as argument to the dll.
The provided batch file executes the free application ListDlls.exe and create an outputfile.txt listing all currently loaded dll.
Please note that I use TestStand 2013
Thank you very much for your help,
C.
Attachments:
dll_unexpected_unload_ex.zip 313 KB -
forgot my adminpassword, i have tried the reboot with initial disk didn't work, i am able to get into my computer with name and password, but this same name and password doesn't work as an administrators password when i want to download or change things.
do you have any suggestions? Im about to give up, i can't even access wireless have to use a dsl
pretty sad... this same name and password doesn't work as an administrators password when i want to download or change things.
It's probably that your Keychain password is not the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered. -
Changing the name of Palm Device
Does anyone know how to write code to change the name of Palm devices? I am trying to write software that would need the name of the device to be changed temporarily so that it can be recognised by other devices using the new name.
Post relates to: Treo 680 (Unlocked GSM)Have you checked Palm's Developer Network?
Post relates to: Palm TX -
I was trying to do a fresh instal of Mountain Lion. By fresh I mean clean.
Firstly, my iMac disc drive isn't really working to well, so I have Mountain Lion on a usb.
I started up and held the option key.
Entered into disc utility mode, and started doing everything correct.
Then near at the end I when i'm required to select a start up disc it doesnt show anything... Help?
I checked around online and saw this tutorially and notice I had done something different.
http://macs.about.com/od/MountainLion/ss/How-To-Perform-A-Clean-Install-Of-Os-X- Mountain-Lion-On-A-Startup-Drive.htm
on page 2. where it says
When Disk Utility opens, select your Mac's startup volume from the list of devices. If you never changed its name, the startup volume will be listed as Macintosh HD. Be sure to select the volume name and not the device name, which will usually be the name of the physical drive, for instance, "500 GB WDC WD5."
I think I may have selected the device name. Is this the cause of my problem?
Can I fix this ? Please help?
I live in Auckland in New Zealand, I don't have any apple stores hereOk, I realized that won't work, I don't think, because you can't enable it on your Mac.
However, if you have another Mac, you can use Firewire Target Disk Mode to install. Boot your Mac while holding down the T key. You will see a FireWire symbol on the screen. Then, connect the two with a Firewire cable. Your Mac hard drive will show up on the other. Try to install onto that.
This may not work, depending on the other Mac. If it is similar to yours, it should.
I'm not sure if you can do it the other way. If you put the DVD into the other Mac and boot it into Target Disk Mode, then boot yours holding down the option key, you may be able to select the DVD on the other Mac as the startup.
This very old article seems to indicate it will work: http://lowendmac.com/misc/06/0914.html
Remote Disc Instructions:
Here is Apple's info: http://support.apple.com/kb/HT5287
Here is now to enable seeing the Remote Disc on your Mac: http://hints.macworld.com/article.php?story=2009012605560521 -
Can I Change My name in the Profile
Hi All,
Don't mine any one that I Asked this Q here
How To Change My Name in the SDN Profile ???
I Given My Pet name At the Time of Registration in SDN.
So I Want to Change My Display Name As Wel As The name in the Database
I Tried Like this
GotoMy Profile-Update Profile
Here I Changed First name Last name Display Name
I Logoff the User
Then Dispaly name Has been Changed But In My Postings my old name is Remains Same
I Want to See the Changes to Those Also
Please Let me Know
Regards
VamsiVamsi,
<b><i>Then Dispaly name Has been Changed But In My Postings my old name is Remains Same</i></b>
Where u are seeing ur old name in ur thread? Please make sure only the display will change not the contents which u wrote in ur questions/replies. Like Best regards Vamsi, this one u are referring to? If yes then it won't changes.
Best regards,
raj. -
Changing Users Name - different from the other post below
I want to change my home name under the places folder. It's not my account name that can be viewed in the preferences under account. When I got this new MacBook Pro and went thru the set up, somehow I must have agreed to use the name that is next to the house icon under places in the finder sidebar. I really don't know where they got it from and when I search the whole computer all that comes up is the user folder. I tried to rename the name but it won't let me. There has to be somewhere I can change that name short of clearing out the contents of the MacBook and loading a new system from the supplied start up disk.
Hi,
Just to amplify -
An account actually has two names, the "long name" (now called "Full Name" in System Preferences), and the ""short name" (normally a single word in lower case, called "Account Name" in System Preferences when you first set up an account).
When you set up a user account and enter your "Full Name," the system will suggest an Account Name (the "short name"), and you have *just this one chance* to change it:
Once set, the short name becomes the name of your home folder (the house icon in Finder) and is not easily changed. You can't just change the home folder name, because the short name is also an intrinsic part of your user account. However if you very much want to change the short name, there are a few ways to do this. Apple's method is here:
*Mac OS X: How to change user short name or home directory name*
http://support.apple.com/kb/HT1428?viewlocale=en_US
It's somewhat complicated as you will see, and changing the short name this way can sometimes introduce a few permissions glitches. You could still try it, or since your Mac is still new, you might instead consider wiping the HD and starting over. -
I have just changed my iPad mini password a day ago, and when trying to access it today it worked fine until about 4:30 (GMT) when I could not access the device using the correct password. I am absoloutley 100% sure it's correct.Additional details:I was last using Kik messenger before it stopped working.I was sitting less than two foot away from the PS3 my brother was playing.I'm 14 but I'm not some spoilt kid who gets iPhones and iPads from his parents to mess around with, I have got important coursework and homeworks on there.Any help would be great Thanks.
Hello ConfusedLlama
If the password is not working to get into your iPad mini, you would need to follow the steps to restore it. If you have a back up through iCloud or through iTunes, you can restore from that back up and it would not bring back the passcode unless it is encrypted.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
-Norm G. -
I receive the following error message when trying to publish site changes to iweb:
"Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
Can anyone assist?Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... and then republish.
Maybe you are looking for
-
Error while starting data loading on InfoPackage
Hi everybody, I'm new at SAP BW and I'm working in the "Step-By-Step: From Data Model to the BI Application in the web" document from SAP. I'm having a problem at the (Chapter 9 in the item c - Starting Data Load Immediately). If anyone can help me:
-
Error while querying ADF form by saved criteria - MDS activated project
Hi, I have a project with MDS activated through database. I'm able to save the customized query criteria and retrieve in the session the criteria is created. But if I log off the session and open another session, I only see the saved criteria name in
-
ITunes opens automatically when iPhone3G is docked, but I don't want it to.
I seem to be having the opposite problem that others have been posting about, which is that iTunes doesn't open when they connect their iPhones/iPods. In my case, it does, but I don't want it to. I've been keeping the iphone in the dock next to my co
-
Wifi gets disconnected after sometime while watching youtube on iPod Touch.
When I'm watching video on youtube, the wifi network suddenly gets disconnected after some time. Even when I goto settings->wifi, I'm unable to find the wifi network. However, at the same time I can find the wifi network and am able to browse interne
-
I accidentally deleted my mac app store how do I get it back
I deleted the mac app strone on my computer and I somehow can't get it back