HT4060 My iPad needs recharging. I plug in the charge cable in what I think is the recharging slot. I cannot find anything in any of the literature on the website that identifies the charging slot but the plug seems to fit! But it won't charge.
My iPad needs recharging. I plug in the charge cable in what I think is the recharging slot. I cannot find anything in any of the literature or on the website that identifies the charging slot but the plug seems to fit! But it won't charge.
Ther does seem to be quite a lot of comments about this issue
It seems the charger is a little slow and takes upto 4 hours to charge
closing all apps and leave the ipod in standby seems to off the best charging experience
I hope the Photo helps
In my view apple should have included a better charger for the price, the new 12w adaptor will reduce the charge time and resolve you problem, however its about $15
http://store.apple.com/uk/product/MD836B/A/apple-12w-usb-power-adapter?fnode=3c# overview
Similar Messages
-
Hi all. When i try open illustrator cs6 i get the following message: to open illustrator cs6 you need to install the legacy java se 6 runtime. This started after i upgraded my mac to yosemite. I tried looking on java site but cannot find anything. Any suggestions?
Justin,
In addition to what mo said, some have found that the page with the direct download link,
http://support.apple.com/kb/DL1572
may turn up blank to start with, so it may be necessary to reload the page. -
'My system is Windows 7 and Firefox ädvised me that it was unable to replace any of my plugs ins or software associated with my games and Java updates. Firefox should NOT be able to do this just because I updated.
Try using http://ninite.com/java/ninite.exe to install Java. Please note that even though you download it you have to double click it to get it to run and install.
-
I have an iPad 3 GB - do I need a special charger for this older model? The charger for a newer iPad seems to fit, but I do not get any kind of display that it is charging.
Did you try another cable?
If you are using a USB to iPad dock connector (older iPads do not use the newer Lightning connector) then
The Dock connector or the USB cable may be bad. -
I just upgraded my iPad from 4.3.3 to the newest - I think 6.1.3. I cannot find my photos and videos. I tried a restore, but after 3 hours, it's timing out. Pardon my ignorance on asking this question; but is there a way to find my photos? I do nto care about anythign else.
Here are the steps I though I took this morning:
Backup iPad
Connect to iTunes and downlaod newest version of iTunes and then newest iOS
restart Vista Laptop
upgrade to newest iOS
I knew somethign was wrong when it took about 6 hours to upgrade the iPad
at the end it errored with this message error (-50), but the upgrade worked
I was expecting to see all my photos but didn't see them
I have tried a restore to a back up 2 times. The first time took 3 hours and just sort of timed out - it kept saying that there was an hour to go
I tried it again 2 hours ago and same message.
They are very valuable to me and so now I am panicking
Your help is much appreciatedHi Eric Ferguson,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Best of luck,
Mario -
I found a iPad Mini and would like to return it to the original owner. I believe it was previously stolen and it cannot be activated. Any idea how I can get it back to the original owner?
I am very disappointed (yet I somewhat understand) Apple and how they completely have no interest in helping return lost items. I don't believe the person who traded me this was from around here so I don't even know where to begin. I seen on ebay you can sell them for parts but I don't really believe in doing that and would like to at least try my best to get it back to whom it belongs to. I will be contacting my local police department regarding this but I don't think they will be able to do much if it was stolen from somewhere else. However if nobody claims it in 90 days and I have a letter from my local police station saying I am the new owner, will that be enough for apple to unhold their policy of proving the item belongs to you?
-
I have purchases the OS X Mountain Lion on Apr 7 and it keep telling me to download I have gone though this 5 time. That i'm i doing wrong. it say it is installed But when i go to back to where my apps are it say to download and that is the only one that as it on there..Can you help..
The Mt Lion installer deletes itself from your Apps folder when it has finished the installation. It is available to download again should you ever need it, such as to install on one of your other qualifying Macs. You don't have to continue to download it and install, it's installed.
Is there something else going on? -
Purchased songs in the past then recently purchasd new songs, but the new purchases replaced all of my old purchases. How can I retrieve my old purchases? Cannot find them in any of my playlists.
If you purchased all of the songs through itunes store, please follow these steps:
1. Open up Itunes and Click on Itunes Store
2. Once you're in the Itunes Store look to right side of the screen and you should see the word "purchased". Click purchased and you'll be sent to a purchase screen.
