HT4061 Hello, my name is shyanne dean i made an appointment for may 3rd for 10:20 AM at the apple store in santa Barbara Ca On State Street. i am not sure if it is final and then drive an hour to get there and not get help. my phone will not charge
Hello,
My name is shyanne dean and i have made an appt. with the apple store in santa barbara Ca and i need to know if i am not wasting my time going. my phone will not charge i have tried multiple chargers and it is now dead and no of the other chargers are working. can you help me
yea it sounds like a hardware issue, going to apple would be your best option
Similar Messages
-
Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off. Please help.
Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.
-
Just downloaded 7.2 into my Iphone 5 what a mess. Dropped called no audible notifications for email or text messages. Went to the apple store and reset phone to original specs. Now trying to restore apps and music and itunes will not recognize the phone. I have gone thur the steps for windows 7 and still nothing??? I have downloaded the newest version I itunes too.
Hi Midwestboy,
If your iPhone isn't being recognized by iTunes on your Windows machine, you may find the following article helpful:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Regards,
- Brenden -
I bought an iPhone 5 from the Apple store with a new Sprint contract in Sept. 2012. I would like to know if I port my number to T-mobile and pay off my Early Termination fee with Sprint, will my iPhone 5 will be unlocked to use with T-mobile network?
As Ethmoid says, it is still a CDMA phone as I told you earlier, and it will not work with t-mobile. Even if Sprint unlocked the phone, it would only unlock the GSM side for international use. They will not unlock the GSM side for domestic use in the US.
-
If i purchased a OWC SSD Drive for my mac could i take it into the apple store to install?
You can give it a try, but I doubt that the Apple Retail Store will install it.
Make sure you bought an OWC Aura Pro SSD and not a normal SSD. The first one is flash storage and the second one is flash storage but in an enclosure, and the second one does not fit inside the MacBook Air -
My husband needs a new power cord for his Mac Pro. I went to the apple store and the clerk gave me a power adapter by mistake. He has a conference call before the store opens and I can't get him another power cord. Is there a way to power up his computer?
You posted in the MacBookPro forum. Is this a Mac Pro or MacBook Pro? If it's the latter, it has a battery.
-
When I set up my Macs, there were 2 sign-up names - 1 I created and the other was "Ghost". The Apple store says that takes up 50% of my hard drive. Can I kill "Ghost"? Do I just delete it?
Thanks for your help!Hello Blisshous,
It sounds like you have a user account named Ghost, that you want to delete all content from and remove from the computer. This article will help you do that named:
OS X Lion: Delete a user account
http://support.apple.com/kb/PH3867
Choose Apple menu > System Preferences, and then click Users & Groups or click Parental Controls.
Click the lock icon to unlock it, and then type an administrator name and password.
Select the user account you want to delete, and then click Delete below the account list.
Do one of the following:
Select “Save the home folder in a disk image” to save the folder as a disk image in /Users/Deleted Users/.
Select “Don’t change the home folder” to leave the home folder in /Users/.
Select “Delete the home folder” to remove it from the computer. If you want to prevent programs that read raw data from retrieving any files, select “Erase home folder securely.”
Click OK.
Keep in mind, if you remove the user and delete the data, without Time Machine you will not be able to restore any data from it in the future.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Hello, my name is brad and I recently had a voicemail app that I was using and now i got rid of it. But now my voicemail for the phone will not work. I tried to reset the network settings and nothing happened. I was wondering if you could help me out?
When you set up a voicemail redirection, usually you have to remove that redirection from the account that redirected it. Like Google Voice, if you activate Google Voice to receive your voicemail, you will have to log into voice.google.com to turn it off. If you contact your carrier, they can tell you exactly what program has taken over your voicemail functionality just in case you are stuck, but if you know the name of that App, I'm sure you will be able to figure it out. Hope this helps you out.
-
Hello I'd like to know how to walk redo my iMessage on my ipod touch 4th . I connect and then says to choose an email address and it says < Check> and this is the me that his brings back on the menu. So please help me!
