HT3986 after updating iTunes my quicktime not working I am using Lion oprating system
Dear Support person
After up dating Itune now my Quicktime files not working, I getting massage that Quicktime on this computer not mached with Itune I have tryed all Quicktimes available on your sight with no succes.
I have Lion oprating system.
Yhis itune is realy ...... I hope apple will find a slution to get out of this bad software.
best regards
Lets see if I can make sense of that improper English.
iTunes and QuickTime run mostly independant from each other. Updating iTunes shouldn't impact QuickTime. If you are playing videos in iTunes they play in iTunes -- not QuickTime.
If you cannot use QuickTime, you need the most recent version of QuickTime X available from Apple. This is updated using Software Update on Lion. If your computer can update to Mountain Lion, that's your best bet to fix this issue.
It is also a possibility that you are just missing something.
Also, I'm not sure why this is listed under Boot Camp...
Similar Messages
-
Exception processing message 0xc0000013 after updating itunes and Quicktime
After updating itunes and Quicktime, every time I remove a CD from my DVD drives I get an error saying no disk exception processing message 0xc0000013 Parameters 0x759f023c 0x87f51934 0x759f023c 0x759f023c.
I tried doing a restore to a time before that update and that didn't seem to help. It just gave me different parameters.
I'm using Windows Vista and this is driving me nuts.
Any help would be greatly appreciated.I also have the same problems as you guys after installing Corel Painshop Pro X12. I went into the task list and stop the CorelIOMonitor process and then the problem went away. I found out that you can disable this from starting up using System Configuration tool via Start -> Run -> msconfig
. It's an interm solution untell they fix it. Maybe someone needs to notify Corel or Apple to fix this problem. -
I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
I have tried everything and nothing works.sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base] -
Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Updating iTunes - Keyboard does not work anymore...
I updated iTunes on both my computers today...
Now im experiencing problems on my computers:
- Keyboard on both computers does not work.
- I cant log off or shutdown computer on both computers(Have to force shutdown with powerbutton)
Now i have uninstalled iTunes and everything from Apple INC, still have the same problems...
Does anyone have a solutions to these problems....After waiting for computer to shutdown for 30 min, I then got a bluescreen:
Driver_power_state_failure
Looked it up and seems like the new iTunes update have messed up the USB drivers on my computers...
Ive tried to reinstall the USB driver, but it does not work(just hangs)
Apple you messed up my computers with your software...
So please give me a solution to this.
Thanks! -
TS3116 After updating, apple TV does not work. A picture is one TV screen which ask to use mini USB.
Hi... I am not sure what generation I have
After updating, I does not start at all, no light signal.
Just picture show to me to use mini USB for Song logo.
How can I do?Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
1. Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
2. Connect the micro USB cable to the Apple TV and to your computer.
3. Reconnect the power cable (only for Apple TV 3)
4. Open iTunes.
5. Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
After update insert trigger is not working correctly
Hello experts!
I created an after insert/update trigger and what strikes me is that it is not working as expected.
The trigger launches a procedure that does an insert in a second table if values in the triggered table ("my_table") are altered.
The problem is that the values in my second table, which are correlated to "my_table", are not changed with the correct values right away. The trigger and insert trails behind!
I have to update twice for the values to appear in my second table. Only then, the data of the first update will be inserted into the second table wheras the parent table ("my_table") will hold the latest values.
Do you have an idea what could be wrong?
