HT4059 returning to library in iBooks once in document

I have created many PDFs and transferred to iBooks. When I first open iBooks I can see the library. Once I go to a specific pdf, how can I return to the Library without exiting iBooks and reopening?
While in a news app returning to previous screen without exiting escapes me as well. Any ideas? thank you.

With iBooks if you tap the PDF you should get a bar along the top of it with a Library button at the far left of it - tapping that should take you back to your bookshelf and therefore able to open a different PDF or book.
In terms of other apps, then that will depend upon the app and its method of navigation. If it's not obvious in the app itself, then if you look at the app's description page in the app store then it should have a link to the developer's webpage, which might have a help section/FAQ/manual for how to use it.

Similar Messages

  • Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?    Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud?

    I have 2 questions about the new Photos app for Mac (I'm running 10.10.3 on my MacBook Air 1.8GHz Intel Core i5 mid 2012)):
    1.Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?
    2. Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud?  That would free 59GB off my Mac and that would be very good.

    1.Should I delete my old iPhoto Library Current folder once everything is transferred to Photos Library Current?
    You can, but I would wait, until you have have been working with Photos for some time and are sure, that everything migrated well. There may be hidden flaws in your library and teething problems with Photos. Don't be in a hurry to abandon iPhoto completely. You may need to go back, until bugs have been fixed.  Th Photos Library does not duplicate the photos in your iPhoto Library. the media files are shared and do not need extra space: See:  Photos saves disk space by sharing images with your iPhoto or Aperture libraries - Apple Support
    2. Does this mean that all my new photos on any device can come off my Mac and ONLY be in the Photos Library which is in the cloud?  That would free 59GB off my Mac and that would be very good.
    If you have enough iCloud storage.  But Photos will still need space for local thumbnails on all devices.
    See:  Apple - OS X - Photos Preview
    Fill your library, not your device.
    iCloud Photo Library can help you make the most of the space on your Mac. When you choose “Optimize Mac Storage,” all your full-resolution photos and videos are stored in iCloud in their original formats, with storage-saving versions kept on your Mac as space is needed. You can also optimize storage on your iPhone, iPad, and iPod touch, so you can access more photos and videos than ever before. You get 5GB of free storage in iCloud — and as your library grows, you have the option to choose a plan for up to 1TB.

  • Early return of library book

    I have a library book in ADE that I want to return early.  The instructions say open the book, click on Item Info to do this.  But when I click on Item Info there is no option to Return Early.  All I see is File Path info on the book, the publisher info, date borrowed, etc. but no Return Early option.  Anybody help?  Thanks!

    Look in the top left  corner on ADE screen.  You should see a little thing that looks like 3 books.  Try clicking on it.  To return a book click just before the name of the book and you will see options listed.I think this will help, hope so.
    J. Katie Schultz
    > Date: Tue, 26 Jul 2011 12:23:47 -0600
    From: [email protected]
    To: [email protected]
    Subject: Early return of library book
    I saw your post when looking to return a library book; and I have to ask..where is
    the Library View?  I can't find it anywhere in my account, which doesn't even show I ever borrowed anything. Very confusing...I'm tempted to leave it on, even though there is a waiting list for the book.
    >

  • How can I remove the iPhoto upgrade to my iMac OSX 10.2.8? Can the upgrade return my library?

    How can I remove the iPhoto upgrade to my iMac OSX 10.2.8? Can the upgrade return my library?

    With respect, we'll need rather more detail than that.
    In general, you can only roll back an upgrade to a library with a back up. No back up, no roll back.
    Regards
    TD

  • How can I see how much I paid for an iBook once it's been downloaded?

    How can I see how much I paid for an iBook once it's been downloaded?

    A complete purchase History is also accessible from iTunes on a computer.

  • HT5557 Create Private Class Library in Ibooks?

    I am a teacher, and I have a class set of Ipads #2 (not siri).  I want the students to create books in ibooks, and I want them to publish them to ibooks.
    I want the students to be able to read each others' books on their own devices and at home or in the classroom.
    I do not want the general public to be able to access the books.
    How can I create a "private library" in ibooks for my students?
    Thank you for any help or suggestions.

    It is true that the .NET platform is doing away with DLLs and actually, it's doing away with tradition ActiveX also. It will be based on objects called Assemblies.
    If you have an actual ActiveX component, you can call this from both LabVIEW 6.1 and VB6. However, if the object that you have built was built in the .NET environment, then it is an Assembly object. And, since this technology was released after both VB6 and LabVIEW 6.1, neither platforms support .NET controls yet. VB6 will most likely never support Assemblies, although I assume LabVIEW will as future versions are released.
    J.R. Allen

  • Return order with reference to the billing document created via IDOC.

