HT4060 For some reason my iPad wont charge at all I'm using the same charger I use on my other iPad n it still won't work
For some reason my iPad wont charge at all I'm using the same charger I use on my other iPad n it still won't work
Try giving it a reset. Hold down the sleep and home keys, past when you see the red power down slider and until you see the silver apple. Let it reboot and try again.
But if that charger works just fine with your other iPad and not this one, I'd call up your local apple store and make an appointment so they can look at it. Usually when an iPad wont' charge (when plugged into the wall with its supplied charger) it's
Bad outlet
bad power brick
bad cable
and if the charger is working with another iPad then that rules that out and the thing left is something wrong with the 30 pin port on the iPad, or perhaps something with the battery or software that monitors the battery. ANd things like that are beyond a user fix.
On the upside if the device is still under warranty - and barring any obvious signs of abuse or neglect - then it should be covered under the warranty.
Similar Messages
-
Today for some reason my Ipad won't tether properly. The iphone says it's connected and on the Ipad next to Wi-Fi in settings shows I'm connected but at the top left of the screen there is no connection icon and I cannot load and display web pages. My Ipad is about three weeks old and I have never had this problem before. I have rebooted but this did not solve my problem.
Any ideas?iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My wife is working in London for 5 weeks & staying in digs, so we thought it would be a good idea to buy an ipad2 so we could skype each other, she could watch movies from the icloud, access skygo etc,and it wouldn't be as bulky as a laptop. All fine if you can get wifi, but for some reason her ipad cannot locate any btfon or btopenzone hotspots (or provider), IN LONDON??!! We can access them at home in a little village in Northern Ireland. Her digs have an ethernet socket, is it possible to connect her ipad to this socket via an adapter?
No. She will need to come up with an alternative way to connect. A mobile hotspot perhaps.
Finding some way to connect to these hotspots would be the ideal situation. I know that you realize that. We know nothing about what is happening, but if you can explain in some detail, maybe somebody here can help. -
for some reason i tunes wont connect to my i pod touch beause of unknown error. Does anyone know whats going on?
You seem to have a lot of #fff codes in the CSS files that obviously aren't found with the long #ffffff search term (#fff finds them)
Make sure that the match case box isn't selected on the Find bar (Ctrl+F) -
I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps. Old apple operating systems made it easy to have several folders open at one time.
Eric, thanks that works but seems like an extra added step also to do it that way. I've got to move and organize a ton of files and I'm looking for a easy way to get this done. I could also open the folder into a separate tab and then drag the tab out so it becomes an open window but thats a lot of fussing around also with extra steps. Not sure why these newer operating system seems more confusing and less user friendly than what they used to. In the past I could just click on any folder and it would open in a separate window making it really easy to copy or move files from one place to the other just by simply dragging them from one window to the other. Seems like I'm going through several extra steps now to do a simple task.
-
I need to download my Verizon bill. For some reason my account says I'm a "Member" and not the "Manager" or "Owner" so I can't download the bill. I AM THE ONLY PERSON ON THIS ACCOUNT. I AM THE ONLY PERSON WHO HAS EVER BEEN ON THIS ACCOUNT. ONLY ME. JUST ME.
Prepaid accounts don't have Account Owners/Managers, they just have Account Members (and prepaid accounts have less options regarding changes via their My Verizon account as a result).
-
For some reason Firefox is not asking if I wish to save the user name and password anymore. Please help as to why.
Your plugins list shows outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r32
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
* Make sure that you not run Firefox in [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Automatically start Firefox in a private browsing session" -
I'm on pages and for some reason this time, on a blank page, I cannot get the curser to show up. Any ideas?
I'll guess that you've opened a page layout template which does not have a text layer, therefore no cursor. You'll need to add text boxes or shapes to type in. If you just want to write a letter or similar, close the current document & then choose a blank document from the word processing section of the template chooser.
