HT4059 While searching through titles of books to purchase, IBook will automatically shut down right in the middle of viewing a book! Why does it keep doing it? I am current on all updates!
I keep getting booted out of IBooks while I am searching through books to purchase! I can't figure out why it keeps doing it! I am current with all
Updates. It soesn't do it when I am reading,only in the store! Any ideas?
I keep getting booted out of IBooks while I am searching through books to purchase! I can't figure out why it keeps doing it! I am current with all
Updates. It soesn't do it when I am reading,only in the store! Any ideas?
Similar Messages
-
I plugged my iphone in to my laptop to update it and the computer shut down right at the end. My phone now has the itunes symbol and an arrow asking me to plug my phone into itunes (I assume the laptop). It's frozen like that even when switched off. If I plug the connection into the laptop it's not recognising it now. HELP!
Hello there, xkatiex255.
The following Knowledge Base article should provide the steps for you to resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
While on mac the screen went to line bars and now that is all that you can see. It will not shut down. Pulled battery ans left it out for 3 hours. put it back in and it is still on the line bars.
http://support.apple.com/kb/HT1808
-
I recently updated a app on my iPad 2.it asked me to turn it off then on so I did .now every time I turn it on the apple logo appears then it automatically shuts down an does the same untill the battery's gone ?
You probably need to restore your iPad now. Pay attention to the last part of this kb article where it explains about using recovery mode. You may need to restore the iPad using that method.
iTunes: Restoring iOS software -
I'm running a Macbook Pro circa 2007 with OSX 10.6.8 and Firefox 27.0.1, and just had a circumstance that really puzzled me. I have a Hughesnet satellite modem with wireless router that I connect to via the airport, and I use Little Snitch software in the demo mode so I know and have to approve which software can send info through the internet connection., but the demo mode had just timed out and terminated and within a half hour of that the computer fans started speeding up to max and the CPU got blazing hot (+200 degF).
Worried, I looked at the activity monitor and it was showing lots of internet activity even though I wasn't doing anything on the internet at the time, and I have all my software updates set to manual because otherwise they would use up my allotted daytime bandwidth and leave none for me. I'd already completed manual software updates during the nightly free time recently. Fearing my computer was hijacked & out of my control, I turned the airport off to terminate the internet connection, BUT IT DIDN'T TURN OFF, and though the indicator in the top right of the screen said it was off, packets were still streaming back & forth like crazy on the activity monitor, and the poor thing was still overheating. So I rebooted the computer, and when it came back up there was no internet activity, and things started cooling down, back to normal again.
Though I'm no techie, this seems to me like my computer has been hijacked by some virus that has taken control of the airport and is feeding me lies about the internet connection status, so that it can use my computer for sending out its own messages. Has anyone heard of a virus that prevents the airport from being turned off, and what should I do about it? I'm afraid to back up my data with my time machine, though its been months since that was done, for fear I'd overwrite a virus-free state of the time machine files with a virus laden one, but I also hate to do something to clean up the machine without backing up my files, and lose a bunch of data. Is there virus protection software that could surgically search out and remove only the virus from my machine and leave most everything else untouched?
Any advice is welcome,
ChristinaHI and Welcome to Apple Discussions...
Try Changing the Airport Channel
Open AirPort Utility, located in the Utilities folder in the Applications folder on a computer using Mac OS X.
Select the device you’re setting up, and then click Manual Setup. Enter the base station password if necessary
Click AirPort in the toolbar, and then click Wireless.
Choose a new channel from the Channel pop-up menu.
Carolyn -
HELP, new ipod shuts down computer in the middle of updating.........
We have a new ipod, that when I connect to our computer, begins the downloading process but shuts down our whole system half way through. Anybody know what is happening. I have tried everything I know how to do, but this only happens when I connect the new ipod. I've even exchanged the ipod, but the same result. I've tried to reinstall the software, but I think I've got a mess now. Any ideas?
First do some scanning. Scan the system with your antivirus program. Scan the system with a malware program like ewido http://www.ewido.com. Use windows chkdsk to scan the system and the registry (if you need help with this just say so)
Goto the PC makers site and install all the updates for your system, especailly BIOs Chipset IDE controller and USB updates. -
My new iphone froze while verifying my e-mail address...it will not shut down...help?!
my new iphone froze while varifying my e-mail address. It will not just down or do anything...did i get a lemon?
please help!?I tried ti shut down and The...: Apple Support Communities
-
MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it. -
I-PHONE 4 FROZE AFTER AN UPDATE, WILL NOT SHUT DOWN AND SENDS ALL CALLS TO VOICEMAIL, IS THERE ANYTHING I CAN DO?
Unplug it and let unit go dead. Then hold your Home button down and plug the USB power cord back in. iTunes should see it and then restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I have iTunes on my Dell Vista 64 bit and while trying to burn a book to cd it keeps telling me to insert a blank cd when I have done that already. What do I need to do to get it to recognize a blank cd and continue with the burn?
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Dell Inc. Inspiron 5721
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002FB7200B6E2500
Current user is not an administrator.
