HT4060 My ipad2 is not responding for itunes

hi there ... my ipad2 is not responding for itunes and it can  not switch off even with the sleep and on keys ... its been a year so no warranty on it. is there any way i can resolve the problem ?? pls.
- Jagan Aiyappa.
(Dublin)
<Email Edited By Host>

Hello jaganaiyappa,
Thank you for providing the details of the issue you are experiencing with your iPad.
I recommend following these steps for an issue like the one you described:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on),reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
You can find the full article here:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If you get to step 5, I recommend backing up your iPad before performing the restore:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Additionally, if your iPad is not being recognized in iTunes, I recommend the following article.  I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • IPad2 screen not responding, doing factory reset, but....

    My iPad2 was not responding to touch.  I tried to 'reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.'.  That did not work. Next step: Tried to do a factory reset by hooking it up to my Windows laptop using Itunes.  Unfortunately, it needed me to answer questions using the iPad2 ..... which is not responding to touch.   So I guess I now have a friendly iPad2 that is dedicated to greeting  me in 6 different languages.
    Any suggestions would be most  welcome.
    Thanks.

    Hi melindamay,
    Thanks for visiting Apple Support Communities.
    It sounds like your iPad 2 is not responding to touch, and you've already tried resetting it and restoring with iTunes.
    If you're not able to restore the iPad using iTunes, you may want to try restoring the device while it is in recovery mode:
    To put your device into recovery mode, follow these steps:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes.
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.
    You can find these steps here:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Additionally, the support article If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch suggests contacting Apple or an Authorized Service Provider if your touchscreen is unresponsive and the device can't be restored:
    If your touchscreen still doesn't respond like it should, contact Apple Support or take your device to an Apple Retail Store or Apple Authorized Service Provider.
    Best Regards,
    Jeremy

  • I cann't turn the zoom of in my iphone. It does not respond for three fingers tapping. and it hard to chose the icons and options because of this problem

    i cann't turn the zoom off in my iphone. It does not respond for three fingers tapping.
    and it is hard to chose the icons and options because of this problem
    what can i do.

    Hi osh17,
    Thanks for using Apple Support Communities.  You can turn off Accessibility features using a computer as well.  That may be easier to do if Zoom is causing difficulty in using your device:
    iTunes 11 for Windows: Accessibility features for iPod, iPhone, and iPad
    http://support.apple.com/kb/PH12326
    iTunes 11 for Mac: Accessibility features for iPod, iPhone, and iPad
    http://support.apple.com/kb/PH12126
    Cheers,
    - Ari

  • TS3274 My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response.  Any ideas as to what may be wrong and what I can do?

    My ipad2 is not responding..I want to restart it but i can get nothing but a black screen with only the apple logo and a small gear icon. It occasionally beeps but no other response.  Any ideas as to what may be wrong and what I can do?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPad fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Ipad2 could not connect to itunes after i restore

    ipad2 could not connect to itunes after i restore(newest iO7)

    Help in here.
    iOS: Device not recognized in iTunes for Windows
    Or in here.
    iOS: Device not recognized in iTunes for OS X - Apple Support
    Mac OS X v10.6: iOS device not recognized in iTunes after ...

  • Overdrive Media Console/iPhone Problem Resolved-"iTunes is not responding, bring iTunes to the front and check status.

    I could not download books from Overdrive Media Console from my iMac desktop. I realized if I turned off iTunes Match in my iphone, it fixed the problem. On your iphone...Go to "Setting", scroll down to "Music" and turn off iTunes Match. i Tunes match is a music subscription service that I had purchased a few weeks ago. I could not figure out when I tried to download audiobooks from Overdrive I got the following message "iTunes is not responding, bring iTunes to the front and check status". Problem solved. I hope this helps others who are experiencing the same problem!

    I'm assuming you are talking about audiobooks and if so, just download all the parts in overdrive media console then locate them in your finder. Go into Itunes and go File > Add new files to Library. Go select all the mp3s and upload them onto your library. Sync your iPhone with it and that is what has worked for me Hope this helps!

  • HT201413 iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

    iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

    Mikey, I have the exact same problem. Dropped my 3gs on Thanksgiving, phone was not responsive, plugged into the wall charger, went to grey iPhone restore screen, then said to connect to itunes. So I plugged it into itunes but itunes wont recognize it nor will my computer. I searched the internet for hours with no success. I tried to change USB ports and cords, tired removing the SIM card, reinstalled itunes, everything. When I put it in DFU mode itunes recognizes an iphone in recovery mode, so I click restore and update, then I get error 1602 every time. My iPhone also loses power when I unplug it from the wall. I do not know what to try next. You are the only person I have found with the same exact problem I have. I will update you if I find a way to get my phone working again and I hope you will do the same. I'm very frustrated

  • Suddenly my ipad2 is not responding,

    Suddenly my ipad2 is not responding, not even can put in my pass code!! No response to touch. I reboot by holding 2 button several times. no luck please help, i also have apple extended guarantee. many thanks

    Restore the device using iTunes. If you are unable to enter the passcode, you may need to restore in Recovery Mode, explained here:
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/unable-to -restore
    (Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple)

  • IPod Touch will not power up and will not respond to itunes when plugged into a computer

    iPod Touch will not power up and will not respond to itunes when plugged to computer, have tried holding both buttons down for 10 secs like support suggest but nothing has happen. Any suggestions?