    Dear Colleagues,
    I’m struggling to understand and confirm whether standard functionality of ORDERS05 idoc allows creating a return order with reference to existing billing document?
    I have tried using standard segment E1EDK02 and E1EDP02 with qualifiers 009,010,011,087 but unfortunately idol is not creating a return order with reference and ignoring this segment.
    Have any one came across similar problem? If yes then will be grateful for sharing his experience.
    Best regards,
    AL

    Dear Friend
    Welcome to SDN
    Return order is itself a challenge to SAP standard settings
    There are some scenarios
    1. Return order qty should not be increasesd say Billed qty of material X is 20 units
    While returning Material X should be a maximum of 20 units
    If made 21 it should throw error T code OVAH message class V4 message no 299 convert from warning to error thro customization
    2.Return order should be created only once referencing billing doc
    To control that T code SE91 message class V1 message no 499 convert from warning to error thro ABAP help
    3 Your issue is same like case 1 but the material X is entered as second line item in the return order with some qty
    This case system is not throwing even a warning
    Yes correct
    This is to be handled with userexit
    Discuss the same with ABAPer
    Check these threads on return issues which is of different scenario than of yours
    Forum post in ERP - Sales and Distribution (SD) General: Order Qty.
    Order Qty.
    Forum post in ERP - Sales and Distribution (SD) General: Return order
    Return order
    Regards
    Raja

  • Return order with reference to the Billing Document

    Hi All,
    This is with reference to issue that when I create a Return order with reference to the Billing document
    I had one line item in the billing document say xxx of quantity  4  I had done the setting in the
    system messages V4 229 to convert the warning to error messages for billing quanity to order quanity
    If I enter in the first line item 8 insted of 4 system will throw a error but the issue is the same item xxx of qty 4 is entered in the second line item  and system allows to save the return order how to stop  this
    Please give the valuable feedback.

    Dear Friend
    Welcome to SDN
    Return order is itself a challenge to SAP standard settings
    There are some scenarios
    1. Return order qty should not be increasesd say Billed qty of material X is 20 units
    While returning Material X should be a maximum of 20 units
    If made 21 it should throw error T code OVAH message class V4 message no 299 convert from warning to error thro customization
    2.Return order should be created only once referencing billing doc
    To control that T code SE91 message class V1 message no 499 convert from warning to error thro ABAP help
    3 Your issue is same like case 1 but the material X is entered as second line item in the return order with some qty
    This case system is not throwing even a warning
    Yes correct
    This is to be handled with userexit
    Discuss the same with ABAPer
    Check these threads on return issues which is of different scenario than of yours
    Forum post in ERP - Sales and Distribution (SD) General: Order Qty.
    Order Qty.
    Forum post in ERP - Sales and Distribution (SD) General: Return order
    Return order
    Regards
    Raja

  • Need to do one field as non editable once a document is moved to 'executed' phase.

