HT4061 how to fix the iPad with screen freeze.

My iPad wont go back the screen the way it should be, it just like its freeze up the screen, could someone any idea to fix it.

Give it a reset. Hold down the sleep and home buttons for about 20 seconds or so. You should see  a black screen, then the silver apple as it reboots.

Similar Messages

  • WHEN or HOW to fix the problem with Thunderbolt/Side screen problems

    WHEN or HOW to fix the problem with Thunderbolt/Side screen problems (Cinema screen). Keeps blinking on & off then eventually completely off. Would have thought Apple would have fixed the problem by now as it is apparently to do with the Thunderbolt connector!.

    Hello, might it be Video card related?
    See if yours is on the recall list...
    iMac (27in): AMD Radeon 6970M Video Card Replacement Program (del 'mid 2011')
    http://xlr8yourmac.com/
    http://support.apple.com/kb/TS5167?

  • How durable is the ipad with retina display glass?

    How durable is the ipad with retina display glass?

    No different from the glass in other iPads or other brand tablets. It may break if you drop the iPad, especially if you drop it on a corner. It can also break if you drop something heavy on the screen. Saw one post where a mom said it cracked when her kid sat on the screen.
    Adding a screen protector will inhibit scratches, and may provide some protection in case of a drop. For max protection, get a wrap around cover.
     Cheers, Tom

  • Compared to the ipad 2 how big is the ipad minis screen?

    compared to the ipad 2 how big is the ipad minis screen?

    It is absolutely not half the size. It's the same resolution as the iPad 2 with a screen size of 7.9 inches across the diagonal versus the 9.7 inches of the bigger iPad.

  • How to airplay the iPad's screen to Apple TV?

    I am using the 1st Generation of iPad. And I have an Apple TV. I can only stream Videos, Photos or Music to the Apple TV only! What should I do to airplay the iPad's screen to Apple TV?
    Thanks a lot!

    You are talking about mirroring, which was a feature that became available with the pad 2.  The faster processor makes this possible, and is not available for the pad 1.

  • How to fix the signal with the microphone to the computer when recording through an interface? every time i record and play back i get poor signal and a lot of fuzz

    How to fix the signal from the microphone to the computer when recording through an interface in logic pro? Every time i record and playback i get poor signal and a lot of fuzz.. how can i fix this problem?

    Which model computer?
    What operating system?

  • How to fix an iPad touch screen?

    My iPad touch screen is writing alone and opening many task at the same time.

    Hi jcr1998,
    Welcome to Apple Support Communities.
    It sounds like you've already done quite a bit of troubleshooting with the iPad. The article linked below will provide a few more suggestions and help you resolve the issue.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Resolution
    If your device is experiencing any of the symptoms listed above, try the following steps:
    Restart your device
    Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
    If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
    Clean the screen with a soft, slightly damp, lint-free cloth.
    Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
    If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
    If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see theService FAQ for your product.
    -Jason

  • Can anyone tell me how to fix the problem with downloading music? Now with the new iOS5

    Ever since the new iOS5, and now 5.1, whenever I download music, and play it on my iPad2, the album cover will "flash" white between each song, whereas before the picture would hold steady for the duration of the album play! I have to admit I find this REALLY annoying! Even syncing with my MacBook doesn't fix the problem...any ideas?

    Hi Jane,
    First, regarding the virus issue, although I cannot promote any specific 3rd party software, there are plenty of FREE and very good anti-virus apps out there. You can Google 'free antivirus" and a good list will come up. You may want to look at a few reviews before you try. I don't know if you use Mac or Windows so you may have to do a little research on which is best for your computer platform. You can run the software and it will help clean off your system if there's a virus.
    Second, regarding your Elements sync to Revel, you may need to disable and then re-enable the Revel sync agent from within Elements, which you find in Preferences. In addition you may try signing out and then back into Revel via Elements.
    Let me know how that goes. If the disable/re-enable doesn't help, I'll get an Elements team member to see if they can help.
    Best of luck on the virus software!
    Glenyse

  • Anybody know how to fix the sluggishness with iTunes for my laptop?

    My laptop is outstanding, never crashes, no viruses, no slowing down, quick starts, very reliable.  Just a perfect computer. However with iTunes it stinks, it's slow, it responds slow, it'll freeze for sometimes up to (no joke) ten minutes waiting for responding to like a simple thing like delete a playlist. It's always been this way since day one, been through tons of updates but same issues. Can anybody explain it? Is it something in the settings that need a look at?  Thanks.
    Tommy V.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working ok now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • How to work the ipad with arturia minilab

    Hello I have an arturia minilab but I have yet to get it work consistently with the ipad. Very frustrating . I have the the tabletop , and the minilab apps. But no success , in the process of getting the mac book pro. Can anyone help me?

