HT3986 when installing win 7 pro on my macbook pro retina and win drivers that download from bootcamp the USB ports not works

please som eone help me to make the USB ports on my macbook pro retina works, as its stopped just when using win 7 pro after complete installing the win drivers

I catch the point;
I was opned device manager on windows then found devices unlnown ( USB3) as the boot camp downloaded from the internet not define this USB3 port, so, I installed it by searching online for this drivers.

Similar Messages

When installing Maverick on my 17" Macbook pro I got the message that my HD is damaged and can't be repaired. I now can't restart without simply repeating the attempt to install Maverick and thereby returning to the same message. How do I abort install

When installing Maverick on my 17" Macbook pro I got the message that my HD was damaged and couldn't be repaired. (not good news!!) I now can't restart without returning to the Maverick setup and therefore returning to the same message. How do I abort the Maverick installation so that I can try to return to the previous OS so that I can try to recover/repair the HD

I have the same problem with my 2008 MacBook. Repair disk from disk utility says it was successful but the installer thinks it's groundhog day after a reboot. I also tried fsck -fy after booting in to a command mode and it came back clean but again the installer gives the same error message. It seems like a bit is stuck somewhere indicating my HD is bad when it isn't.
I had the latest version of Mountain Lion and have applied every upgrade up to then without issue.
Anyone find a solution yet without having to erase the entire disk and staring over?
Attached is a screen shot of the error.

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers.

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

HT3986 when i use windows 7 with macbook pro ,the fan work hardly,how do i fix it?

when i use windows 7 with macbook pro ,the fan work hardly,how do i fix it?

Use InputRemapper
This is one or only utility I know, there are I am sure one or two others.
And the weakest link in running Windows on Mac: lack of thermal/SMC fan control to manage air flow and heat!

USB ports not working in Windows-7 on MacBook Pro Retina Late 2013 after Bootcamp installation

1) INSTALLATION
Using Bootcamp (v. 5.1.1, OS X Mavericks) in combination with an original Microsoft installation DVD disc using an external optical CD/DVD drive. Note, the installation is NOT from an ISO image. In the Bootcamp setup window only the lower two of the three setup options are clicked, namely a) to download Windows-7 drivers to a USB stick, and b) to partition the harddrive and then to install Windows.
2) PROBLEM
After the initial Windows-7 installation no devices attached to the USB ports can be found under Windows-7. The ports are dead. Also the WLAN did not work, so no internet connection was possible.
3) CAUSE
The problem is caused when you use a USB 3.0 stick as destination for the Bootcamp driver downloads. It seems that Windows-7 cannot recognize the USB 3.0 stick properly during the Bootcamp/Windows installation process, thus failing to do perform a proper installation of the Windows-7 drivers.
4) SOLUTION
Use a USB 2.0 stick and everything will work perfectly.
Follow these steps in order:
1) Connect your external DVD drive to a USB port and insert the Windows installation disc
2) Start the Bootcamp utility
3) In Bootcamp, remove the failed Windows-7 installation and partition
4) In Bootcamp, redo the entire Bootcamp process, but this time using a USB 2.0 stick
5) Follow all further steps in Bootcamp and later in the Windows-7 installation process
6) At the end of the installation procedures you will be asked to confirm the installation of all Bootcamp/Windows drivers.
7) Bootcamp installs all the drivers and your Windows-7 installation will work perfectly.

Ok, where is this Intel driver? There is no such thing "program manager" so I am guessing you mean the Programs and features control panel, but on my machine that whole window is blank after a clean install. I still cannot get the USB ports to activate. Two fresh installs and several different USB sticks later and no luck. Should I just give up and go to Windows 8.1? I really need Windows 7 to work if at all possible. Other devices shows one USB controller without driver software so I suppose that's the culprit. There are other USB devices installed under the USB section of Device Manager, but they apparently have nothing to do with the USB ports themselves, just devices like the trackpad etc. I've spent two hours on this so far and it's getting out of control. Why doesn't this work with generic USB drivers?

