HT3986 blue screen of death when windows 7 is trying to complete install on iMac late 2006 running on Lion 10.7.5 with bootcamp 4.0.4...can someone pls help and thanks

trying to install windows 7 32bit ultimate on my late 2006 iMac with bootcamp 4.0.4 running on Lion 10.7.5, but it can't complete install, the BSoD appears as soon as it tries to reboot to continue setup, last stage reached " setup preparing computer for first time use and registry change" never seen reaching setup checking video performance then BSoD kicks in followod by black screen sayinng windows did not shut down properly, tried in safe mode, with advance mode, rebooted in install disk and ran repair, says cant fix it automatically, with messge 07: Failure during setup o.s. version 6.1.7600.2.0.0.256.1, tried to install nvidia geforce 7600 but mac says cant or not needed, been trying everything i can for 2 days no sleep...im slowly losing it
...any help will be appreciated and thanks

One person had iffy 3rd RAM.
You updated AMD graphic driver too to 11.8+ right? not just Apple's.
Plenty of free space for Windows to play with.
Do a chkdsk
Boot from Windows DVD and run memtest and also do system check
Restore points are better used, and image Windows
Rollback drivers works well, too
Some had trouble after NetFrame 4? update in Windows (but not on my 3 computers)
Apple drivers can be iffy and buggy
AppleHFS.sys has been known to be trouble. HFS allows for filenames that NTFS won't.
Paragon has HFS9.x driver that adds write support and does a better job
BC 4.x is still it seems trouble for more than a few (but obviouslly not in the 10s of thousands)

Similar Messages

Blue Screen of Death When Plugging in Ipod Touch 4g

Hello,
Im reciving blue screen of death when I plug in my ipod touch 4g. I have updated itunes, Drivers, This happens every time and I suspect it happens when my computer says found new hardware reconizing the ipod as a camera because once I pluged my ipod in and it didn't pop up found camera hardware and it worked. So does anyone know how to fix this or disable my comp from reconizing the ipod as a camera? Thanks in advance
p.s im using XP service pack 3

have u tried pluging an other usb (eg mp3 or mem stick) it to ur compuer? is it doing it with these?
if its only doing this with ur ipod try the following
1 go to start menu and in the search box type in usb
look for device manager
2. open the disk drives and plug in ipod touch and removeable disk should show up
3, try usb drives updates
because the ipod has a camera most older computers running xp think its a camera,
if u have and usb mem stick copy ur itunes folder on to it and copy it to a computer running vista or windows 7 and c it its doing it on one of them, if its doing it on one them there may be other hardware isues with ur ipod touch

Blue screen of death when syncing verizon I phone

I receive a blue screen of death when I try to sync my I phone 4 with I tunes on my laptop. The initial sync went fine, I am connected to my Exchange server for email and have downloaded CD's to I Tunes, when I try to sync...blue screen. I have run registry fix and virus programs and have no errors. Does anyone know how to fix this?

The first response was correct, the computer (xps 1210) used a logitech camera driver that I did not recognize so I deleted it. The software was still active and crashed the computer. Fix was reinstall logitech software and driver. Updating the driver would have probably worked. Thank you!

Blue screen of death when La Cie external firewire drive connected

I tested a LaCie external firewire drive on my iMac and it worked fine. I packed it up well and posted it to a friend who gets the blue screen of death when the LaCie is connected to her iMac. She's not even trying to boot from it.
My iMac is 9.1 and hers is 8.1. We are both running Snow Leopard. Was there some problem once upon a time with chipsets or am I mis-remembering?
TIA

Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. scree

Not sure that I have selected the correct forum. Hope my questions are clearly stated.
Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter. TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices). It does not show Mail or Safari menus. System preferences' display "gathered" the Samsung and chose its resolution. I did not find a way to select the Samsung as my display.
In addition to having old hardware, we have Verizon FIOS providing internet and TV access. Is there any way to make this work for us? We would like to stream video (Netflix) and view shows from the Web. Do we need Apple TV to do this? Or is it not possible with our old iMac? My husband thinks that our Airport could be a factor.
Thank you

Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
There are, actually, many alternatives to choose from than just from a Mac.
You need to have or invest in a WiFi capable router for all of these examples.
Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
If you have a older Mac, like I have noticed many users do, then you have other options.
If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time, you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

Hi! I have an iPhone 4s and when I FaceTime the sound is really low. When I phone call someone, its totally different and works better. I also have a MacBok Pro and the FaceTime sound works perfectly there as well. Can someone pls help me? Thanks :)

Hi! I have an iPhone 4s and when I FaceTime the sound is really low. It´s really annoying. When I do phone calls it works, and on my MacBook Pro it works much better on FaceTime than on my phone. Can someone pls help to so solute this? Really need help! Thanks

This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

HT1212 The problem is that my iphone isnt connected/synced to iTunes and i've forgotten my password so iTunes isnt connected either so can someone pls help me?

