HT4061 Hi, I did an IOS update last week and when the ipad rebooted it is asking me for a passcode ... i have never entered a passcode originally so dont know what passcode to input to open my ipad... it just locks me out... help what do i do ??

I need help :-(
Did an IOS update last week and after the Ipad rebooted it said slide to unlock then asked for a passcode to be entered..... I have never set a passcode ever ??
What number do I enter to unlock the Ipad ... have tried the usual 0000 and 9999 etc but just locks me out .... HELP  !!!
Or is there a way to go back to factory settings ?? (Without losing my Apple ID etc)
Thanks

If this was your first update to iOS 7 then you were asked to CREATE a passcode. Also there would have been a small Skip button to avoid creating the passcode. If, when you encountered that request you went ahead and entered a passcode number then you must use that number to unlock your device. Once the device is unlocked you can change or delete the passcode using the Settings app.
To completely remove the passcode lock you need to connect your iPad to the computer you normally sync with and restore the iPad. This will erase all data on the iPad so be sure your info, photos, etc. are backed up first.

Similar Messages

  • To update my ipod i have to enter network settings, but i dont know what they are? I dont even know what network settings are! any help or suggestions?

    Im trying to update my old ipod touch. Unortunstely it says I have to enter newtwork settings, however I dont know what my network settings are because I dont really know what network settings even means.

    See:
    iOS: Connecting to the Internet

  • Why does safari show the last used page when the Ipad is turned on again

    Why does Safari show the last used page when the IPad is next used?

    Read this article:  Open iOS Safari to a blank page, http://www.macworld.com/article/159303/2011/04/ios_safari_blank_page.html

  • HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    See if this helps:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

  • Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my pass fail

    Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed

    The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
    If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
    http://support.apple.com/kb/HT1212

  • I am not getting my iCloud or other mail thru...I had an update last week and it quit also.  I simply turned mail off and on and it solved the problem.  Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions

    I am not getting my iCloud or other mail thru...I had an update last week and it quit also.  I simply turned mail off and on and it solved the problem.  Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions

    I am not getting my iCloud or other mail thru...I had an update last week and it quit also.  I simply turned mail off and on and it solved the problem.  Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions

  • Installed Office update last week and now Word crashes every time I use it

    Installed Office update last week and now Word quits unexpectedly every time

    Have you checked Microsoft office for mac support? http://www.microsoft.com/mac/support

  • My iPad is asking me for a restriction pass code but I have never set one so I don't know what it is. I'm trying to reset the device because I have sold it.

    My iPad is asking me for a restriction pass code but I have never set one so I don't know what it is. I'm trying to reset the device because I have sold it.

    Try erasing the device using iCloud.com - assuming that you were using iCloud and the Find my iPhone app on the device.
    What to do before selling or giving away your iPhone, iPad, or iPod ...
    if that doesn't work, try recovery mode.
    If you can't update or restore your iOS device - Support - Apple

  • IPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black.

    iPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black. What's happening ?  I show an incompatible upgrade available for OSX Maveriks, which I have not yet installed.

    What version of iPhoto are you using?  Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Hi, please can you tell me when the ipad mini 2 is coming out? i don't know whether to get the ipad mini, or wait for the 2nd generation

    hi, please can you tell me when the ipad mini 2 is coming out? i don't know whether to get the ipad mini, or wait for the 2nd generation

    Oh, ok. thanks for the help anyway

  • Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi

    Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi. I have already restored.

    This entire thing is a hair over four months old, I don't think it should be acting up this much. Plus, this problem happens only once out of every 40 or 50 times I start this thing up. It's very infrequent, but it's there, and it just bothers me, I guess.
    That said, I would try reinstalling, but I wouldn't be able to tell if it'd worked unless the problem never cropped up again in a long, long time. Sadly I also don't have access to my OSX discs at the moment (I'm out of the country).

  • HT4623 I installed iOS 7 last night and when I started the i-pad this morning, it ask for a password. I did not set a password and now my i-Pad is disabled and I can't use it, can you help?