create or replace
trigger myscheme.after_update_insert_set_tw
after update or insert
on myscheme.my_table
for each row
declare
begin
pr_my_table_tw_sync_sk(:new.lng_falle, :new.int_fallennummer, :new.lng_schaedling, :new.objectid);
end;Brgds,
SebOkay I'll give my best to explain what my procedure is supposed to do and what the table structure is like. I hope it'll help you to help me :-)
My parent table is called fangzahlen and is created as follows:
CREATE TABLE "BORKI"."FANGZAHLEN"
( "OBJECTID" NUMBER(10,0) NOT NULL ENABLE,
"LNG_FALLE" NUMBER(10,0) NOT NULL ENABLE,
"LNG_BEARBEITER" NUMBER(10,0),
"DATE_DATUM" DATE DEFAULT SYSDATE NOT NULL ENABLE,
"INT_FALLENNUMMER" NUMBER(4,0) NOT NULL ENABLE,
"LNG_SCHAEDLING" NUMBER(2,0) NOT NULL ENABLE,
"INT_VOLUMEN" NUMBER(10,0),
"INT_ANZAHL" NUMBER(10,0),
"INT_ANTEIL_JUNGKAEFER" NUMBER(3,0),
"BOOL_KOEDERWECHSEL" NUMBER(1,0),
CONSTRAINT "PK_FANGZAHLEN" PRIMARY KEY ("OBJECTID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
CONSTRAINT "CHECK_DATE_DATUM" CHECK ("DATE_DATUM" >= '1.apr.2006') ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;It holds values such as:
OBJECTID,"LNG_FALLE","LNG_BEARBEITER","DATE_DATUM","INT_FALLENNUMMER","LNG_SCHAEDLING","INT_VOLUMEN","INT_ANZAHL","INT_ANTEIL_JUNGKAEFER","BOOL_KOEDERWECHSEL"
97548,"39","1081","08.04.10","1","2","","220","","0"
97534,"39","1081","06.04.10","1","2","","100","","-1"My subtable is called tbl_test and created with:
CREATE TABLE "BORKI"."TBL_TEST"
( "OBJECTID" NUMBER(12,0) NOT NULL ENABLE,
"LNG_FALLE" NUMBER(10,0),
"DATE_DATUM" DATE,
"INT_FALLENNUMMER" NUMBER(4,0),
"LNG_SCHAEDLING" NUMBER(2,0),
"INT_VOLUMEN" NUMBER(10,0),
"INT_ANZAHL" NUMBER(10,0),
"LNG_FANGZAHLEN" NUMBER(12,0)
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;Okay, this were the prerequisites!
Let's concentrate on the trigger and procedure:
The purpose of the procedure is to insert data into tbl_test once a record in "fangzahlen" has been updated or inserted.
Tbl_test holds the mean average values (int_anzahl) for a number of collected items (lng_schaedling).
I need to insert date values for the combination of each lng_fangzahlen, lng_schaedling, lng_falle and int_fallennr into tbl_test.
If I had the following data in table fangzahlen:
97548,"39","1081","08.04.10","1","2","","220","","0"
97534,"39","1081","06.04.10","1","2","","100","","-1"the query in the insert section of my procedure returns the following data when run manually:
97534 31.03.10 16,667 (null) 1 39 2
97548 06.04.10 110 (null) 1 39 2Now, I need to generate the dates between the first and the second objectid (column 1 in the data above).
Hence,
97534 31.03.10 16,667 (null) 1 39 2
97534 01.04.10 16,667 (null) 1 39 2
97534 02.04.10 16,667 (null) 1 39 2
97534 03.04.10 16,667 (null) 1 39 2
97534 04.04.10 16,667 (null) 1 39 2
97534 05.04.10 16,667 (null) 1 39 2
97534 06.04.10 16,667 (null) 1 39 2
97548 07.04.10 110 (null) 1 39 2
97548 08.04.10 110 (null) 1 39 2
My problem is thatthe values above will only appear after I do another update to table fangzahlen or insert a new record into it. Theoretically the result above should be inserted right away?