The problem is that my iphone isnt connected/synced to iTunes and i've forgotten my password so iTunes isnt connected either so can someone pls help me?
PLEASE HELP ME

Hi Someonewashere,
In the article you were coming from, there is actually a section regarding what to do if you have never synced to iTunes before:
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Regards,
- Brenden

Can someone pls help me with java on my macbook pro because after i download the mountain lion java has died and i need java to see streaming quotes from stock market

can someone pls help me with java on my macbook pro because after i download the mountain lion java has died and i need java to see streaming quotes from stock market

Java is no longer included in Mac OS X by default. If you want Java, you will have to install it.
However, note that you should think twice before installing Java for such a trivial need as looking at stock market quotes. There are other ways to get that information that don't involve Java, and using Java in your web browser is a HUGE security risk right now. Java has been vulnerable to attack almost constantly for the last year, and has become a very popular, frequently used method for getting malware installed via "drive-by downloads." You really, truly don't want to be using it. See:
Java is vulnerable… Again?!
http://java-0day.com

Does the Apple A1096 adaptor work with the A1081 monitor? Can any one help? Thanks, Paul

Does the Apple A1096 adaptor work with the A1081 monitor? Can any one help? Thanks, Paul

Click on this link for the fix http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/

When attempting to start iTunes, I get the following: "The iTunes library file cannot be saved. An unknown error occurred (-50)." Can someone please help me get this fixed?

When attempting to start iTunes, I get the following: "The iTunes library file cannot be saved. An unknown error occurred (-50)." Can someone please help me get this fixed?

Same problem here since latest update. As usual poor support from Apple with no answer or fix for this bug.

Blue screen of death when running labwindows, pxi chassis, and windows 2000

Hi, when programming under labwindows the software crashes cvi, and windows NT and i get the blue screen of death...usually every hr or so. I checked the hw config and there are no conflicts. Is it normal to share IRQ 9 for all? is there a document that explains the I/O map addresses for the pxi to check for conflicts? I got all NI instruments, but one irig board. Currently only talking to the DMM and the switch.

me also
-win2000
-cvi 6.0
-pxi1006 8176cpu
-dmm4060
-IVI1.83 ,nidaq693,nidmm201,nidmm21
- break program after a nidmmread function
- terminate program
- rerun program
- DMM Blue Screen of Death..everytime
- Make Software User Friendly -
Attachments:
BADDMM.ZIP ‏3 KB

Windows "Blue screen of Death" when booting computer attached to LabVIEW PXI realtime system

Good Morning (at least in the western hemisphere)!
I'm having a problem on two test systems where intermittently, at least on one machine, I get a Windows "Blue Screen of Death" error message when booting the machine connected to a PXI RT system. I reloaded the RT systems software yesterday (LV RT 7.1.1, NI-VISA 3.3.1) and am having this problem on two different setups, two laptops, two PXI chassis. Our short term work around has been to boot with the network cable removed at one end or the other, but these are the baseline models for a larger test system in the design/construction stage that will not be used by knowledgeable engineers but by (probably more knowledgeable!) technicians. Any ideas would be a help
Thanks again,
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Blue screens are almost always caused by drivers and not by applications, so chances are there's a problem on the driver level. The crash log file will be instrumental to diagnosing this problem.
Turn on the crash event logging as described in this Microsoft KB:
http://support.microsoft.com/kb/314084/EN-US/
...and then post the details from the crash found in the Windows Event Viewer here. That will help us narrow the problem down.
--Paul Mandeltort
Automotive and Industrial Communications Product Marketing

Blue Screen of Death When opening iTunes.