-
Where to find my Serial Number for Photoshop CS6 Extended? The program has been on my computer for at least a year now and for some reason it is now requiring my serial number to run the program. Please help!
Log in into your Adobe account and go to "My Products". You'll find a list of all the products you've ever registered with Adobe.
-
I have a new i phone and for some reason it has picked up a wrong apple ID in the App Store, its OK in ITunes how can i correct this?
The Apple ID for future purchases is in Settings>Store>Apple ID. However, apps have to be updated using the Apple ID used to originally purchase them. This can't be changed. If the App store is asking you to provide a password for a different Apple ID when you are updating apps, it's because this ID was used to purchase it originally.
-
for some reason Firefox wont start up i also have Google chrome and that works fine firefox is the only one not working please help.
The contacts that belong to your exchange accounts and your Google account will not sync with iCloud. If you want to sync these contacts with iCloud, you would need to copy them to the iCloud account and then disable contact syncing with these other accounts. (If you didn't disable contacts syncing with these accounts, you would see duplicates of these contacts on your phone -- one from the external account, and one from iCloud.) If you want to do this, do the following:
Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iPhone when prompted (any iCloud contacts will still be in iCloud).
Download the app My Contacts Backup. (If you have more than 500 contacts to transfer from your other accounts you will need the “Pro” version.) Use the app to back up the remaining contacts on your phone (from the other accounts) as a vCard attachment to an email that you send to yourself. Confirm that you have received the email before proceeding to step 3.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section), and confirm that this is set to iCloud.
Go to Settings>Mail,Contacts,Calendars…tap your each of your exchange accounts (if you have more than one listed) as well as your Gmail/Google account and turn off contacts syncing with these accounts. This will remove the contacts from these accounts from your phone.
Open the My Contacts Backup email and tap the attachment to import the contacts from these accounts back to your phone, and to iCloud. All your contacts should now be in iCloud and be visible on icloud.com. -
Ipad safari autofill still won't work :[
Hi,
Just bought me a new iPad 32gig refurbished model and am having problems with safari.it's supposed to save all my passwords on websites so I don't need to type them ever time but it just won't work.
The autofill box is on and and have even reset the iPad a few times & cleared the cache but still won't work.looking at the web it looks as if it's a bug so is there any fix yet ?...
King regards
PaulYou didn't enter the command correctly, but that doesn't matter, because it's obvious that you do have misconfigured permissions.
The procedure below will reset the permissions of a home folder in OS X 10.7.4 or later. If you're running an earlier version of 10.7, update to the latest version first. This procedure should not be used in OS X versions older than 10.7.4.
Back up all data before you begin.
Step 1
Click the Finder icon in the Dock. A Finder window will open.
Step 2
Press the following key combinations, in the order given:
Command-3
Shift-command-H
Command-I (The letter "I" as in "Info.")
The Info window of your home folder will open.
Step 3
Click the lock icon in the lower right corner and authenticate with the name and login password of an administrator on the system. If you have only one user account, you are the administrator.
Step 4
In the Sharing & Permissions section of the window, verify that you have "Read & Write" privileges. If not, use the "+" and "-" buttons in the lower left corner to make the necessary changes.
Step 5
By default, the groups "staff" and "everyone" have "Read Only" privileges. With those settings, the files at the top level of your home folder will be readable by other local users. You can change the privileges to "No Access" if you wish, but then your Public and Drop Box folders will be inaccessible to others. Most likely, you don't need to change these settings.
Step 6
If there are entries in the Sharing & Permissions list for users or groups other than "me," "staff," and "everyone," delete them.
Step 7
Click the gear icon at the bottom of the Info window and select Apply to enclosed items... from the drop-down menu. Confirm. The operation may take several minutes to complete. When it does, close the Info window. -
I'm trying to create folders for my apps but for some reason my iPad is not allowing to do so.