    Don't kow anything about it, but a quick Google search found this: http://www.youtube.com/watch?v=w4MizDxqDrc.

  • How to fix the mouse and keyboard freezing when installing Windows 7 on 27' iMac late 2013?

    Hi, I have a question for u guys who can solve this.
    I recently bought the new 27' iMac late 2013, and I installed some softwares and used it for few days.
    Before I bought this I used the 15' Macbook Pro Retina, I installed Windows 7 Home Premium 64 bit, and I used the Windows for gaming.
    So back to my question.
    So I bought the new iMac and I was tying to install Windows 7 Home Premium 64 bit (with the same CD).
    After dividing the partition, and other stuff, the iMac rebooted and I hold down the option (alt) key. I choose the Windows CD, and it said it is "getting ready to install Windows". I let it load, and the blue screen where you choose the language, time/location and keyboard input popped up. At the bottom right corner (at the same page), there is a button that said "Next (N)" which u need to click it to go to the next step. I was moving my mouse to click the button, but I realized that my mouse and keyboard was frozen. I tried both wireless and wired mouse and keyboard but they didn't work. There was nothing I could do. I hold the power button, (that was the only option) and tried my mouse and keyboard on Mac OS and it worked fine.
    I thought something went wrong in the CD so I bought the Windows 7 Ultimate 64 bit. The result was same. It frizzed again. (I just wast few hundred $)
    Latter my friend lend me his Windows 8.1 Pro 64 bit. I tried it, and it worked, it didn't freezed on Windows 8.
    The problem is I played Battlefield 4, Titan fall, and Watch Dogs, and Battlefield 4 multiplayer doesn't work on Windows 8.1. Even though when it works on Windows 8, I prefer using Windows 7.
    Dose anyone knows how to fix this freezing thing?
    My computer is:
    27' iMac late 2013 (bought it just few days ago)
    I did no upgrades when I bought it, except the graphic card.
    I bought the iMac in Korean Apple Store, and my Windows CD is in Korean, can that be a problem?
    Please leave a comment when u think u can solve my problem.

    See -> http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf.
    In addition to the Windows disc (or USB flash drive with the Windows installer) you'll need a 8GB+ flash drive.
    The referenced manual - on page 3, I think, gives you a run-down of what you'll need before you begin the installation. You may also want to post any further Boot Camp questions in the Boot Camp forum -> https://discussions.apple.com/community/windows_software/boot_camp.
    Good luck,
    Clinton

  • How much does it cost to fix the iPad cracked screen

    MY iPad screen broke. How much does it cost to fix it?

    Skydiver119 wrote:
    It's an out of warranty repair, so the cost starts at 219 for a mini, 249 for other models and goes up depending on drive size and whether or not it's 3G
    I would add that this is for a replacement iPad, not a screen, and that Apple does not repair just the screen (you probably knew that).

  • HT4061 Does anyone know how to sync the ipad with outlook calendar????  I cannot find anything her that makes sense

    I am having issues syncing with    outlook calendar.  Can anyone help?

    I use iTunes.
    So connect your iPad to your computer and open iTunes. Click on the name of your iPad. (You may need to make the sidebar visible, control S on a PC)
    Navigate to the info tab and scroll down. There should be an option to sync the outlook calendar. Choose that and then sync and you should be good to go.

  • How to fix the problem with importing CDs with the new version of itunes

    Hello,
    I am trying to fix my itunes so that i can import CDs into my library. I understand there is a bug and i need to change to the 7.9.3 but how do i do that?? I am not computer savvy when it comes to the inner workings and changing things like i need to with this problem so help is greatly appreciated!!!

    Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
    (1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
    (2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
    (3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499

  • I have some ideas on how to fix the issues with CC subscriptions

    This post is directed mainly at Adobe, but I would like the community to weigh in of course.
    (BTW, if someone has suggested this already, I apologize in advance.  I didn't get a chance to read through the hundreds of posts/replies about this subject).
    It's pretty obvious that many people don't like Adobe's decision to go to a subscription only plan and there are understandable concerns over not being able to access digital content if/when the subscription ends.  The purpose of this post is to discuss possible solutions to the problem.  If you want to discuss the problem(s) or complain about them, this is not the right discussion thread. (unless it's in the context of offering a solution)
    To get directly to the point, perhaps a hybrid model would be the best solution.  What I mean is this...why not take aspects of both the subscription model and the perpetual license model and combine them?  To help you further understand what I mean, I'll provide an example.
    Give customers an alternative
    Customer A purchases a CC subscription.  After a year, customer A decides to cancel the subscription.  Adobe obviously wouldn't think that the amount of revenue accrued from customer A after 12 months matches the value of the software provided (~ $600 USD).  Naturally, they don't want to give away a perpetual license for all that software at that price point.  On the other hand the customer still wants to be able to not only use the software, but more importantly, access the digital assets they have created during that the usage period.  The hybrid model would allow the customer to transition to a perpetual license with some provisions:
    Customer A can purchase a perpetual license at a prorated rate, based on how long they have had the subscription.  The rate should be calculated based on the amount of the time the customer had a subscription and the amount of time between major software releases (i.e. if there is a 2 year period between major releases and the customer subscribes for 1 year, take the value of the software if it were a perpetual license and subtract the amount paid by the customer during the subscription...or something along those lines).
    If customer A purchases a perpetual license (at the prorated rate), that person (or entity) would not be eligible for major upgrades unless they elect to enter the subscription program again.
    If customer A elects not to purchase a perpetual license right away, they have until just before the next major release to purchase it if they want to purchase it at the same rate.  If they wait until after the next major release, they may have the option to still purchase a perpetual license, but at a higher rate, but they can only purchase the version they had while subscribed.  If they want the newer release they must reenter the subscription process.
    Customers can't get newer versions of the software without first going the subscription route.  Perpetual licenses are given as an option for those who do not wish to continue a subscription, but still need to utilize a version of the software.
    I do realize that there are a number of scenarios to consider and need to be thought through.  For example:
    Customer B buys a subscription, stays on it for 3 months, and then decides to cancel.  Customer B elects not to purchase a perpetual license but decides to reenter the subscription program a couple of months after canceling and keeps the subscription for a month (and so on).
    How many times should a customer be allowed to exit/reenter the subscription program between major upgrades and still be available to purchase a perpetual license or should it even matter?
    What's the best way to calculate the cost of a perpetual license in this scenario?
    Should customer B be required to pay a reasonable "subscription reentry fee"?  The thinking is, if customer C keeps a subscription for a full 24 months (between major upgrades for example) and customer B keeps canceling and reentering during the same 24 month period, should customer C who has paid more during that period than customer B be treated the same?  Just a question.
    Obviously, the above examples are only suggestions and more thought needs to be put into them, but the central concept is this...both sides can win!  There is no reason why this situation can't be turned into a positive one where it's economically and practically feasible for both the customers and for Adobe.
    Anyway, I'm not the expert and I haven't considered all the angles and possible scenarios (obviously).  I just wanted to begin a discussion that might hopefully produce solutions to the problem(s).
    Your thoughtful feedback is appreciated (and needed ).

    Hi,
    Does your CSS have any styling for ul and li? Is this project that you upgraded to RH8 from a prior version of RoboHelp? If so, you may be experiencing the list problem: http://www.grainge.org/pages/authoring/lists/lists.htm
    Greet,
    Willam

Maybe you are looking for

  • How do I plot multiple points (scatter) on the same graph?

    Hello, I have a graph with a fixed X-axis and an array of Y values which varies. How do I plot these new y values without replacing the previous ones? E.g to have a scatter of new data? Example of shown in Figure 1 below: Figure 1: (Note: image was p

  • Is there any API

    Hi, Is there any API to update schedule_start_date and schedule_finish_date for workplan in Projects Please let me know even is there any sample code also?

  • Not sufficient authorization to run a query : multiple authorization

    Hello, I have ran into an issue way beyond my BW skills concerning authorizations used to restrict Queries data for certain characteristics. I am not sure which information are relevants, so here is all I gathered : Screenshot of the rsecprot transac

  • What to recompile when switching mysql versions?

    I tried using -Rs to remove mysql just so pacman would show what depended on it, but the list I got was rather paltry. For example, I know that qt has a mysql library, but it isn't listed explicity as a dependency. Is there some way to get a little m

  • Accessable Tab Focus Menu XML

    The XML menu I have developed is accessable for tab use only when the menu is the only accessable object on stage. When I put other objects on the stage that are tab focused, the XML menu is no longer tab accessable. How do I make my XML menu accessi