Below is my procedure, which might give you a better idea of what I am trying to do! Please excuse this rather awkward explanation. If you need more info please don't hesitate to ask for it!
create or replace
Procedure "PR_FANGZAHLEN_TW_SYNC_SK"
Pr_falle Number,
Pr_fallennummer Number,
Pr_schaedling Number,
Pr_objectid Number)
Is
Y Number (10);
pragma autonomous_transaction;
Begin
-- first all records should be deleted from the subtable i.e. tbl_test
delete from borki.tbl_test where lng_falle = pr_falle
and int_fallennummer = pr_fallennummer
and lng_schaedling = pr_schaedling
and date_datum > '31.03.2010';
commit;
For Rec In
(select objectid lng_fangzahlen,
date_datum,
prev_date,
(date_datum - prev_date) difference_in_days,
round((
case
when nvl(int_volumen,0) > 0
and lng_schaedling = 1
then int_volumen * 40
when nvl(int_volumen,0) > 0
and lng_schaedling = 2
then int_volumen * 550
when nvl(int_anzahl,0) > 0
then int_anzahl
end ) / (date_datum - prev_date),3) counted_bugs,
int_fallennummer,
lng_falle,
lng_schaedling
from
(select objectid,
date_datum,
case
when lag(date_datum) over(order by date_datum) is null
then to_date('31.03.2010')
else lag(date_datum) over(order by date_datum)
end as prev_date,
int_volumen,
int_anzahl,
int_fallennummer,
lng_falle,
lng_schaedling
from borki.fangzahlen
where lng_falle = pr_falle
and int_fallennummer = pr_fallennummer
and lng_schaedling = pr_schaedling
and date_datum > '31.03.2010'
-- and objectid = pr_objectid
order by date_datum desc
order by date_datum asc
Loop
Y := 1;
While Y < rec.difference_in_days + 1
Loop
Insert
Into tbl_test
lng_fangzahlen,
date_datum,
int_anzahl,
int_volumen,
int_fallennummer,
lng_falle,
lng_schaedling
select objectid lng_fangzahlen,
prev_date +Y,
round((
case
when nvl(int_volumen,0) > 0
and lng_schaedling = 1
then int_volumen * 40
when nvl(int_volumen,0) > 0
and lng_schaedling = 2
then int_volumen * 550
when nvl(int_anzahl,0) > 0
then int_anzahl
end ) / (date_datum - prev_date),3) counted_bugs,
int_volumen,
int_fallennummer,
lng_falle,
lng_schaedling
from
(select objectid,
date_datum,
case
when lag(date_datum) over(order by date_datum) is null
then to_date('31.03.2010')
else lag(date_datum) over(order by date_datum)
end as prev_date,
int_volumen,
int_anzahl,
int_fallennummer,
lng_falle,
lng_schaedling
from borki.fangzahlen
where lng_falle = pr_falle
and int_fallennummer = pr_fallennummer
and lng_schaedling = pr_schaedling
and date_datum > '31.03.2010'
order by date_datum desc
order by date_datum asc
commit;
Y := Y + 1;
End Loop;
End Loop; -- end of cursor
Exception
When No_data_found Then
Null;
When Others Then
-- Consider logging the error and then re-raise
Raise;
End "PR_FANGZAHLEN_TW_SYNC_SK"; -
After update itunes freezes will not burn playlist to disc
After I updated to the latest itunes, I cannot burn a playlist to a cd: message is Disc drive or software not found then itunes freezes up so I have to force close and start over. Any one else have this problem? Any ideas on how to fix?
after update mine now freezes when i switch to miniplayer, download apps, halfway though a song. in short it's unusable.
hope i can find a way to do a roll-back. -
I want to Sync music from my PowerBook 4 to my Ipod generation 7 but it says I need to update Itunes to 10.7 but when it finishes updating and i go back to itunes nothing has changed and Itunes is not updated.
In order to install iTunes 10.7 or later you need OSX 10.6.8 or later. A PowerBook can install up to OSX 10.5.8
I hate to be the bearer of bad news but any new iPod won't sync with iTunes on Mac not using an Intel processor. -
After updating Mavericks camera functions not working. Help!
HI! i just installed OS X Mavericks and now my camera is not working, neither in Skype neither in photo booth and so on... what can i do? thank you
After tesing in a new account, if the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
iSight - Troubleshoot -
After upgrading itune, saffari is not working!
I upgraded my Itune, then my safari is not working properly! I can not search the web. or login to any site!
