HT3991 is backup 3.2 still necessary?

Using Time Machine and a separat harddisk to make my backups, do I still need Backup 3.2 or may I cancel it?

Nope. Time Machine basically replaced Backup. Backup had the ability to back up online to MobileMe which Time Machine didn't but with MobileMe now being gone I struggle to find anything worth keeping about Backup, and I come up empty

Similar Messages

Camera roll empty but shows 6.1 gb. Restored to original settings after backing up. When I restored the backup camera roll still shows 6.1 gb and is till empty. I imagine that the backup contains some corruption

Camera roll empty but shows 6.1 gb. Restored to original settings after backing up. When I restored the backup camera roll still shows 6.1 gb and is still empty. I imagine that the backup contains some corruption

Hi cfgolf,
Thanks for contacting Apple Support Communities. I agree with your assessment that something is going on with that previous backup. If you restored from that backup and the issue continues, I would recommend restoring and Set up as new. Before you restore, make sure you Transfer content so that you can sync it back after setting up as new. The instructions on how to Transfer content and Set up as new are both listed in this article.
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/ht4137
2. Transfer content
Before you erase your device, take a few minutes to transfer your content from your device to your computer to ensure that all your critical data is safe.
6. Set up as new
Complete the setup assistant. When prompted to set up your device, select Set Up as New iPhone and tap Next to continue.
Skip the Apple ID sign-in, in case the original issue was related to any of your content on iCloud.
Note: After setting up as new, you will need to enter the Visual Voicemail password for iPhone (on carriers that support Visual Voicemail). If you've forgotten the password, contact your carrier to help you reset it.
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
Cheers,
-Joe

RMAN backup files are still exist since long time, how to delete?

Dear sir;
I'm using the below script to do daily backup, however there are many rman backup files are still exist and consumes HD size, how could I delete these files in daily bases? some files dated in FEB, MAR, APR,
============Daily RMAN script=========
rman target /<<!
backup incremental level=0 as compressed backupset database format '/u15/rman/full_backup_%U.rman';
backup archivelog all not backed up 2 times format '/u15/rman/arc_backup_%U.rman';
backup current controlfile format '/u15/rman/control_%U.rman';
delete archivelog all backed up 2 times to device type disk completed before 'sysdate-7';
delete noprompt obsolete;
================================END
Thanks and best regards
Ali