3. Click on "All Songs" and then it will show all the songs you've downloaded. From there you just hit the button that looks like a cloud with an arrow on it, and it will download all the songs all over again. -
My iPod touch screen says it is disabled. Connect to iTunes. When I connect the device to the computer a window pops up and said that the iPod is locked and I need to enter the passcode on the iPod..... I can't get it to do anything. Any ideas?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Hi, my iphoto had a transparent ? mark on it and wouldn't open so I dragged it onto the desk top and now it has disappeared... I cannot find it anywhere in my finder, it seems to be gone, please help!
You have one and possibly two problems.
First problem you tried to open the iPhoto library with iTunes and appeared to have set iTunes as the default app for iPhoto Libraries. That isn;t going to work.
To fix that select the iPhoto library in the Finder and do a File->Get Info. In the middle of the Info window you'll see Open With dropbox. Click on that and select iPhoto, then select the Change All button
This will get iPhoto back as the default app to open iPhoto Libraries.
Double click the library now and if nothing else is wrong iPhoto will open the library. If it does do as Michael wrote and go to the Applications folder and drag iPhoto to the dock to remake the shortcut.
However since you started this thread by saying that the iPhoto shortcut in the dock had a question mark on it it is possible that iPhoto is missing from your Applications folder. If it is post back.
regards -
I cannot find a way to authorize my new computer to play previously purchased music from itunes. The directions say to click on STORE menu, but I don't see that option.
Go to the Store menu item on the menu bar, and choose Authorize This Computer, as shown below.
If by any chance you don't see the menu bar (File, Edit, View, Controls, Store, Help), first enable it by using CTRL+B. -
I have a shares dealing account and the keychain account number seems to take over the stock codes I input meaning I cannot deal in shares any more. How do I turn that off?
should I just cry uncle and go to the local genius bar for instructions lol
-
Is there any way to set a password so that txt messages only open when the password is entered
Is there any way to set a password so that txt messages only open when the password is entered?
Please help! Thanks for reading:)Hello Damien,
There is an option to set a passcode for the entire iPhone. You can use the following steps to set this up:
You can configure a passcode for your iPhone, iPad, or iPod touch using Settings > General > Passcode Lock.
Once enabled, you will be prompted for the passcode whenever you:
Turn on or restart the device
Wake the device
Unlock the screen
Note: You can specify the amount of time the screen must be locked before requiring a passcode.
You can find the full article here:
iOS: Understanding passcodes
http://support.apple.com/kb/ht4113
Thank you for using Apple Support Communities.
Best,
Sheila M. -
My Wi-fi on/off button in setting has stopped working and I can't even attempt to find anything does anyone know how I can fix it?? I've already reset the phone setting, network and factory settings
can you see the wi-fi address in the about? if it show N/A, your iphone needs to be repaired.
if your ios is 5.1.1 or you can see the wi-fi address,you could try to connect your iphone to the itunes to restore and update. -
My screen shows a USB cable pointing to the ITunes icon. What is my next step? I can't do anything from there on.
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom
Maybe you are looking for
-
How do I burn a few of my photos to a cd from Photoshop Elements 11 organiser?
-
About four years ago I set the volume lock on my ipod to half way up. To do that, you enter a four number code. I decided to change the code one day, and then ever since then i can not remember the code. I would like to remove my volume lock from hal
-
Screen exit for VL01 in ECC 6.0 using badi's
Hi All, I got a requirement to create a new tab in VL01 transaction where i need to create one field in ECC 6.0. Can anyone tell me the complete procedure to create a new sub screen and adding it to the existing standard sap screen as a new tab in EC
-
Adobe Reader 11 - How do I stop the "To help protect your security" in IE8
I am trying to find a way to automatically open PDF from links inside IE8 without having to allow the download for each PDF. If I add a site to Trusted Zone this does not pose an issue, this is however not a viable option as we have 17000 PCs and wh
-
Gross Wt & Net Wt not copied from delivery to invoice in batch split
Hi Frnds, We are appling a manual Header Frieght condition Type (HD00) to a delivery with batch split. In the delivery this value(HD00) is splitted between line items based on Gross weight. But when we create the invoice for this delivery, the batch