HT3986 How do i get wifi to work on windows 7?
Hello,
I installed Windows on my new MacBook Pro. The installation went perfect! The one problem I have is that when I am using windows, I cannot connect to WiFi. No routers even show up to connect to. It appears that Windows 7 doesn't recognize the wirelless hardwear within the Mac... Does anyone have any suggestions on what to do to fix this problem and be able to connect to WiFi?
Did you download and install the Windows support software? It is one of the first menu items in Boot Camp Assistant. If you did, then look in the Windows help menu and make sure you have wifi set up correctly.
Windows and wifi work without issue on your Macbook Pro. I think you either did not download and install the support software or you just have a wifi configuration issue.
Similar Messages
-
How can i get acrobat to work with windows vista
How can I get adobeexportpdf to work with windows vista?
But if, on the other hand you do mean Acrobat, please let us know what problem you are having.
-
How do I get wifi to work after updating to ios 8.2?
I have a iphone 5: A 1429.
wifi was working great with ios 8.1.3.
I updated to ios 8.2.... and it says wifi is connected, but internet doesn't work for more than 2 minutes. I can turn it on and off airplane, and I can have up to 2 more minutes of internet. I have 3 other devices on the network, and all of them work perfectly and have the internet, so the issue isn't the network.
How can I get the internet to work on my phone?Try going to Settings, General, Reset, Reset Network Settings. Once done, go back to wifi in settings and enter the router's password.
-
How can I get wifi to work at home?
How do I get iphone working with home wifi?
First, have you gone to Settings > WiFi > Choose a Network and chosen your network and then entered the acceess information?
You may need to power off and on the iPhone, then do a soft reset by holding both the power and Home buttons until the apple logo appears, ignore the red slider, and it restarts. Sometimes you also have to completely power down the router and power it back up, give it a few minutes to reestablish the base IP address, then power up the iPhone and choose the network, etc. -
How do I get PSE8 to work in Windows 7?
Here's my situation - can anyone help?
My PC came with Windows Vista 64-bit. I took advantage of a free upgrade to Windows 7 and installed same. I recently bought PSE8 and installed it - my PC has all the necessary system requirements noted on the box.
When launching PSE8, the welcome screen comes up. I can open and work in PSE Organizer, no problem. However, if I try launching the Editor from the welcome screen, I get the stripey dialog bar for about 10 seconds and then nothing. If I click the EDIT icon a second time, the whole thing just shuts down.
If I try to launch Editor via Organizer, either by right-clicking on the photo in question and choosing the 'launch Editor' option, or by selecting Full Edit via the drop-down menu next to FIX, I get a small dialog box saying 'launching PSE Editior' then nothing.
I've logged this with Adobe but their suggestions aren't an option - it recommended recreating the preferences file but the directory path they give doesn't exist on my PC so I cannot find this preferences file.
Who has any suggestions as to how I can get PSE8 Editor to launch? Has anyone else had this problem?
Cheers!An action that solved my problem running PSE8 with Windows 7 (although my issue was different from yours) was to change the compatibility setting. To do so, right click on the PSE desktop shortcut icon, scroll down and select Properties, then click on the Compatibility tab. Next, click on the box, Run this program in the compatibility mode for: to activate the choices. Finally, scroll down in the choices listed and select the mode for Windows Vista SP2. I've found that I can often solve issues by setting the application's compatibilty selection to either Vista, XP, or, in one case, Windows 2000, although my computer is running Windows 7.
Perhaps this action will help.
Ron -
How do I get mail to work through windows 7
I understand that outlook express will not work with windows 7 so how do I get mail and music on icloud
dougdab wrote:
I understand that outlook express will not work with windows 7 so how do I get mail and music on icloud
You need Outlook. 2007 or 2010. -
How can I get SQL Developer working on Windows 7 64-bit
Hi all,
I've followed the download instructions for SQL Developer v4 as per the download page (
http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/sqldev-download-v4-1925679.html
Install instructions: http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/sqldev-install-windows-1969674.html
I've installed SQL Developer requires JDK 7 (jdk-7u25-windows-x64.exe) - with no issues.
I've also downloaded and unziped to sqldeveloper-4.0.0.12.27-no-jre.zip to C:\Program Files\
SQL Developer successfully starts, but when I try to connect to a data source, I get the following error:
Status : Failure -Test failed: C:\Oracle11g\product\11.2.0\client_1\BIN\ocijdbc11.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform.
can any tell me how I fix this issue........... I getting fed up using clunky toadYou're trying to use a 32 bit Oracle Client with 64 bit SQL Developer.