Hi;
Our backup policy should have 7 days; however we have here some files from JAN, FEB,MAR, APR /2012 WHICH ARE BEYOND THE RETENTION DATE and these files should be deleted by executing " delete noprompt obsolete; ".
All files are exist in /u15/rman/
-rw-r----- 1 oracle oinstall 1151763968 Jan 21 01:36 arc_backup_7kn19h4a_1_1.rman
-rw-r----- 1 oracle oinstall 1136882176 Jan 21 01:36 arc_backup_7ln19h4q_1_1.rman
-rw-r----- 1 oracle oinstall 1135984640 Jan 21 01:36 arc_backup_7mn19h5a_1_1.rman
-rw-r----- 1 oracle oinstall 1126627328 Jan 21 01:37 arc_backup_7nn19h5q_1_1.rman
-rw-r----- 1 oracle oinstall 880606720 Mar 12 02:53 arc_backup_7nn5ldhp_1_1.rman
-rw-r----- 1 oracle oinstall 1093043712 Jan 21 01:37 arc_backup_7on19h6a_1_1.rman
-rw-r----- 1 oracle oinstall 9797632 Dec 15 01:04 control_04mu7tcp_1_1.rman
-rw-r----- 1 oracle oinstall 36896768 Mar 3 02:55 control_4cn4tm9k_1_1.rman
-rw-r----- 1 oracle oinstall 36896768 Mar 4 02:53 control_4on50ahm_1_1.rman
-rw-r----- 1 oracle oinstall 36896768 Mar 5 02:55 control_56n52v1j_1_1.rman
-rw-r----- 1 oracle oinstall 16252928 Jan 23 01:40 control_8tn1eq3t_1_1.rman
-rw-r----- 1 oracle oinstall 16252928 Jan 24 01:40 control_9cn1heg0_1_1.rman
-rw-r----- 1 oracle oinstall 202940416 Dec 15 01:04 full_backup_01mu7t50_1_1.rman
-rw-r----- 1 oracle oinstall 1097728 Dec 15 01:04 full_backup_02mu7tcc_1_1.rman
-rw-r----- 1 oracle oinstall 201285632 Dec 14 01:04 full_backup_0nmu58ou_1_1.rman
-rw-r----- 1 oracle oinstall 5957304320 Feb 29 02:46 full_backup_2ln4g9l1_1_1.rman
-rw-r----- 1 oracle oinstall 4128768 Feb 29 02:47 full_backup_2mn4gft8_1_1.rman
-rw-r----- 1 oracle oinstall 6027075584 Mar 1 02:49 full_backup_32n4o6ov_1_1.rman
-rw-r----- 1 oracle oinstall 4128768 Mar 1 02:49 full_backup_33n4od66_1_1.rman
-rw-r----- 1 oracle oinstall 6187171840 Mar 2 02:51 full_backup_3gn4qr50_1_1.rman
-rw-r----- 1 oracle oinstall 4145152 Mar 2 02:51 full_backup_3hn4r1kn_1_1.rman
-rw-r----- 1 oracle oinstall 6115786752 Mar 3 02:51 full_backup_40n4tfgu_1_1.rman
above is a short list of contents.
to do our daily backup we perform the following script (in daily)
==================
backup incremental level=0 as compressed backupset database format '/u15/rman/full_backup_%U.rman';
backup archivelog all not backed up 2 times format '/u15/rman/arc_backup_%U.rman';
backup current controlfile format '/u15/rman/control_%U.rman';
delete archivelog all backed up 2 times to device type disk completed before 'sysdate-7';
delete noprompt obsolete;
==================
Thanks and best regards
Ali

Is an audio interface still necessary?

I am using
Logic Pro X, Samson L2400 24 channel mixer connected via USB, is an audio interface still necessary to record all 24 tracks separately?
Noob hardly expresses my incompetence here so thank you for your patience.

MacDyver wrote:
I am very appreciative for the assistance however it confuses me slightly more in that I do have a Roland Octa-Capture however it also connects via USB. I guess it is also useless
Articles I read state USB can theoretically carry 255 channels but everything else points to L/R Stereo.
It appears a fire sale is in order and purchase of a firewire mixer or interface may be my only option
Thanks everyone hope I can find a solution
I don't quite get your conclusion: the fact that an interface connects via USB, does not make it useless. And according to a quick look at specs the octacapture aka UA1010 has 10 inputs; you could aggregate that with the Samson and another interface with at least 12 inputs, and there you have your 24 inputs: 10 from the UA1010, 2 from the Samson itself, and 12 from whatever extra interface you'd use.
Getting one interface with 24 or more inputs may be a more secure and simpler route to take though.
I also don't get why you almost blame our appreciated assistance - by "howevering" it - for confusing you about your 10-input audio interface, when you never even mentioned you had it in the first place?

I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!

I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!