I have held my finger on app until the apps start to wiggle. I then try to drag the app over another app to create a folder. All that happens is the apps move location. Is there a setting that I need to find to allow me to create folders
It takes a while for you to get the "touch" down. With the app jiggling drag it directly on top of the app you want to created the folder and don't let go until the host app kind of enlarges a bit and you'll know you can let go and the app you wanted to move into the folder will stay. At that point a box will come up with a suggested folder name, which you can certainly keep or if you prefer, rename.
You can also do this on your computer in iTunes......... -
For some reason yesterday and today I can not send mail using the icloud website and help?
From some reason I can not send emails using the icloud website. Not sure why any help
Hi there tamarafromdarien,
You may find the troubleshooting steps for iCloud Mail in the article below helpful.
iCloud: Troubleshooting iCloud Mail
If you can't send mail in OS X Mail
If you receive this alert or a similar alert when sending a message from your iCloud email address in OS X Mail:
“This message could not be delivered and will remain in your Outbox until it can be delivered. The reason for the failure is: An error occurred while delivering this message via the smtp server: server name.”
In OS X Mail, choose Preferences from the Mail menu.
Click Accounts in the Preferences window.
Select your iCloud account from the list of accounts.
Click the Account Information tab.
Choose your iCloud account from the Outgoing Mail Server (SMTP) pop-up menu. Example: “Derrick Parker (iCloud)”.
Note: The Outgoing Mail Server (SMTP) menu also includes an Edit SMTP Server List command. If you choose this command, be aware that the iCloud SMTP server won't be among the servers that can be edited. This is normal.
If you're attaching a large file
Message attachments can't exceed the maximum size allowed by your email service provider or the recipient's email service provider. The maximum size varies by service provider. Try compressing the filebefore sending it, or send your message without the attachment to verify that there are no issues with sending.
-Griff W. -
Last night my laptop died and the time and date was reset. I cannot acess date and time preferences to change it and my laptop is acting really weird. My CD drive is broken so there are no options to put in a cd. Please someone help i need my laptop for school and cannot afford another.
Many system actions will misbehave, given an inaccurate date. Resetting the NVRAM and / or SMC will not fix it, and if the system has a preposterous date you may not be able to open System Preferences to correct it. This dilemma may or may not be addressed in a future OS X update.
If you cannot open System Preferences you can reset your system date and time using Terminal.
Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
Open Terminal - it is in your Utilities folder and looks like this
You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
At the prompt, you will be typing a command resembling the following:
sudo date mmddhhnnyyyy
... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 8 February 2014 then reverse the mm and dd values.
Substitute numerals in the above command according to the following:
mm = month
dd = date
hh = hour (24 hour format)
nn = minutes past the hour
yyyy = year
Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is February 8, 2014 at 9 PM your command will be the following:
sudo date 020821002014
or
sudo date 0208210014
Either one will work. If you enter nonsensical values the system will attempt to parse the entry correctly.
To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time.
Maybe you are looking for
-
ITunes won't sync music with iPod Touch (5th Gen) After 7.0.3 Update.
Hello, I am just wondering has any solutions as to what might be the problem. I have a 5th Gen iPod Touch and up until I updated it to the latest version of iOS 7.0.3 and iTunes 11.1.2.31 everything had been working fine. Now since that update no new
-
Convert Illustrator text to path and use in Motion - How?
Can someone please list in steps exactly how I would type text in Adobe Illustrator and use that as a path in Motion to animate the writing of the font used. I am trying to understand how to have text written on like handwriting, but all the descript
-
PSE10 Catalog Conversion from Windows XP to Windows 7-64
Hi, I have a catalog conversion issue when moving from Windows XP to Windows 7-64 while at the same time upgrading from PSE8 to PSE10. All my photos on the Windows XP machine were in the following folder: C:\Documents and Settings\My Name\My Docume
-
hi, can u help me how to list all the java files in a system into an open dialog box.for example when a browse button is clicked,the open dialog box should contain all java files in that system.
-
Unable to view logs in SM21 older than one day
I am unable to view any logs in SM21 older than one day. What parameters need to be checked that would cause this? Thanks!