You're doing something in SQL Developer that's requiring us to load OCI - in your connection properties, use Network Alias instead of Connect Identifier for TNS, or make sure in your Advanced settings you don't have 'Use OCI/Thick driver' enabled.
Or, install a 64 bit copy of the Oracle Client and tell SQL Developer to use that home instead. -
The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04
In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?
you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues. -
So my iTunes Radio is not working and whenever I press or choose a station, it goes into the song it was going to play and goes back out to the stations menu. I have great wifi, great cellular option or whatever it it, So how do I get it to work again?
Hi Jbierrie,
There is an issue with Photoshop specifically related to recent updates in which causes the licensing to revert to trial after a certain number of launches (typically 2-3).
The current workarounds are to either:
- Sign in with your Adobe ID again every few launches
- Uninstall Photoshop CS6 and then reinstall it but don't install any of the updates
The issue with the updates is planned to be fixed in the coming weeks. Sorry for the inconvenience.
-Dave -
can not get my wifi to work in any other location than my home. How dow I get it to work in other locations?
What happens at those other locations? Error messages?
Do other devices connect to those other locations?
What kind of networks are they? -
Any suggestions on how to get wifi to work? I have a multitech router and can connect with a computer wirelessly but not the ipad.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398 -
Does Apple make a printer for the iPad and if not how do I get it to work with a HP Officejet 6500A Plus printer? Thanks
Apple don't make any printers, but there are a number of the printers that are AirPrint-enabled, which you should be able to print to just by the printer and the iPad being on the same wifi network - the models that support AirPrint are listed on this page (the page also includes a bit of troubleshooting at the bottom of it) and it includes :
HP Officejet 6500A e-All-In-One E710a
HP Officejet 6500A Plus e-All-In-One E710n
If your's isn't one of those then you could see if HPs own ePrint app works with it, or there are third-party printer apps such as PrintCentral Pro and Print n Share which might work it -
My imessage wont activate and work, and i dont receive messages from people useing imessage? how do i get imessage to work?
I recently moved back to Australia for school from Canada and signed up for the new iphone 6 plus. After using icloud to save and backup from my previous iphone 4s, all of the apps eventually worked....except for whatsapp. After looking through my phone and numerous chat forums, it appears that my imessage and facetime are stuck in, "waiting for activation".....is anyone else having problems with this?
I am curious as I am unable to receive the whatsapp code to re-activate my application. This brings me to my second question, is this an iphone/apple problem or a whatsapp third party problem?
I've had friends send imessages to me and they appear to coming through. I have already rebooted and restarted my phone numerous time. A strong connection to wifi and data stream have all come in loud and clear.
I have tried all of the directions that were posted and still have no whatsapp and imessage still inconsistent.
Thank you -
Hi I have a Lexmark all in one printer how do I get it to work with my ipad mini
Hi I have a Lexmark all in one printer how do I get it to work with my mini ipad
It depends upon the model. It's wifi-enabled ? And is it listed on this page as supporting AirPrint : http://support.apple.com/kb/HT4356 ?
If not then do Lexmark have their own app in your country's store that supports that model ? If they don't then there are a number of third-party printer apps such as Print n Share and PrintCentral Pro which might work with it.
Maybe you are looking for
-
Opening CS4 projects in CS5 error with Canon 5D footage HELP!!!
HI Im trying out the new Premiere Pro CS5 demo and Im getting major problems opening projects. Initially I couldnt open any of my CS4 projects but could import single sequences one at a time only, not whole projects. So I was finally working fine yes
-
My account is blocked coz i forgot the answers of the security questions i tried everything but no luck
-
Printer sends extra blank pages
I have an HP all in one Photosmart C7280. Recently, the printer started sending a blank page after ever printed page. This happens whether I am sending a single page document or a multipage document. It happens whether I am printing from any of my
-
Routine rule type in transformations
Hello Experts, Can some one throw light on <b>Routine</b> as a rule type in transformations featured in BI 7.0. All mention some scenarios. Thanks in advance. Regards, KS
-
Sequence no in ageing report PLD
Hi, I have setup sequencel nos for A/R Invoices. In the ageing report for customers PLD I want to display the sequence no also. Can you guide me how to do that? Regards, Sek