HT4061 how to fix black screen. Phone still rings.
how to fix black screen. Phone still rings.
Hello TaQuilla,
If nothing ever shows on the screen when you start it, or anything you may need to reset the phone, or restore the software. Try this first:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that does not get the screen going, then backup your device, and restore it.
iOS: How to back up
http://support.apple.com/kb/ht1766
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
All the best,
Sterling
Similar Messages
-
HT4061 how to fix black screen on iphone 5
how to fix black screen on iphone 5 , can someone answer me , please !?
To solve most of iPhone os problems you can perform a soft reset which will not change anything inside the phone
It'll simply remove the errors
To do that
1.Hold power button for 5 seconds
2.without releasing power button press home button and keep both pressed till the apple logo comes up
3.Now release both buttons
Your phone has now been reset -
How ti fix black screen on i phone 3gs?
how to fix black screen on i phone 3gs
I suspected that. Well, sorry the forum forbids helping you in any way. You have to google for help.
-
How to fix black screen on your iPod touch?
My ipod touch, wont show anything. it just a black screen. I held the home button, and it tells me that i need to connect to the internet, but still have a black screen.
the day before i notice my ipod went to a blue screen and then shut off.
i tried reseting it on my intune, but it didnt do anything.If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
How to fix black screen on iPad after restoring from 4.2.1 to 4.3.3
recently i just restore my ipad from 4.2.1 to 4.3.3, suddenly it's just hang up on black screen (DFU mode i guess).
I've tried pressing home and off button for 10 sec and bla..bla....but doesn't work at all...
Googling to find another way such as use TU and others third party software..but still not bloody working at all...
After few troubleshoot done, thing goes worse and worse...
now my iTunes didn't detect my iPad at all.
Can anyone help me?PLEASEEEEE!!!!!!Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
How to fix black screen hard freeze MBP 2010?
My 2010 MBP has a lock up issue, at random times the screen goes to black, if there was sound playing it gets stuck in a loop and the keyboard lights stay on. Nothing works, and the only way out is to do a hard boot by pressing the power button. This is random, at anytime doing anything, I could just have one safari window open or one firefox window open. The only way that I can recreate the problem is by using iDVD, it will crash as soon as I have a movie ready and press the burn button. Anyone have any ideas? I have already tried resetting the SMC and nothing. The problem will always comes back. Please someone help, I am falling behind at school because of this! Thanks!
Welcome to the crowd. This problem is so wide spread, I am surprised that Apple can not fix this problem,
or if they are please inform you tech support at your Apple stores. They seem to be clueless.
I have worked with Apple computers since 1985 and have never seen anything this bad.
So I do not have any ideas of how you can fix this. I am like you, I can't afford to take my computer in and leave it for several days. So as you say, we live with it the best we can. I have come to a point that I am saving
my files every few minutes. Really effects the creative part of what we do as a New Media development company. I hope someone out there has cracked this problem. I am going to call my Apple Care support today,
and put the challenge out to them. The key is to document this problem if you do have a warranty that is still in force and Apple Care. Its hard to imagine that I have an old Macbook Pro that is more dependle than this 1 year old Macbook Pro. I hope more people get on this issue and voice their concerns and solutions.
Take care, -
How to fix black screen on boot up
When i start my iMac the computer screen stays black.. You can hear Apple chime boot up but the screen stays black... I already tried to reset a couple things but still the same.... What could be the problem?
Try these things:
> Resetting the System Management Controller (SMC)
> Resetting the NVRAM and PRAM
> Starting up in Safe Mode
Then if it is still a no go:
> Apple - Support - iMac - Service FAQ -
Phone black screen but still rings if called
my phone is on cause when someone calls it rings but i can not see display
OK. Thanks for letting us know.
Do you have a technical support question? If so, please ask, and tell us all the troubleshooting steps you've taken. -
Fixed black screen on boot, passwords not working now
After fixing black screen on boot with the advice provided by the great community. (Here: https://bbs.archlinux.org/viewtopic.php … 9#p1501989 )
I followed the method outlined in the post I reference. Booting from live USB, mounting my root home and usr partitions, arch-chrooting into the root partition and then setting modeset=0 in radeon.conf and putting radeon in MODULES in mkinitcpio.conf then running mkinitcpio -p linux. Afterwards I exited the chroot and unmounted all partitions.