USB ports not working on MacBook pro

I Am trying to hook up a portable hard drive (2.0) via a USB port. I've now checked with other items as we'll and it appears that the connections through the USB ports are no longer working.
PLease help!

Jkp54,
have you run your MacBook Pro’s Apple Hardware Test, to see if it can detect anything amiss?

Installed Windows & 32 Bit But Drivers and USB ports NOT WORKING.

I bugh an HP Pavillion TS 14 Notebook that came preinstall with Windows 8.1 64 bit which I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem. None of my network drivers work and the 2 uSB ports where I plug my mouse and other SB hardware in no longer work.
I did a back up of the SW Set up file that has all of the HP dvers for my laptop but both the network and video divers won't install. And When I try to install the drives I get the eror message saying they are not compatible with this version of Windows.
I have loked on the HP website under my laptop model which s as above but HP don't do drivers for Windows 7 32 for my laptop. And I have looked on both the Realteck website for both the Realteck ethnet and Realteck wireless network drivers but none of them work or install on my operating system. The video drivers Intel don't work either. So I am really stuck a I cannot go back to Windows 8.1 as though that 32 bit Windows 7 would work on my laptop but most of my drivers are not compatible with the operating sytem And I don't want to install 64 bit Windows as I like 32 bit.
The drivers that are not working on Windows 7 32 bit are:
Realteck RTL8188EE 802-11b/gn witeless lan
Realteck ethnet die and
Intel High definition graphcs driver
Which don't work at all on Windows 7 32 bit as they are 64 bit only drivers.
So can you please post me a link bth the network and Intel graphics drvers that work with my laptop. As I have tried lots of different Realteck and raphics drivers for Window 7 but NONE of them work on my system. And None of my USB ports are working either. So how do I solve this problem?
This question was solved.
View Solution.

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Usb ports not working after mavericks install

After installing Mavericks on my mac pro the usb ports are not working for my printer or other usb drives. the only item i can get to be seen via usb is an apple optical mouse. any suggestions would be great.

Hi there grnded189,
You may find the troubleshooting steps in the article below helpful.
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
You may also want to reset the PRAM and SMC as well.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
-Griff W.

Mac pro usb ports not working

Hi I have a dual core intel mac with 3.0 ghz processors 8 gig of ram v1.1 all of the USB ports front & back have failled. The computer boots up into Snow Leopard, 10.6.8 The mouse, keyboard or any other devices using USB ports don't work, I checked with a multimeter on all the USB ports & there is no +5volts between pins 1 & 4 on any of the USB ports. I have check the keyboat & mouse on another mac & they work fine.
Doy you have any idea what I should do now,
Kindest Regards,
Anthony.

When wacky Hardware probelms strike, reset the System Management Controller (SMC).
http://support.apple.com/kb/HT3964
Intel-based Macs: Resetting the System Management Controller (SMC)

USB port Not working and Drivers won't install

My Ethernet Controller, PCI device, SM Bus Controller, Universal Serial Bus (USB) Controller, and Universal Serial Bus (USB) Controller drivers will not install. Therefore I’m unable to connect to a wired connection and use the two USB ports on the left side of my HP DV6-6C10US Entertainment PC laptop.
I replaced my hard-drive a few days ago and reloaded windows 7 onto my laptop using another recovery disk.
I tried downloading the appropriate drivers from HP but they will not work either.
Product # A6Y49UA#ABA
Thanks for your assistance

Hi:
Download and install the AMD Chipset Drivers and reboot. You want the first file listed on the webpage.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Ethernet:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102406-1&cc=us&dlc=en&lc=en...
PCI Dev:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102202-1&cc=us&dlc=en&lc=en...