Would throwing it in Recovery mode and restoring as new clear it up?
(same for Ipad)
Step 1: Turn off the iPhone. To do this press and hold the power button till you see the “Slide to Power off” screen. Now slide the button to turn it off.
In case your iPhone is stuck in an infinite loop and the previous option is unavailable, press and hold the Power and Home button till the screen goes off. Remember to leave both the buttons as soon as the screen goes off and before the Apple logo appears again.
Step 2: Connect the iPhone’s USB cable to your computer but not to your iPhone yet.
Step 3: Now hold down the Home button and while you are holding it connect the USB cable. Keep holding the Home button till you see the Connect to iTunes screen on your iPhone(Screenshot shown below). iTunes will show an alert saying a device in recovery mode has been detected.
Here’s what your iPhone screen will look like once its in the iPhone Recovery Mode.
Read more: http://www.callingallgeeks.org/15018/how-to-put-iphone-or-ipod-touch-into-recove ry-mode/#ixzz296y04ygX
Under Creative Commons License: Attribution No Derivatives
THEN RESTORE THE DEVICE AND SETUP AS NEW. JUST YOU WILL HAVE TO DOWNLOAD YOUR APPS AGAIN(FREE) ETC....
LEAST THE SECURITY WORKS HAHA!!! I also wouldnt get upset, be thankful you found it.

HT3406 Can I restore a new Iphone 5 from an existing 4GS backup and then still use the existing backup?

Can I restore a new iphone 5 from an existing 4GS backup and then still use the 4GS backup for another phone?

Sorry, a 4G. Its not my phone. its for my employer. He just got a 5 and wants both phones to use the same backup information in itunes.

I had backup my iphone .. and it started but later it showed no space .. so i had gone to preference device and deleted the backup.. but still my iphone shows the availabilty as zero..plz help

i had backup my iphone .. and it started but later it showed no space.. so i had to stop the backup..and had gone to preference>device and deleted the backup.. but still my iphone shows the availabilty as zero..plz help.. how to get the available space that was before..

rabidrabbit wrote:
Can I back up my iPhone 4S to my ipad 3 (64 gb)?
no
rabidrabbit wrote:
However, now I don't have enough space in iCloud to backup either device. Why not?
iCloud only give so much space for free storage, then if you exceed the limit of 5gb you have to pay for additional storage.

HT1414 its saying on itunes that my backup is corrupt so i went to edit preferences devices and deleted all my backups however its still saying the same

I have recently purchased a iphone 5 and i am trying to back up the phone however its saying the back up is corrupt so i went to edit preferences devices and deleted the backups however its still saying the backup is corrupt and not letting me sync my music

If you can't get the password correct, you CANNOT restore from that backup.
However, if you've been using your phone as recommended by Apple, there should be minimal data loss.
Your iTunes library is on your computer, so you can synch all your apps, music, movies, ringtones, etc, on to your new phone.
Similarly, contacts should be synched to Address Book, Outlook, or a cloud service for you to easily synch back to your new phone.
Pictures taken from your old phone and not synched to your computer are lost, but you would have been synching those photos to your computer frequently as recommended. Other photos that you synch TO your iPhone are still on your computer.
You won't be able to get text messages back.

Heatsink replace still necessary or not?

after getting rid of the rss with the help of firmware - is it still necessary to replace the heatsink?

Halli,
Thanks for the link.
The article came out on September 6th, so the firmware update it refers to is the previous one.
The writer's understanding of the issue seems to be a little patchy. For Example:
• He refers to the "CPU thermometer itself". In fact there are four heat sensors built into the CPU, but none of them are involved here. The problem is with one of the two thermistors which are part of the heat sink assembly.
• Any short circuit is likely to be caused by the insulation on the thermistor's leads being damaged by heat rather than by expansion of the heat sink.
• There was no relocation of the sensor and cable on the new heat sink, just added protection.
I can't see any reason at all for a recall now; most people are not affected by the issue and most of those that are can easily fix it in one minute with the firmware update.

HT1386 Is it still necessary to sync to your desktop iTunes?

I would like to load Windows 8 Release Preview to my Dell PC. I also have an iPad and iPhone - which I'm assuming will not be able to be synced any more, when I do that. Is it still necessary to do a sync to iTunes, or can these devices now stand on their own, with the advent of iCloud, iTunes Match, and so on?

