HT4060 i connected my ipad to my macbook. it says its charging but it's still draining the battery? whats the problem?
i connected my ipad to my macbook. it says its charging but it's still draining the battery? whats the problem?
Most USB port do not supply enough current to charge the iPad.
Similar Messages
-
My mac book wont recognize my ipod. My Ipod will make the initial connected sound saying its charging but otherwise theres no way of finding the Ipod anywhere on the computer or Itunes. Please help with anyway I can get the Ipod recognized so I can download music from Itunes to my Ipod. Thanks in advance.
Hello xerxes.nashion,
It sounds like your iPod is not recognized by iTunes or your MacBook Pro. I recommend following the steps in the article below for an issue like this:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/TS1410
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I connect my iPhone to apple, and it says its charging. However it is not coming up in iTunes so i can add music? My phone and iTunes are both upgraded to the latest version. When i go on my computer, my iPhone is under devices.
Any suggestions to solve this?
Much appreciated.Hi Charlesweeks,
If you are having issues with your iPhone not being recognized in iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
how can i fix my iphone 3g if and only it displays the apple logo when it is connected to its charger but it displays nothing when the charger is removed?
Plug it into a wall outlet and leave it plugged in for approximately 20 minutes.
Then try a reset by pressing and holding the home and power buttons for 15-20 seconds.
Does the device power on at this point? If not, the battery or logic board is gone.
Take it to Apple for evaluation.
It may be worth replacing the battery, but I personally wouldn't spend the $149US for an Out of Warranty replacement on a 3+yr old device. -
Macbook pro says not charging but still the battery is charging
macbook pro says not charging but still the battery is charging
This isn't reference in any of the online support material that I've seen. Do you have a link to support this? Just curious is all.
I had a similar issue on my wife's '09 MBP. Initially I thought it was the battery seeing as it's an older machine, but we tried resetting the SMC (after a bunch of other suggestions) and that seems to have done the trick. -
My iPad says "not charging" when connected to my Mac, but it does seemo sync. What am I missing?
A lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
-
last night i was using my ipodtouch and all of a sudden it starteed to have a glitch then it said i need to connect it to itunes. so in the morning i did. when i plugged it in it said i needed to restore my ipod in order to use and get my data back from itunes when i hit retore it loaded then it said extrcting data after a few minutes a error came up and said it couldnt restore. i tried it a few more times but the same error kept coming up. now i can not use my ipod what do i do?
Seee:
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
Is there a way to prevent iTunes from starting up when connecting an iPad to my Macbook?
Is there a way to prevent iTunes from starting up when connecting an iPad to my Macbook? We use Apple Configurator and would love to be able to set up the MacBook to open Apple Configurator when we plug in an iPad.
When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.
-
I cannot export projects from GB in my MacBook into GB on my iPad3; nor can I export from IPad to my MacBook. I have tried going onto Apps update on the MacBook, but there were none available. I have read that this omission is to be corrected - can you confirm this is intended to happen, or is it already in process. While awaiting for this essential development, can you please suggest any way of transferring information either way?
spicer_the_coalman wrote:
I cannot export projects from GB in my MacBook into GB on my iPad3
http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbxtogbi
(Let the page FULLY load. The link to your answer is at the top of your screen)
spicer_the_coalman wrote:
nor can I export from IPad to my MacBook.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbitogbx
(Let the page FULLY load. The link to your answer is at the top of your screen) -
I'm trying to connect my iPad to my Samsung galaxy s by bluetooth but the ipad will pair with it but not connect and says "its not supported" does anyone know what this means and how I get it to work?
iOS devices do not have the BT profiles that support file sharing and othr general functions. See:
iOS: Supported Bluetooth profiles
Basically it support headphones, keyboards, speakers, peer-to-peer gaming -
I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!
Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device. -
My new Macbook won't connect to my wifi network - it keeps saying "password incorrect" - but I've tested it on my phone and works fine, I've checked the password I enter is correct digit for digit - what could the problem be?
you need to open the keychain access located in your utilities folder in the applications and once in the keychain on the left side click on the words system at the top and in the lower section click on passwords
next look in the striped area for any passwords that say airport network password next to kind and highlight those and hit delete on the keyboard to remove them from the keychain.
once you remove all of these airport passwords, quit the keychain
turn wifi off then back on, select your wifi network from the list and enter the password telling it to save to keychain this should resolve your issue! -
i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..
From http://support.apple.com/kb/HT4060 :
The fastest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
iPods need less power to charge them (their wall charger is half the power of the iPad's, 5W as opposed to 10W), so are more likely to charge via USB -
My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.
Hello Kierasully,
I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
Mac OS X: Gray screen appears during startup
http://support.apple.com/en-us/ts2570
Regards,
-Norm G. -
Hallo together,
I had deleted some Apps on my iPhone and iPad, but they are still in the Cloud. My First iPhone was a 2, my Second a 4S and now I use a 5. With the 2 I had used a different Apple-ID, but I put some Apps via Backup from one Apple-ID to another. As I get a Message by furtherly Backups, that some Apps are not can be saved because the Apple-ID is no longer on that PC registred, I had deleted this Apps to get they new for the actually Apple-ID. But I'm not shure, when I install them now, that they are working under the correct Apple-ID.
Any Ideas to solve the Probs ?Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
You cannot Delete from your Purchase history... But... you can Hide...
iTunes Store > http://support.apple.com/kb/HT4919
Note:
iCloud only Stores a Link to your Apps...
Maybe you are looking for
-
Odd Mighty Mouse behavior?
Hi, I have a brand new 24" imac with nvidia 8800 but my Wireless mighty mouse has started acting strange, jumping over the screen and making it impossible to use. I tried a wired mighty mouse and that's the same. I first noticed it after 10.3.5 upgra
-
DispatcherTimer doesn't seem to work with milliseconds.
using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading.Tasks; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.I
-
Cloak (hide) URL links in PDF
Is there a way to cloak or hide the URL links within my PDF's? Or to prevent the MouseOver from displaying the URL link? Basically, I have a URL link within a sample version of a PDF that takes a potential customer to a payment page to buy the full v
-
Hi, I purchased a bunch of music from istore, no problem. Downloaded them to my iPod nano, no problem. I logged in and hooked up my iPod today and received this message: "Some of the songs in the iTunes Music Library, including the song "my own two h
-
I'm using PostalSoft Business Edition v. 8.00c.03.01 and want the Intelligent Mail Information screen to default to "Standard: No Address Corrections w/o Confirm (code 300)" as the Service Type (right now it defaults to "Standard: No Address Correcti