Error when installing windows 8 onto my Macbook Pro

I am trying to download Windows 8 onto my Macbook Pro, it is a 2011 Model and is running OS X Lion 10.7.5.
I have created a bootable usb drive through bootcamp with a windows 64 bit iso.
I then go through the Bootcamp wizard, when the computer tries to install windows 8, it cannot recognise the bootable usb. It prompts me to enter a drive. Therefore upon restarting I press the alt key, which allows me to select EFI boot. Once I have done this, it starts the windows 8 wizard. However there is a problem with the partition. It says this partition is in the wrong format, so I press the format option however it still will not continue with the wizard. The exact error it says is as follows:
'Windows cannoy be installed to this disk. The selected disk has an MBR partition table. Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardwarre may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu.'
I've been doing this for the last 6 hours to no avail, surely installing Windows 8 should not take this long. I am not sure what I am doing wrong, if anyone could help I would appreciate it greatly.
Thank you in advance.

Hi Dawn,
Since you're using Boot Camp you should post your questions in the Boot Camp discussions, found here:
http://discussions.apple.com/forum.jspa?forumID=1165
Good luck

One USB Port not Working Properly on MacBook Pro 3,1

I have an older macbook 3,1 running Mavericks OS and recently one of my left USB ports has not been:
1) able to eject external hard drives plugged into it (I have to force eject)-instead it gives me a message that one or more programs may be using it (even though I don't have any programs using it). The hard drive is being powered by USB has a 3.0 connection although this wasn't a problem in the past... I tried the other USB port and it can eject just fine from that port.
2)Intermittent communication with mouse.
Not sure if this is a hardware issue but when I try to run diagnostics on this laptop by holding down the "D" key at startup it doesn't take me to diagnostics. I no longer have the discs for this laptop (containing said hardware test) so I can't boot the diagnostics from that discs. In lieu of a hardware test I opened CONSOLE and did a search for USB and there were a couple of these messages:
8/29/14 12:13:43.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
Is this a logic board issue? Would rolling my OS back to pre-Mavericks work? The problem didn't emerge right when I updated to Mavericks however I have had luck changing OS stuff (updating or rolling back) with faulty USBs...
Here are other troubleshooting methods I have attempted with no success:
-Disk Utlity (repair disk and permissions)
-RESET PRAM NVRAM
-Remove battery
-RESET SMC
-Shut Down
-Run Disk Utility @ startup
I'd love to get access to a Hardware Test compatible with my macbook. The links I have found online are to incomplete files. If someone @ Apple could send some Hardware diagnostics tool my way via a disk image that would be perfect.

Did you boot into Recovery or try & run OS X Utilities, to attempt a test?
Depending on the computer, that may be your best bet, short of taking
the computer to an Apple Store with Genius bar; or to an AASP who is
trained in Apple repair & testing services.
A replacement of original install restore DVD with the correct AHT on
a bootable DVD, could be obtained by contacting Apple support or
the main online Apple sales, or applecare; there would be a fee.
They'd need to know the Serial Number and product info, and you'd
have to provide a form of payment in order to get replacement discs;
and if the computer is way too old, those may be harder to get now.
The main system tools could be installed in Recovery partition.
And Ms Sammit may have answered this.
Good luck & happy computing!
edited

How can I move my itunes library from my old computer to my new macbook pro. It contains purchases music and music I have downloaded from CDs.

How can I move music from my itunes library on an old computer to my new macbook pro without having to buy another application? Some of this music is purchases in itunes, some is downloaded from CDs. I need a easy fix. Not computer genius.

See here: iTunes: How to move your music to a new computer
B-rock

Satellite Pro L10-103 - USB ports not working

Hi, my Satellite Pro L10-103 USB Ports are not working. I've tried various things and lastly my advisor scrubbed my computer clean of all programmes and operating system. After reloading from the set up disk and having lost my some expensive programmes I am no further forward. Still not working.
Does anyone know if this means it is a mechanical problem with the computer? (I'm using Windows XP). Your help would be greatly appreciated.

Try please just to install chipset driver .

HT3986 when installing win 7 pro on my macbook pro retina and win drivers that download from bootcamp the USB ports not works

Similar Messages

Maybe you are looking for