    I up loaded iOS7 last night and when I opened my iPad this morning, I was ask for a password. The problem is, I did not set a password and when I used the 4 digits I would normally use, the i-Pad disabled and I cannot get it open. Can anyone help?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I have a Pages file that I created on my iPad that I used iCloud to store. There are no backups anywhere of this file. The file is stuck on updating on iCloud and on the iPad the file is inaccessible. There is a black bar over it which greys the file out.

    I have a Pages file that I used my iPad to create. iCloud backed this file up to its server. The problem is that my iPad somehow locked itself. I had to restore it, the file was lost on the iPad, and when I went back to iCloud to retrieve the file it said it was Updating. The file is showing on my iPad, but it is greyed out with a black bar across the bottom of it. I have been working on this file for months, and I am not about to lose it! Please can someone tell me how I can get my file to download at least to my iMac.
    This file has worked perfectly in the past, and what I didn't realise when the iPad was locked down was that the Airplane Mode was on, to save battery. If that had been on it would have synced it again.
    Can anyone help me? I'm supposed to be sending this file (completed) off to a company in three days.
    Thanks

    On the iPad tap Settings > iCloud
    Toggle Documents & Data off then back on then restart your iPad.
    Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    On the iMac open System Preferences > iCloud
    Deselect the box next to Documents & Data then reselect it then restart your iMac.

  • I participated in my company's video conference last week, and now the camera on my Macbook Air will not work for facetime or skype.  Help!!

    I participated in video conference with my company last week, and now I cannot use Facetime or Skype because the camera is not working?  Help, I cannot find the button to free up my camera!! 

    If you installed some kind of software to take part in the conference, remove it.
    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
    Back up all data before making any changes.
    You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

  • HT4053 Hi on my iPad Desk Top I have the following message: 2This iPadhasn't been backed up in 2 weeks Backups happen when the iPad is plugeed    locked, and connected in, locked, and onnected to WI-fI. Tapping ok doesn't do anything

    Hi on my IPad Desk top I have the following message:
    "This iPad hasn't been backed up in 2 weeks> Backups happen when the iPad is plugged in, locked and connected to Wi-Fi. When I tap Ok nothing happens.
    The slide to unlock doesn't work wither. Can you help, please?

    Basic troubleshooting is reset, restart, restore (first from backup then as new).  Has any of this been tried?
    Just FYI, this is the iPhone forum.

Maybe you are looking for

  • How can I set the fax prefix no. on HP officejet pro 8600

    Greeting. I have a HP Officejet Pro 8600, and I want to send FAX thru this. In my office, we need to put '0' to call outside. However, there is no prefix setting menu on this device. I have another model HP 1213mf which has Prefix No. menu on it, but

  • Can't Download Songs Onto New Ipod Nano

    I have had Itunes on my computer for 1-2 years and use it with my Ipod Shuffle & my brother's Ipod Mini & have no problems. I just bought an Ipod Nano & am having trouble with it. The instruction manual I received with it does not help me @ all. I re

  • DPMS and 2.6.37 kernel: backlight off forever

    With the new kernel in the testing repo my Intel 945GM graphics chipset is affected by this kernel bug: https://bugzilla.kernel.org/show_bug.cgi?id=22672. When the screen goes in standby, there is no way to rewaken the backlight. I open this thread j

  • Wayland (+Gnome 3.14) mouse speed/acceleration

    Good evening dear archlinux community! Just recently I updated to gnome 3.14 and started using it with wayland. So far it runs pretty smooth and stable, which is nice, but I got issues with mouse speed and/or acceleration. I'm using a pretty old Raze

  • Flash Builder 4.6 mobile connetion oracle and php

    Hi everyone im new in flash builder and as far i know Flash Builder 4.6 gives you the option to create sample PHP code, but only gives an option for a MySQL database.  Does anyone have some PHP sample code for using Oracle? I try few proyect and they