This fixed the blank screen, but all of my passwords are changed. The root and my user account passwords don't work. So again I booted into hot usb, mounted partitions, arch-chrooted in, and ran passwd to change root pw and then su to get to my user account to run sudo passwd. After doing so, I exit the chroot and try to unmount the partitions. I can unmount /dev/sda2 (home) but no sda1 (root) or sda3 (usr). It says: cannot umount /mnt/arch target is busy or cannot umount /mnt/arch/usr target is busy. It suggest lsof(8) or fuser(1) but either I use them wrong or they don't help. If I just reboot at this point my passwords still don't work. Why can I not unmount usr or root partitions? It says they're busy but ps -ax shows nothing. Any ideas? If more info is needed I will promptly supply it, I want to get my arch box up and running again asap
Take care fellow archersForgot to mention when I boot into Arch normally, it does systemd-fsck on all the partitions they all pass but after checking /dev/sda2 (home) it freezes. The messages displayed are:
running hook [udev]
Triggering uevents
performing fsck on /dev/sda1 /dev/sda1 clean xxxx/xxxx files, xxxx/xxxx blocks
mounting /dev/sda1 on real root
running late hook [usr]
mounting /dev/sda3 on /usr
running cleanup hook [shutdown]
running cleanup hook [udev]
Welcome to Arch Linux!
kvm: disabled by bios
systemd-fsck[252]: /dev/sda2 clean, xxxx/xxxx files, xxxx/xxxx blocks
and it freezes here if I switch TTY's none of my passwords work.
Thanks in advance
Last edited by cshenkan (2015-03-03 04:37:00) -
How to fix white screen of death on iPod 4g after screen replacement?
How to fix white screen of death on iPod 4g after screen replacement?
I would try to reset it before anything else. To do this press and hold the home and power buttons until the the white screen shows the apple logo (~ 15 secs.).
If this does not work then more than likely the LCD is damaged.
btw- The white screen is common after repairs. The reset fix works 90% of the time.
iRefresh ltd.
http://www.ipodrefresh.com -
How to fix grey screen and spinning spiral on MacBook pro
How to fix grey screen and spinning spiral on MacBook Pro
The method described above is too complex.
I found a more easy way to solve the Modern app crash problem.
That is to download the legacy driver 296.10 here
http://www.geforce.com/drivers/beta-legacy
Unfortunately, 296.10 and 19x don't solve all problems on Windows 8:
https://discussions.apple.com/thread/4370420 -
I did not on the "Do Not Disturb", but the phone still rings.
I did not on the "Do Not Disturb", but the phone still rings.
You can use the Do Not Disturb setting while your iOS device is locked...
From Here > http://support.apple.com/kb/HT5463 -
how do i get the phone to ring when someone calls, it seems to only vibrate and I can't figure out how to turn on the ringer
look in settings:sounds and be sure you have a ring tone set, and both vibrate buttons are off. Also be sure the volume slider id as far right as is comfortable.
-
How do i keep my phone from ringing when listening to pandora?
How do I keep my phone from ringing while listening to pandora? I am a massage therapist and want to use my phone for music but even when it is on silent it rings during session!!
My wife has the same problem. I believe I found the solution. Activate "do not disturb" in settings - do not disturb - manual. Make sure to also go to allow calls from and set it to no one. A moon will appear in the status bar. You will see notifications of missed calls but it does not interrupt Pandora. Let me know if this works for you.
-
I flip on my silent switch and the phone still rings on my iphone 4....any suggestions/help is greatly appreciated
Try a Reset,
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
http://support.apple.com/kb/ht1430
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Maybe you are looking for
-
How many GBs are free in a 17" CD2 160HD when you buy it?
A 160Hd comes formatted and with the OS X installed... I'd like to know how many GBs are free to put your things there. I guess it's maybe something like 120GB? Thank you!
-
Why has the camera roll and/or stream roll been merged together?
Wwe hat happened to my stream roll? This IOS8 system is not as user friendly as IOS7 was.
-
Slideshow automatically loads / corrupted / unable to disable
In my wife's profile using iPhoto 9 (8.1.2) and running OSX 10.5.8, for sometime now after iPhoto launches whatever action she does next, a random slideshow launches and plays some default audio. The audio is garbled and sounds like a broken record.
-
How to make view disable dynamically
Hi experts, i want to view disable dynamically for this i am not using any view container,can you please suggest me. Thanks in Advance, Edited by: Lavanya YH1504 on Sep 13, 2010 7:21 AM
-
ODI11G Configuration Process Failed
Hi all, I'm using following: windows 7 database: Oracle11g. Rcu i'm using ofm_rcu_win32_11.1.1.3.3_disk1_1of1 ODI11g:ODI is ofm_odi_generic_11.1.1.3.0_disk1_1of1 Following Warnings and Errors occured while installing Warning: while installing i got t