You can try
FaceTime, Game Center, Messages: Troubleshooting sign in issues
However, some other users have reported that did not work. No real solution has been posted here yet -
i replaced my hard drive and then tried to reinstall adobe creative suite and it tells me that the serial number is invalid, what do i need to do?
You will need to contact Adobe directly:
Contact Customer Care
What version? -
Good Morning,
I just did a software update on my phone (finally) last night and now my phone will not come on. It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYONE help me please???The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.
-
The hard drive on my MacBookPro recently crashed. The Apple store replaced it. Since then I can't open iphoto. It asks to rebuild library; when I click yes, I get: "Aperture cannot access this library; reset permissions." I don't own Aperture! Any thoughts on how I can rebuild the iphoto library? Currently I can't even get into it.
Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?
If you tried to restore to your iCloud backup and your photos didn't fully restore, first go to Settings>iCloud>Storage & Backup and make sure it isn't still in the process of restoring.
If the restore is complete and all your photos weren't restored, all you can do is try restoring the backup again. You might try the solution posted by ezjules in this discussion: https://discussions.apple.com/message/19518589#19518589. This involves opening the photos app after the phone restarts and you provide the passwords for your Apple IDs, then leaving it open for the remainder of the restore process. -
I downloaded the IOS7 and I recently started seeing that every tim I revived a message everyone would be able to see it, I tired looking for the I'm not sure what to call it in messages, where no one can read my messages unless I open my phone. Any help? I really don't want anyone ready what I get from other people, its emrassing, when I get a text from someone and it's personal, and someone could go look at my phone while its charging and read the message. Please help!!!! How do I disable it, If I can.
Hello KenyaJohn,
You may benefit from disabling Show on Lock Screen for Messages and Mail in Settings -> Notification Center -> Mail/Messages.
You can disable Show on Lock Screen for a particular app in Settings > Notification Center > <app name>.
iOS: Understanding notifications
http://support.apple.com/kb/HT3576
Cheers,
Allen -
My iCal is driving me nuts.
It won't sit still when I am looking at my calender. I try holding it still with one finger, two fingers and it just moves. It jumps to random dates and I have no confidence in it any longer. I use my calendar all the time and this just isn't good enough.
I have gone into the apple store and they said they hadn't seen that before. It did it while I was there. They restored the phone and it didn't make any difference.
I have turned the calendar off in settings - mail - icloud - deleted and then turned back on again. It didn't help.
I put the Google Calendar app on in the hopes I would have a calendar that wouldn't frustrate me and it is so slow in responding, I have deleted it.
I see online that many others are having the same problem with their iCal.
It would be great to know the solution.
Please helpHey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine
Maybe you are looking for
-
Subtract sum of two columns in two different tables and display balance for each row
Hello Friends, I have the below 5 tables 1. STUDENT (STUDENT_ID, NAME) 2. DEPARTMENT (DEPT_ID, NAME, CONTACT_PERSON, PHONE) 3. SECTION (SECTION_ID,SNAME,DEPT_ID,Acad_LEVEL,SHIFT,TIME,ROOM) 4. TUITION_BILL (Seq_No, STUDENT_ID, DEPT_ID, Acad_Level,
-
Hi We maintain Business Area as a compulsory field for document splitting. Now when we are trying to post a Cash expense txn which is split across two Business Area , system is giving an error "Business Area in Line Item 001 not filled." Pls suggest
-
Customer Payment Discounts beyond 2 levels
All, We are currently using "standard" discount successfully for our customer payments. We recently purchased a new business with discounts that are outside the norm for SAP. Example: Payment in 30 days 5.6% discount Payment between 31 - 60 days
-
Help! What happened to my menu bar?
My old imac has been getting sluggish. Today I turned it on and all the right hand side items on my menu bar are gone, including the clock, airport settings, volume, all of it *pffft*. I immediately hit restart, no changes but it was very sloooow.
-
How to store XML manaul in Database
Hi, I have to store and retrieve XML manual in database.My XML manual has more than 100 tags and also un-strcutured(Document-centric manual). I tried with(XSU). If i use XSU, i need to create the table which has element name as column name. That is n