Since you are running OS X 10.10.2, you do not have an iMac (PPC) so you have posted in the wrong forum. I have requested the Hosts to move your post to the correct forum where hopefully someone will see it and help you.
-
After update menu button does not work
tried a restore that does not work.. tried the five r's nothing has helped
worked fine then updated now doesnt not work.. flicking hold from on to off now does what menu used to do and goes a page back..lol i update with the newest software for my mini then the software makes my menu key no function.. i GET ZERO HELP and they want me to pay 229 for repairs thats just to priceless
-
After updating im & mail is not working properly i...
Before few days i am accesing my emails and instant massages service but after updating my 2730classic my email and im service is disabled
in emails i got only ovi a/c n other a/c before updating there is all yahoo, gmail, msn etc a/c r available.
Same in my massaging only ovi massenger is showing now and before updating there is all windows live, yahoo massenger r available.
Any 1 plz help me out 4m this type of trouble.Hi,
Sorry to hear your issue.
Please remember always need to backup before updating.
You can use Nokia ovi service for this.
Can you give me so information to study this case:
1. I need to know which countryyou live
2. Which sw versions he has upgraded from and to
3. The product code of the phone (7 digit under the battery)
4. by which method has he upgraded the software? – FOTA, NSU, or at the Service Centre?
Br
Mahyav -
Quicktime not working properly in Mountain Lion
Hi, I have a Macbook Pro with plenty of RAM and processing. For some reason, Apple has decided we need two different Quicktime Players, but one of mine won't work. Any time I get a video for version 10.2 (dark blue and grey Quicktime), everything works great. However, when a video is required to be opened in version 7.6.6 (light blue Quicktime), it will play for about 3 seconds and then freeze eternally. I have tried reinstalling the program, but nothing changes. I cannot change the settings either because if I click on anything, it will instantly cause the freezing. Any ideas why this might be happening or how to fix it?
just opened my mac this morning and tried sending a couple of messages...... didn't work.... got the red circle exclamation mark..... first time this has happened... all accounts appear 'online'.... able to send messages through iPhone but not using Mountain Goat on my MacBook Pro build 2012...... these Mac machines are behaving more and more like Windows computers..... another half hour of my life looking for a solution to a software problem???
-
I took my iPhone to AT&T after I tried to update to iOS 6 and the phone said I needed to insert the original sim card which was what was in the device. AT&T said to take it to apple because it had to be a software issue. I get to the apple store and they tell me because I replaced my phone because of the defective shutter malfunction the "genius" entered in the wrong serial number by one digit causing the phone to turn into a UK phone and they could not fix it unless I have some sort of reciept or email saying it came from Apple. Mind you this is a year later with a move from TX to HI as well! So what am I able to do?? be out of a phone because they messed up?? They told me I could outright buy a new phone which I am NOT going to do because this phone worked before.
I cant find any reciept in my email or in my husbands email. I am going to attempt to call and speak to someone who can help me because this was not my fault except trying to be normal and update my phone!
Maybe you are looking for
-
Using a security group to add members to the collection question
Hi, I have a collection created in SCCM 2007 that is using a security group for membership. So I added a computer to the security group in AD but when I go to SCCM and click on the collection I dont see the computer in the collection. Should it show
-
What is the Windows 8/8.1 Feature in BIOS?
I have tried contacting MSI support and they keep dancing around the question. I'm certain that they don't even know the answer. They've linked me webpage to the new Windows 8.1 features as an answer. They've linked me a wikipedia page on UEFI. They'
-
I have over 1000 songs on an old computer and I want to copy them to a new one - I have a hard drive but it seems to only copy my purchased songs - any ideas?
-
If I purchase an iPhone 3g, can I then use it with the apple golf app without having cell or data service?
-
N80 - Can't detect Wireless LAN
Hi There, I got my new N80 today, and am eager to be able to use it via WLAN... However when I go to Connect. > Conn. mgr. > Availab. WLAN it just displays (no available WLAN networks) I have got an unsecured WLAN running at home, and a visible SSID