    Hi All,
    I have a field called 'comment' in Contract document. And once the document is moved to Executed phase all the fileds becomes non editable. And since 'Comment' is free text my user wants to do it as editable even when the document is in executed phase.The phases include
    1.Draft
    2.Budget Owner Approval
    3.Financial Approval
    4.Procurement Approval
    5.Approved
    6.Digital Signature
    7.Executed
    I tried this both in post phase script as well as pre phase script and found it's not working. Please suggest your ideas. Is there any other place I need to add code.
    Postphase
    if (phase.equals("Executed"))
    logMsg.setLogMessage(" Executed START ");
    Logger.info(logMsg);
    //Changes done by me
    comments = doc.getExtensionField("NON_DIGSIG_COMMENT").get();
    logMsg.setLogMessage(" Comments are " + comments);
    Logger.info(logMsg);
    IapiDocumentLockManager.unlockField(session,doc,"NON_DIGSIG_COMMENT");
    //Changes ended
    parent = doc.getParentIBean();
    if (hasValue(parent))
    // get associated vlv value for phase
    ValueListValueIBeanHomeIfc vlvHome = IBeanHomeLocator.lookup(session, ValueListValueIBeanHomeIfc.sHOME_NAME);
    if (classinfo == 1004)
    {// parent is Master Agreement
    vlvBean = vlvHome.findUniqueByNameType("Executed Agreement",10);
    } // end if classinfo == 1004
    else
    vlvBean = vlvHome.findUniqueByNameType("Executed Agreement",1);
    } // end else
    if (hasValue(vlvBean))
    vlvLocalizedRef = vlvBean.getLocalizedObjectReference();
    // set parent status
    parObjRef = doc.getParentIBean().getObjectReference();
    parentHome = IBeanHomeLocator.lookup(session, parObjRef);
    parentHome.upgradeToEdit(doc.getParentIBean());
    doc.getParentIBean().setStatusRef(vlvLocalizedRef);
    logMsg.setLogMessage(" Parent Status updated to " + vlvLocalizedRef.getDisplayName() + " ");
    Logger.info(logMsg);
    parentHome.save(doc.getParentIBean());
    logMsg.setLogMessage(" Parent saved ");
    Logger.info(logMsg);
    } // end if hasValue(parent)
    logMsg.setLogMessage(" Executive Summary Approval END ");
    Logger.info(logMsg);
    Prephase
    if (hasValue(other_phase) && hasValue(phase) && phase.equals("Approved") && other_phase.equals("Executed"))
            logMsg.setLogMessage("Entering comment block");
            Logger.info(logMsg);
            //Changes by Lakshmi
            comments = doc.getExtensionField("NON_DIGSIG_COMMENT").get();
        logMsg.setLogMessage(" Comments are " + comments);
        Logger.info(logMsg);
        IapiDocumentLockManager.unlockField(session, doc, "NON_DIGSIG_COMMENT");
            if (!bypassCheck)
            ae.chainAtEnd(doc.createApplicationException("NON_DIGSIG", "zclm.contractdocument.advancetoexecutedfromapproved"));
        } // end if (hasValue(other_phase) && hasValue(phase) && phase.equals("Approved") && other_phase.equals("Executed"))
    //Block added my me
        if (hasValue(other_phase) && hasValue(phase) && phase.equals("Digital Signature") && other_phase.equals("Executed"))
            logMsg.setLogMessage("Entering comment block");
            Logger.info(logMsg);
            comments = doc.getExtensionField("NON_DIGSIG_COMMENT").get();
        logMsg.setLogMessage(" Comments are " + comments);
        Logger.info(logMsg);
        IapiDocumentLockManager.unlockField(session, doc, "NON_DIGSIG_COMMENT");

    I agree with the definition of a position - that it's an occurrence of a job in an Organization. And I also couldn't agree with you more: that defintion shouldn't preclude you from moving the position around the company with re-orgs etc.
    Sadly that's a limitation of Oracle HRMS and there is no way to change the Organization of a position. You'll just have to streamline your processes to clone positions instead. Here, Position Copy is your friend:
    *HRMS Manager > Work Structures > Position > Position Copy
    There are also other tools that may help. Check out:
    Need To Change the Organization Associated with a Position [ID 375483.1]
    Does that help?

  • Print should come only once per document number

    Hi All,
    I have done a script for the WC Document,
    But now the client requires it to print it only once for a particular document number,
    How can we do. Is there any such coding to restrict the print only once per document.
    If anyone knows the solution please post it

    hi
    check the entry in nast table if you find more than 1 enrty that is repeated print .....
    select objky
             kschl
             erdat
             eruhr
             vstat from nast into table gt_date
             where objky eq gv_del_num. ---> document number
      if sy-subrc eq 0.
        sort gt_date by objky erdat descending .
        describe table gt_date lines lv_n.
        if lv_n gt 1.
          gv_repeat = lc_x.
        endif.

  • Photos Return to library when moved to My Book external hardrive.

    I move photos from Iphoto to My Book for more space. Once moved, they always return to my iphoto library. Help. Thank you

    You need to tell us what you did and what is happening
    the only way to move your library and increase space on your iBook it to quit iPhoto and drag the the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto and select the library on the external drive - fully test it and then you can delete the iPhoto library on the internal drive
    LN

  • HT4059 I store drawings on IBooks for use in the field. Is there a maximum storage amount ? I have not been able to download additional drawings lately.

    I store drawings in I books for use in the field, which comes in very handy. Lately I haven't been able to download anymore drawings or PDF's to IBooks. Is there a storage limit?