Thank you, my friends. I'm going to save my dough and buy an iMac, which is what I really want anyway. There is just far too much uncertainty at this point surrounding Windows 8, not only with regard to iTunes but other key pieces of software as well. The disclaimers and warnings Microsoft is publishing about the release preview make my hair stand on end.
I'm not a techno geek and have no interest in being. I do like for things to work the way they're designed, with no surprises. Which is why the iPad and iPhone seem close to miraculous.
Thanks again, folks.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Trying to rebuild my iphoto library from time machine backup and it still says 0 restored with a grey screen and the circle. How can i restore my library?

I just bought a new Macbook pro and i tried to rebuild my iphoto library from a time machine backup on an external hard drive. Even after pressing command+option when starting iphoto and selecting rebuild library from automatic backup, it still doesn't work with the grey screen with the white circle and a little window that says 'rebuilding library: 0 versions restored'. I also tried to make a copy of my iphoto library but that did not work either. how can i restore my iphoto library or at least gain access to my photos?

Your question is not clear
Rerairing or rebuilding the iPhoto library never involves using Time Machine in any way
TM is a totally seperate program and you can "restore" a file (including the iPhoto library) from the past using TM - you launch TM and go back to the time you want and select the file (or folder or package) you want and click restore - it probably is best to keep the current one until you are sure everything is good
LN

Have a new phone and have been waiting two days for the backup to finish. still no photos or music on the phone yet, help?

have a new 5s and started the backup down load on sat nite ..... still have no music or photos yet?

Hi there jeannene,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
-Griff W.

Are screensavers still necessary?

Is a screensaver still needed? I have a Mid 2013 13" MacBook Air. I'm curious if I need to be concerned with using a screensaver. I use one when I'm in public or around others, just to ensure privacy and all. But when I'm alone, can I just turn off my screensaver? Is there a possibility of image retention or screen burn in from not using a screensaver on modern displays?
Thanks for any direction you can provide.

pmpknetr21 wrote:
Hey OGELTHORPE,
If memory serves me right, screensavers were originally created to ensure that older CRT monitors would not experience burn in or image retention when left on a particular screen for too long. Considering that, it begs the question, are they still needed for computers with modern monitors?
I have noticed a few retina MBP owners raise the issue if image retention on their displays so perhaps for them it is an issue.
Or will I damage my MBA screen if I do not use a screensaver?
Though not 'proof positive' I have not seen any such complaint for 'ordinary' led MBPs or MBAs nor have I witnessed any such issue with my equipment. One could argue that it may not be necessary, but then a nice screen saver does have some entertainment value. I can leave it for each individual to decide if they want it or not.
Ciao.

People Cannot Hear Me When I make Calls on iPhone 4, Bought a new iPhone 4, uploaded all of my own information from the backup, and it still doesnt work, help!

I went in to apple, they couldnt figure it out, I am on AT&T so I was figuring on going into their store today and seeing if its something with the network, if not I am going back to apple, but this is literally a brand new phone i bought yesterday, not refurbished or anything, brand new, does anyone know why this isnt working? Everything else works fine, the mics both work, its just when I make calls or someone calls me the mic doesnt work.

When you see the same issue on more than one hardware device, it means that the problem is likely to exist outside of the hardware. Two things to investigate would be the software/firmware on the backup and issues with the cellular network. It's probably safe to rule out the cellular network as well.
First, make sure that you have imported copies of all the information (pictures, videos, documents) on the device. Do this thorough itunes, and the applications (photographic and document processing) on your computer. Perform a firmware update then restore the device as new. If the problem persists, then you may actually have the worst luck and discovered two devices with an identical issue.
Read each of the steps before initiating the DFU.
!. Connect the iPhone to any computer running a fully updated version of iTunes.
2. Press and hold both "home" and "sleep/wake" buttons
3. After eight seconds let go of only the sleep/wake button.
4. Keep holding the home button until you see a popup mesage in iTunes.
5. Read all all the popups, then use iTunes to update the iPhone's software.
If the popup fails to show, repeat steps 2 through 4

HT3991 is backup 3.2 still necessary?

Similar Messages

Maybe you are looking for