    Try the other actions here:
    iOS: Not responding or does not turn on

  • When i want to go another from a tab,it shows firefox not responding, for a while then opens that tab!this is embarrassing me a lot by taking so much time!!why

    I have two inconviniences with fire fox..
    1)when i want to go another from a tab,it shows firefox not responding, for a while then opens that tab!this is embarrassing me a lot by taking so much time!!why it happens?
    2) every time when adobe flash player is updated, it shows flash player can't be installed and it crashes! it says 'disable real player' though i never installed real player!!
    plz Let me know why it happens to me????

    1. Update firefox to the latest version 2. and disable real player in menu->addons->plugins.
    Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox 13 are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
    In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
    [[Flash Plugin - Keep it up to date and troubleshoot problems]]
    [[Flash 11.3 crashes]]
    [[Flash 11.3 doesn't load video in Firefox]]
    Other, more technical information about these issues can be found under these Links:
    http://forums.adobe.com/thread/1018071?tstart=0
    http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
    Please tell us if this helped!
    Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
    Once you're there, the site will check if all your plugins have the latest versions.
    If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
    To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

  • When trying to print, adobe reader 11.0.07 keeps "Not responding" for 2 - 5 minutes before finally working? I have tried uninstalling and re-installing but same problem. What is going on? I have windows 7

    When trying to print, adobe reader 11.0.07 keeps "Not responding" for 2 - 5 minutes before finally working? I have tried uninstalling and re-installing but same problem. What is going on? I have windows 7

    First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

  • My ipad2 will not play my iTunes video that i just purchased; i've deleted and reloaded, but they still won't play, only the music

    My ipad2 will not play my itunes videos that i just purchased; I've deleted and reloaded them twice, but still won't play; plays music only, any suggestions?

    You are playing them in the Videos app correct? Music Videos will play the video in the videos app, not in the Music app.

  • Illustrator 25% off the time "program not responding" for 35 seconds when network is active

    Hi
    My Client have 4 computers, all win7, running cs 5 or 6, the newest the cloudbased version.
    The problem has been sinc upgrading from cs3.
    "Program not responding" for 35 seconds, before loading the file on 1/4 of time.
    It is not on specific files, and no patton.
    it does'nt matter if the files are on network or saved local on Harddrive.
    the sice does'nt matter.
    Only switching of nic and wifi stops the problem.
    I did try downloading other files (not made by my client), from the net, they do not trigger the problem.
    What else then the Files can bee the problem? can anyone test my files to see what is wrong?
    BG Allan Tjepp

    I have a very similar problem with my CS6 Ai on our company network. I sometimes use Illustrator for image heavy documents less than 10 pages. These have a lot of placed images.
    It will freeze, say "not responding" and curser switches to blue spinner. Then about 15 sec later it unfreezes and I can work for another 60 sec or so, then repeat freeze, blue spinner, etc. Very annoying. When i unplug the network LAN cable the problem goes away and I sail along. I have tried relocating the Ai file to my desktop (not sure about the images).
    Waiting on any feedback or help, our IS guys are getting stumped. I could switch to InDesign for this work but not my preference.

  • Firefox keeps "not responding" for a few seconds - then connects

    I just upgraded to Firfox 4.0 because of my new computer's Windows 7.
    It started "not responding" for up to 20 - 30 seconds before it reconnects, and it is sometimes unresponsive to my mouse even when it is working. This did not happen before the upgrade and does not happen with Windows Internet Explorer

    check your system preferences to see if you have "ignore accidental trackpad touches" checked (or something like that). If you type on you keyboard then try to use the trackpad you have to touch it a couple of times so the computer does not think it was an accident while typing. Just uncheck the box if it is checked.

  • In my iphone6, voice over got switched on and screen got locked. Phone is not responding for slide but only responding for double tap. Phone is not accepting my passcode as I double tap in passcode screen. Single tap just gives a voice over. pls help

    In my iphone6, voice over got switched on and screen got locked. Phone is not responding for slide but only responding for double tap. Phone is not accepting my passcode as I double tap in passcode screen. Single tap just gives a voice over. pls help me to unlock the screen and switch off voice over

    Thanks a lot Sted !! It worked

Maybe you are looking for

  • Best Practice: JavaFX pattern for "Catching all Exceptions"

    Hi, what is on the current JavaFX Standard the best way to catch all Exceptions (centralized) within my JavaFX application... I read thread outside this Oracle Forum who recommend following: 1. Thread.setDefaultUncaughtExceptionHandler(new MyExceptio

  • Input hierarchy  variable is not working

    Hi, i have created a BI quary which have a manual input hierarchy variable.Now i have created a Universe on it,and then Qaaws. In Qaaws this varibale working fine,its gives proper result aCcording to selection of node.Then i have used this in Xcelsiu

  • [Q]: How to put MatLab 5.2 code (*.m) in LabVIEW 5 ?

    Hi, Is there somebody who know if it is possible (and how) to put MatLab 5.2 code (*.m) in LabVIEW 5.0 ? I use LabVIEW for my Audio sound and graphical Interface and I use MatLab for sound mathematic calculation.... Thanks in advance. Best regards.

  • Spinning ball during cut and paste?

    Any ideas on why I am finding Numbers so slow. Whenever I try and copy and paste data from one cell to another I get the spinning beachball of death. I am working to my laptops harddrive and have no physical disks attached. Double clicking a cell can

  • Excluding songs from Party Shuffle

    I have a lot of classical and jazz on my iPod. I like to listen to that in isolation but not in shuffle. How do I exclude genres from the random selection used when party shuffle lists are created?