HT4059 Can't update iPhone4S software 6.1.2 to 6.1.3, because there is unknown error 3198. What is that error? Everything else works, but the update.

Is there any explanation for the error 3195. I can't find reasonable answer.
Everything else works, but the new 6.1.3 has not updated, bevause the mysterious error 3198.

Thank you for attention, about the error code. It was 3195, but it is no longer problem, because I managed update iPhone by my homecomputer. The PC in my work wasn't "up to date". Case is closed.

Similar Messages

I have a white screen for imessage. Everything else works but I can't do anything on imessage.

I have a white screen for imessage. Everything else works but I can't do anything with imessage. How can I fix this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Messages>Send and Receive and sign out and sign back in
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

I have an iPod G2 with a firewire 400 lead. how can I attach it to my new 13 inch Mac book Pro, is there a 400 to 800 firewire converter. USB lead wont work with the Macbook Pro. iPod used as an external drive to archive memory cards on the go.

My G2 iPod that I use as an external drive to archive memory cards on the go cannot link with my new 13" Macbook Pro cause it uses a firewire 400 lead. It will not work with a USB lead. Is there a firewire 800 ipod lead or converter available? Can any one shed some light on this please?

As far as I know, if a harddrive works with a Macpro, it should work with the Macbook: if your Macbook is low on power, plug in the AC adapter
If your Macbook has a firewire port, then it should be fine. BUt i would do somemore research first.

I updated iTunes and now cannot hear my audiobooks. Everything else works, but not audiobooks. How do I fix it?

I received an alert saying that it was time to update iTunes and I did. When I went to listen to an audiobook on my computer it played, but no sound was forthcoming. I tried all the other venues(music. podcast,etc) and they all work fine. The books are from audible.com and I have 42gb of them, so this is s first time problem.
What do I need to do?

There may be a work around... Am unsure how you are adding the file to iTunes, if youre importing it directly or not, but this worked for me...
Delete existing entry in iTunes (right click on the audiobook and show in windows explorer and delete actual file also)
Redownload audiobook with Audible Download Manager.
When asked if you want to download directly to iTunes, select NO
Locate downloaded file, drag and drop into iTunes library, should now play.
I think Ronson58 maybe right that it has something to do with iCloud affecting the DRM signing for that file, which has been broken by the iTunes update, and reimporting in this way recreates the DRM signature.
I hope this helps. Please post back with any findings.

I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.

I am trying to update to iTunes 10 to us my new iPad, but I can not remove a corrupted? "apple software update" program... I can get everything else off, but due to "previous version" of software update it will not continue.
I stopped in to see one of the genius at the local store who referred me to "Windows Installer 4.5 Redistributable" (I am trying to install it on a Windows XP System)
The last version on iTunes on my PC was iTunes 7.
Thanks for your help,
Julia from Woodridge

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

I can't upgrade my iphone4 from iOS5.01 to iOS5.1, tried many times, always showed "unknown error 1602", what should I do?

I can't upgrade my iphone4 from iOS5.01 to iOS5.1, tried many times, always showed "unknown error 1602", what should I do?

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

What can I do about driver updates that will not install because of an "unknown error".

I have an HP p6530 Pavilion that is taking a while to startup. Not real long but longer then it should. I tried to install driver updates from Intel for the Chipset and RAID but when I download and install it will not finish the install because of an "unknown error" and then setup exits. I could really use advice from anyone that can help.

Have you tried to disable your virus protection and any running programs in the system tray? Turn off any programs that are not necessary before you run the updates. Make sure you run the updates as administrator (right click on the driver install program and click on run as administrator).
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Can't get Rush Limbaugh Morning Update to download to my iPod. Everything else works, all 3 hours

Can't get Rush Limbaugh Morning Update to download to my iPod. Everything else works, all 3 hours

Can't get Rush Limbaugh Morning Update to download to my iPod. Everything else works, all 3 hours

MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolv

MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolve this problem?

Try booting in Safe Mode by holding your Shift key down when booting. Also, try holding the eject key down when booting to eject the DVD. If you plug a mouse in and hold the clicker down when booting, that should eject the DVD.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Hi, can anyone tell me, if i purchase a used iphone4, how will i be able to register it with my apple id? currently what ever i do it asks me for the apple id and password of the previous owner. Please help

hi, can anyone tell me, if i purchase a used iphone4, how will i be able to register it with my apple id? currently what ever i do it asks me for the apple id and password of the previous owner. Please help

you have to restore to ios 6 and then sign in with your own apple id,
any apps etc on the iphone now, will not be able to be backed up and used in the future as they are not linked to your apple ID. and if you plan on using the previous owners ID then you need there [*** which I assume you dont have.
simply just restore using itunes then setup as new with all your details and your done, you can go to the appstore and start getting your own apps

I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions? Thanks!

I did an auto software update on my iMac, which included a restart. When the machine restarted it's stuck with an Apple logo and spinning wheel. I've tried all of the key strokes that are supposed to work, but nothing has. Any suggestions?

Gray screen could be any number of things, bad third party at boot kext file, a bad Apple one, a bad install/upgrade of OS X, drive corruption etc.
Run through this list of fixes
Step by Step to fix your Mac

TS4268 My iMessage doesn't work on my iPad. My software is up to date, wifi is working, apple ID is working but the verification stops and goes back to sign on. Why does this happen?

My iMessage doesn't work on my iPad. My software is up to date, wifi is working, apple ID is working but the verification stops and goes back to sign on. Why does this happen?

Look at no. 5 in this text which was copied from Apple's support site for troubleshooting Messages and FaceTime activation.
Troubleshooting Apple ID activation
After each step, toggle iMessage and FaceTime off and then on again in Settings > Messages and Settings > FaceTime.
Update to the latest version of iOS.
Ensure that you have an active Internet connection. You can complete activation using Wi-Fi or a cellular data connection. Check your Wi-Fi network using standard Wi-Fi network troubleshooting.
If you receive an error when signing in to your Apple ID, visit myinfo.apple.com, sign in to your account, and ensure that the primary email address has been verified.
Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
In Settings > General > Date & Time, ensure that Set Automatically is on. If Set Automatically is on, but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
Enable iMessage and FaceTime while connected to another Wi-Fi network in a different location.
This is the support kb article.
http://support.apple.com/kb/ts4268

I have an iphone 4s and was restoring it from a back up and now all i get is and unknown error occurred (29) halfway through the restore. Any ideas on what I can do?

I have an iphone 4s and was restoring it from a back up and now all i get is and unknown error occurred (29) halfway through the restore. Any ideas on what I can do?

Your error is connect to hardware, try these steps to solve it:
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
copied from Resolve iOS update and restore errors

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone help?

Found the answer on the HP site. It's the original software that works with this printer OS X 10.6!!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3558902&prodNameId=3562006&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=ma-60835-3

HT4059 Can't update iPhone4S software 6.1.2 to 6.1.3, because there is unknown error 3198. What is that error? Everything else works, but the update.

Similar Messages

Maybe you are looking for