The current local date and time is 2014-01-01 16:14:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D: PLDS DVD+/-RW DU, Rev
Audio CD in drive.
Found 15 songs on CD, playing time 55:35 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:13:47
Track 3, start time 07:40:44
Track 4, start time 11:32:54
Track 5, start time 14:33:34
Track 6, start time 18:24:06
Track 7, start time 22:00:28
Track 8, start time 25:36:27
Track 9, start time 28:47:47
Track 10, start time 32:56:24
Track 11, start time 37:07:54
Track 12, start time 40:11:29
Track 13, start time 45:02:62
Track 14, start time 48:42:65
Track 15, start time 51:56:11
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D: PLDS DVD+/-RW DU on CDR media at speed 24X. -
Mac Book Pro (OS 10.4.11) WILL NOT SHUT DOWN UNLESS FORCED! STILL PERSISTS!
My Mac Book Pro 15", 2.33 GHz, 3 GB memory - runninfg Mac OS X 10.4.11 WILL NOT SHUT DOWN UNLESS FORCED! HELP!!!
When I use the SHUT DOWN command in the Apple Menu - programs close, the screen goes to a blue screen with a revolving time indicator and then remains that way until I FORCE SHUT DOWN by pressing the power button - then after a it makes the sound the screen goes black.
I searched the forums and tried the suggested fixes: trashing these 2 .plist preferences and reboot.
Reset your Energy Saver preferences.
HD > Library > Preferences > SystemConfiguration > com.apple.PowerManagement.plist
User > Library > Preferences > com.apple.systemuiserver.plist
this worked for a couple of cycles then the problem retuned/
Hey, Mac geniuses and wizards - what is going wrong with my macbooHave you ever waited and let it do it's thing? I was ready to force mine to quit the other day after waiting 2-3 minutes, and all of sudden, it shut down. I restarted it and then shut it down again. This time it was normal.
Try this yet before doing an Archive and Install.
1. Boot from your system CD, run Disk First Aid from your Disk Utility and repair your permissions.
2. Use a utility like Onyx to clean your system cache out, including your kernel cache. The computer will restart slow right after that, but I keep rebooting the computer about 3 times in a row, and I'm back up to speed.
-Bmer
Mac Owners Support Group - Join us @ MacOSG.com
Mac611 Mobile Mac Support - about.Mac611.com
iTunes:MacOSG Podcast | YouTube.MacOSG.com
An Apple User Group
Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.' -
Macbook pro wont shut down without holding the power button nor cycle for updates to restart.
macbook pro wont shut down without holding the power button nor cycle for updates to restart
Sorry I said sorta wrong. I can shut down and I can update to the point of restart but it just sat for 45 minutes after an update. It goes through the update and to restart then the bars chase each other in a circle and it never restarts. So I hit the power button and go through normal reboot but loosing the update in the process. It does not matter how long I wait for a natural reboot after an update or click to restart it will chase the little bar in circles all day literally and never reboot.
-
I have been edited a project for weeks. Today, a few minutes after opening the project to work on it again, my computer shut down abnormally. The timeline disappeared. All the media is still in the project but my edited timeline is gone. Please help!
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
My safari,4.1.3 on the bottom says cancelled opening page. have cleared the cache,and reset but it still does it on some pages,not all. Any ideas
It's possible that the pages you are attempting to open simply won't work with that old web browser.
If you're using Mac OS X Tiger, update to the latest version, which is 10.4.11. (You might be using that already. Your profile says you're running 10.4.1, but I bet that's just a typo.)
Then get the latest version of Safari that will run on Tiger. (And... you have that already: 4.1.3.)
You might try a more modern browser designed specifically for your current OS. That would be TenFourFox.
Information on TenFourFox:
http://en.wikipedia.org/wiki/TenFourFox
Download TenFourFox here:
http://www.floodgap.com/software/tenfourfox/ -
how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my back up the operating system was ios 6.1.2..
Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?
Maybe you are looking for
-
How do I save documents in 2009 Pages for my new IMac
I have a new 10.10.2 iMac and cannot open saved documents from older version of pages. Is there a way to convert them?
-
Everytime I open a new tab, the firefox window gets smaller and smaller.
Every since I updated my Firefox, I have had issues. I love firefox so I would like to have this fixed please :) Well, everytime I open a new window or tab, the Firefox window gets smaller. Kind of like I hit the button by the close screen button. I
-
Paging, MemoryMappedFile and GC fun
I have 16GB of data collecting in memory, in a 64-bit c# project using MemoryMappedFile. The data arrives from a network connection on quite a quick transport (a good chunk of data arriving every 200ms), and I write it into a view of that memory ma
-
Imported files not appearing in multitrack view
I'm using Audition 3.0. Someone else used my computer and I believe they changed a default setting. When I import an audio file it only opens in the edit view. When I try to import into the multitrack view the file doesn't appear in the file panel (
-
Suddenly, I am unable to send email
Suddenly, I am unable to send email from my iPhone