I am at a loss. For the past six months I have been trying to figure out why my computer has a blue screen of death and then restarts "nearly" everytime i open iTunes. The "nearly" is what's driving me nuts because every once in a while it will open ONCE and then start crashing again. I don't even do anything to help it open it just miraculously works every now and then. It even craches the comp when starting iTunes in safe mode. The blue screen error says "Page Fault in non-paged area". iTunes worked fine for months before this randomly started happening. I have tried every solution I have seen, even ones that weren't for my problem. So far I have:
Manually uninstalled iTunes and QT and reinstalled the standalone QT then iTunes.
Disabled itunes helper and ipod service before starting.
Disabling all other services and start-up items.
Installed current bios and drivers (as far as I can tell)
Installed current windows installer.
Updated microsoft products including .net
Updated Java runtime environment
Replaced ram
I have a pentium 4 1.6ghz with soyo mobo and a RAID card(mirrior) set-up. 1 gig of pc133 ram. I can ul the minidump if needed.
I figured out how to load my podcasts on my ipod manually but I want to get a video ipod so I need itunes. PLEASE HELP!!
Windows XP

there's a few more things worth checking on. but let's also capture a minidump of the crash and send it to someone who can interpret minidumps.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
send it to this email address
in the email, put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b

Blue screen of death when connecting ipod or running itunes

Please help me, I get the blue screen of death and its down to my itunes/ipod i think.
Uninstalled Itunes (tried doing this in safe mode but it wouldnt let me saying you cant do this) and re-installed it but when try to use it (ipod not connected) my screen either freezes a few moments later or the BSOD appears.
Ive ran a windows disk check and a system mechanic 7 one as well, a few folk on here have said my ipod might need reset but this is happening without the Ipod connected so is still an issue?
My ipod seems to be working fine, obviously i cant even access itunes to reset it or see its status.
Any help would be greatly appreciated.

Have you tried this?
http://support.apple.com/kb/TS2280
CG

X200 Tablet - Wacom Pen Blue Screen of Death on Windows 7

Hello...hopefully someone can help & point me in the right direction...I have a Lenovo x200 tablet PC (Stylus Only Version) - and recently installed Windows 7 Professional (64bit)
The OS install went perfectly...Once installed, I did all the Systems Updates for Windows 7, including all the updates for Lenovo using System Update 4.01.....However, I have an issue that I cannot seem to figure out...
PROBLEM # 1
The biggest issue I now face is, whenever I put the Digitized Pen next to the Tablet Screen within 2 seconds I get the 'Blue Screen of Death'....and it automatically Reboots....This ONLY happens when I touch the Pen to the screen....
I uninstalled the 'Wacom Drivers' - within the Device Manager, which i assume were installed by the system update(s)....After, uninstalling the issue of the 'Blue Screen' from happening when the pen touches the screen is gone.....However, I have no way of being able to use the Pen...it does not show any cursor or inking....Is there a specific DRIVER that I should be installing on my own to make this work properly - without getting the 'Blue Screen of Death' each time?....I really need some guidance on this issue.
PROBLEM # 2
My Second issue, which is suddenly occured after day 2 of installing updates is the Lenovo System Update 4.01 -- Suddenly, after working on day 1 - now, whenever i try to 'Check New Updates' i get a popup that says "An error was detected with the Package catalog for your system on the System Update Server. Please contact the Support Center".
I called techical support on the phone - and they made it seem like this was not their problem and they could not help me...The odd thing is, that this was working before, and now all of sudden it doesnt work...
If someone can please advise me on what to do, especially with the Pen Driver problem, I would greatly appreciate it....Thanks!
Solved!
Go to Solution.

**FIXED IT** TWICE!
I've been messing with this on multiple machines at my school.
I was getting the BSOD, "no tablet installed" all that good stuff.
I installed this, that and the other thing.
After testing another machine, I read something in the BSOD that caught my attention.
It mentions resetting the cache of the BIOS. I wasn't sure what that meant, or how to do it.
But I was able to get into the BIOS (F1 on the Lenovo splash screen) and I just tapped F9 (load default Bios options -paraphrasing) Then I hit ESC- it prompts to save the settings, agree and let the computer continue to boot.
I was able to test the Pen at the login screen. Just repeated this process on another X200 computer and it worked again.
Try it.
Good luck!

HT3986 blue screen of death when windows 7 is trying to complete install on iMac late 2006 running on Lion 10.7.5 with bootcamp 4.0.4...can someone pls help and thanks

Similar Messages

Maybe you are looking for