HT4061 I was software updating of my iphone when the updating complete and start installing the wi fi connection suddenly disconnected and it couldn't be completed. Now my phone doesnot display anything its like empty. it only shows the apple logo. help
Hi all,
i was upgrading my iphone to ios6.1.2; the upgrading had been completed and starting to install but suddenly the wi fi connection lost and the installation couldn't be completed. Now my phone is dead....it only shows the apple logo....can't do anything..help me out..
Press the button at the top right and the home button together for 30 seconds, when you see the apple logo, let them go.
if you see a picture of the itunes symbol and a whitye usb chord then connect the device to a computer and perform a restore.
Similar Messages
-
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
after i upgrade to ios 7.0.4 my iphone didn't work, only show a apple logo then dissapare again, and it happed almost a hour.
Try a reset by pressing and holding the home and power buttons for 15-20 seconds.
If it still does not boot up properly, put the device in DFU mode (google it) and restore. -
Nano shows blinking Apple logo.
I tried to plug in my Nano to charge today, and it started flashing the Apple logo and the no charge icon. It won't manually reset, and the computer won't recognize it to restore. Any suggestions on what to do?
Welcome to Apple Discussions!
Try these...
iPod Only Shows An Apple Logo and Will Not Start Up
iPod Only Shows An Apple Logo
btabz -
I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
While I was updating the software of my IPad, it stopped working and only shows the apple logo. How can I recover my IPad?
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
Is there anything I should do to the TV or any settings i should do from my actual Macbook? It only shows the space background but not any of my icons or what i am seeing on my laptop screen. It is a new adaptor which was purchased last week.
It seems as though though it may be a connection issue, possibly hardware or adapter. Make certain the connections are TIGHT.
For software you may try a smc reset:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Try a pram reset:
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
If no joy you can take it in to an Apple store genius bar for a free evaluation make an appointment first.
http://www.apple.com/retail/geniusbar/ -
Ipod only showing the apple logo and will not do anything else. 1st GEN
my ipod will only show the apple logo when plugged in to my computer i have a dell running xp but i have tried other computers and it will not do anything but show this symbol. my computer does not recognise that it is plugged in. ive tried the apple support fix-it but it does not do anything period. the buttons do not work when plugged in or not. the only thing it does is light up when plugged in. my other ipod works perfectly no problems so this leads me to believe that its not the computers i have used. just think the ipod has had it
Mine did the same thing last week after trying to update it via wi-fi. I then spent 11 hours Sunday updating my itunes on the laptop then restoring my ipod. Now all it does is beep as if it is just plugged in and flash the white apple logo. It beeps constantly. My computer at first didn't recognize it, then it did but said I needed to unlock it,(since I can't get the home screen up, I can't.) and now it doesn't recognize it at all. I've tried both computers.
-
my iphone crashed and isn't showing any icons or apps. Its only showing the home screen. How can I fix or resolve it.
Restore your iphone
If you can't update or restore your iPhone, iPad, or iPod touch -
I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine
Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W. -
I just got my a new iphone 4 from O2. i plugged in my phone to my computer(windows 7). itunes doesnt open automatically. when i opened the itunes,its still not detecting my phone. on the phone it only shows the cable and itunes logo. please help
Did you try to remove all Apple related software and reinstall iTunes again? Removing iTunes, QuickTime, and other software components for Windows Vista and 7
-
My i-tunes Wish List only shows the first page- it used to show all the pages. Its a little like the next page button is disconnected?
Any ideas?
thanks
SimonI would say all types. Any kind of document/ file that has multiple pages, I can't get to the next page.
-
my ipod was upgrading and my computer turned off in the middle. its stuck on a scrren showing an apple and a loading bar beneath it. i cant get it to turn off and the bar that usually shows up in itunes isnt there. how do i get it off this screen so i can use it?
did you try to sync your iPod again?
-
I have installed Photoshop CS4 on a new PC as my other has all but died. I applied the Camera Raw 5.7 update for CS4 to take care of the NEF files from my Nikon D3S. This works fine when opening NEF file, but in Bridge it only shows the NEF icon.
If anyone has any ideas, I would be most grateful.Purge the cache for the offending folder(s) through the Tools menu in Bridge.
Maybe you are looking for
-
HOw to get a common substring from two strings.
Hello, I have a question like..how to print a common substring in to different strings. example: String str1="dynamic" String str2="programing" so the output for this application is "am".
-
Hi all, Here's what I understand. Please correct me if I am wrong.. idm 6.0 segregates the concept of locking the account and disabling it. So, if the AccountId policy is set, the user account is locked, not disabled. if he/she has "n" failed login a
-
IPhoto rebuild deleted all my photos
hhello,so earlier today I was uploading some new photos into my iPhoto library from my iPhone & in the middle of impoting it stopped & asked to rebuild iPhoto there was a quite option but I pushed ok after a while of rebuliding iphoto quite I opened
-
My screens colors are all messedup
i dont know what happened i fell asleep with my keyboard on the bed and when i woke up all my colors are not normal is there anyway i can go to default? please help i dont know what to do here the desktop looks bright white and dock looks white as we
-
3rd Generation iPod Nano Help?
I have a 3rd generation iPod nano and my technical support is expired, but I wanna get it fixed because one day it just stop working.. It won't turn on or charge or anything. How can I get it fixed or where can I do to get it fixed and also where to