    I have done this on numerous occasions but I think that my Iphone has a defect. After many tries, reinstalls, deletion of content, changing content to be stored on external hard drive, deleting itunes and cleaning computer I managed to get all of the songs on and things seemed okay for a while.
    The problem returned about a week ago after downloading a new album from Itunes. I now have 12.5k of songs leaving 10gb spare on Iphone which should be more than enough room to operate properly. Last night it seemed to be dowloading ok (after doing all of the above again for the umpteenth time) this morning it revealed that it had just synched 2.5k of songs and 18gb of "other" on the contents bar. it wont synch now as it says its over capacity. So the 18gb of "other" would probably be corrupted data that means it must corrupt each song as it tries to synch it.
    The 2.5k of songs it did synch are working on the Iphone as is every song in the library on Itunes. I did completely delete the new album I bought and redownloaded it from the store then tried to synch just that album and it worked fine.
    Just about time to dump apple I think!

  • Deleted song keeps returning to library

    I described this problem originally on this post as a song mysteriously replicating itself and automatically playing when iTunes launches. Here is what I've done so far:
    physically deleted the directory the song was located and removed it from the system (emptied recycle bin and cleared it from the lib.) Looked after I did this, and the song and its associated folder were removed from the iTunes directory. Then searched the etire system for any reference to the file... nothing. Restarted iTunes: the file returned to the library and physically returned to the directory structure of the iTunes subdirectory.
    deleted all references to the song again. deleted the iTunes library file and recreated the library file according to the online instructions. WHen I restarted iTunes to recreate the library, nothing was there except the phantom song! I looked and once again, it recreated the sub-directory structure for the artist / song.
    deleted all references to the file again. deleted the library file again. uninstalled iTunes. deleted xml file. The only thing left was the actual directory which had all my music, except the phantom song I deleted and removed from the system. downloaded a fresh copy of iTunes. Installed. What appeared in the library after the install? you guesssed it, the phantom song.
    This all started when I upgraded to version six, so I looked for a previous version of iTunes to download and could not find one.
    Any insight? Know where I can find an older version of iTunes? Any ideas to keep Cyndi Lauper off of my freakin' computer!?!

    Activity Window - is from the WINDOW menus on the menu bar in mail - this shows how the logging in, picking up mail, synchronizing mail etc is going.
    Your mail keeps coming back because you are not waiting for the synchronization to finish.
    You can also stop an activity by pressing the stop sign.
    What may be happening is your mail is resynchronizing because you upgraded the software.
    To check mail setting for an account - right click on its mail-box to edit the account.  Settings depend on the service you are syncing.  I only have 2 and Mac is different from my main mail account - Mac defaulted to never remove messages from the server - meaning it won't do an auto purge -- but will delete and purge them if you delete (wait for sync to occur) then using the mailbox menu - erase deleted items in that account or all accounts.
    You can also choose to have deleted items moved to the trash folder in mail -- remember you have to erase them to get rid of them permanently - and before you do that you have to wait for the synchronization to occur.
    (Took a while to get this in and hope it takes because apple keeps cutting out to page not found)

  • How do I return an unopened refurbished iBook for a complete refund?

    I ordered a refurbished 14 inch ibook a while ago and it has been sitting in an unopened box ever since. It cost about $1050. I bought this before the new intel MacBook's came out, and now that they are out, they are much better than the ibook's. Plus the iBook 14 inch is a weird ratio.
    How would i return my unopened ibook for a complete refund and only pay like 50 bucks more for a new macbook?

    Welcome to Apple Discussions!
    It depends on the store you bought it from. Read the policies of the store you bought it from, if they are posted on the web. Your "awhile ago" doesn't tell us anything about the number of days. If you have no idea when you bought it, but bought it by credit card, you can usually call the store and ask them with your credit card number to verify when that was. Most stores I've seen have a time limit on returns. Some do not accept refurbished products back. It is best to check with the individual store.

  • Can I have an iTunes Library on an external HD, and have it appear under 'Shared' so I can use two library's at once?

    Hey guys, here's a weird one - I have a large library on my macbook for my DJ music. Now I want to convert all my old albums to AIFF for listening purposes, and not DJing, so I don't want to cram them all into the lappy HD.
    I have a NAS, which shows up as a 'Shared' Library. Can I create a library on an external Thunderbolt portable HD and have it do the same? Or will that only work on Network HD's.
    I know the trick to hold Option and select your library at startup for multiple librarys, however I want to use them both at once.
    Any ideas?
    Cheers!

    Thanks for the reply.
    Basically, I want to plug in an external HD, and have it appear under 'Shared' Libraries, just like what happens when I'm connected to my NAS Server. If this is possible, of course.
    See pic below.

Maybe you are looking for