HT4061 IOS6.1 corrupted during install. Ipad now wont boot, stuck in recovery mode. Wont restore to factory settings, get error 3194. HELP !!

Hi.
I have just tried to update Ipad to IOS6.1, but it failed during install. The pad now seems to be stuck in recovery mode.
I have tried to restore to factory settings but I get a error code 3194
During attempted restore the restore screen does not show the Ipad name, serial number or software version number.
Any suggestions, I think it may need to be sent away to be repaired, and i fear this will be very expensive!!!

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
From the above link:
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    1.    Install the latest version of iTunes.
    2.    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    3.    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    4.    Try to restore from another known-good computer and network.
    5.    If the errors persist on another computer, the device may need service.
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom

Similar Messages

  • I have an iPod Classic 160GB and now it will not sync.  I have restored to factory settings multiple times.  It freezes during sync, gives -50 error code and says video is not supported on iPod.  Please help.

    I have an iPod Classic 160GB and now it will not sync.  I have restored to factory settings multiple times.  It freezes during sync, gives -50 error code and says video is not supported on iPod.  Please help.

    This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

  • My  ipad i have been restore it yesterday my computer shut down in the middel now my ipad2 stuck in recovery mode and cant be detect by itunes ?

    my  ipad i have been restore it yesterday my computer shut down in the middel now my ipad2 stuck in recovery mode and cant be detect by itunes and it is jaikbroken ?

    Try these steps. If it doesn't work the first time, try a second time.
    Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off. (If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.)
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on. (Note: If you see the screen that shows you are out of battery, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.)
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button
    If necessary, open iTunes. You should see the following "recovery mode" alert: "iTunes has detected an iPhone in recovery mode..."
    Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links. http://support.apple.com/kb/TS1538
    Hope this helps!
    ~Joe

  • Someone tried to jailbreak my iPod and now it is stuck in recovery mode. How do I fix it?

    I'm not sure what jail breaking is, however one of my friends insisted on jail breaking my iPod, 4th generation. Now it is stuck in recovery mode and everything has been wiped out. I had backed my iPod up to my computer before everything happened. Thanks for any help!

    I suggest that you find a new friend.  Based on the experiences of others, the jailbreaking may well be non-reversible.  Here are some things to try...
    Restore...
    Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    If the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.
    I really don't want to recommend the next step because it's a real PIA after the fact.  However...
    Restore as new with NO reload from backup!
    IF you choose to try it, here are some cautions.  Make absolutely certain that all purchased data, such as apps, music, movies, etc., are present in the iTunes library.  Also make absolutely certain that all non-purchased data, such as photos, pdf files, Word files, etc., are present and accessible somewhere on the computer's hard drive.  Be aware that you will lose all game data (scores, etc.).  Be forewarned that it is tedious recreating all your folders and putting each app where you want it.  Finally, be aware that all passwords will be wiped out and all settings will have returned to their default values.

  • IPad 2 that is stuck in recovery mode

    I have an iPad 2 that is stuck in recovery mode from failing an update.  It does not show up in iTunes or in My Computer but the Apple Mobile Device USB Driver is installed and working properly.  I plugged my iPhone up to the same computer and it works just fine.
    I have tried everything I could find from all the forums and nothing has worked.  Un-installed and re-installed iTunes, restarted Apple Mobile Device USB Driver, restarted the computer, held Home and Power buttons down.....I have no clue what else to do!
    Can anyone help????

    1. Turn off iPad
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times

  • I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help!

    I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??

    Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

  • Hi, I wanted to up upgrade my iPhone 4 from ios 4.1 to ios 5.1.1 and now i'm stuck in recovery mode and the restore doesn't work

    Hi, I wanted to up upgrade my iPhone 4 from ios 4.1 to ios 5.1.1 and now i'm stuck in recovery mode and the restore doesn't work
    I tried to restore with ios 5.1.1, with ios 5.0.1 and with ios 4.1
    none is working

    Mcloulou34 wrote:
    Oh my god, it finally worked ! I restored on an old PC and it worked !
    Thanks anyway for your help.
    But allow me to extend to you a simple reflexion about the jailbreak (even if my iPhone wasn't... except if my little cousin jailbreaked without me noticing the advantages or disadvantages) : Would you refuse an alcoholic trying to go to rehab ? Would you really let someone trying to restore a cellular phone die without it, because he went on the bad side a couple of years ?
    Not a great analogy, but this is a user-to-user forum, and Apple will not allow discussion of jailbreaking; if someone tried to help with jailbreaking the message would be deleted. However, if you have a jailbroken phone Apple will generally not block a discussion of how to unjailbreak it. The only problem is that not all jailbroken phones can be restored successfully; it depends on the method of jailbreaking (which I can't discuss without THIS message being deleted).

  • Tried to update my i phone 4s, now the phone isnt going on unless i restore to factory settings. The screen is just showing a usb and arrow to I Tunes, it also says if i restore i will lose all media, which hasnt been backed up recently. Any answers?

    tried to update my i phone 4s, now the phone isnt going on unless i restore to factory settings. The screen is just showing a usb and arrow to I Tunes, it also says if i restore i will lose all media, which hasnt been backed up recently. Any answers?

    It's in recovery mode. Anything that was on the phone and not already backed up is already gone.  You have no choice but to restore.

  • I try to update my iphone 4 to ios 7.1.1. But now my iphone stucks in recovery mode and can't connect to itune. i use windows 7

    I try to update my iphone 4 to ios 7.1.1. But now my iphone stucks in recovery mode and can't connect to itune. i use windows 7

    Try the iTunes troubleshooting advice here:
    Windows - http://support.apple.com/kb/ts1538

  • Downloaded ios7, now I'm stuck in recovery mode

    I just downloaded ios7 via wifi (because I don't have my computer any more, which will be important later), and when I tried to install it, my phone got stuck in recovery mode. It tells me to plug it into iTunes, but to sync it with iTunes I'd have to restore it, which unfortunately would mean I lose everything on my phone because my computer is gone and I am currently using my wife's. Do I have any other options to try to fix this?

    fritzfromwest palm beach wrote:
    for those of you people iphone wont restore i had that same problem a few days ago try to update with itunes iPhone stuck in recovery mode still can't restore with itunes but i think i find how to get out of recovery delete itunes 11.1.2 and itunes library and download itunes 10.7 that work for me after all if it work then you can update back to itunes 11.1.2 if it doesn't work for you might need a new batery let me know if it work for you guys
    Try this. Connect the phone to the charger that came with it, and reset the device by holding power and hte home button until it turns off. Then try restoring again.

  • Recover photos from iPad 2 that's stuck in recovery mode (no backup)

    My iPad 2 is stuck in recovery mode (genius bar can't get it out). This happened while I was on vacation and unfortunately some of the videos and photos are not backed up/synced. Before I "restore" through itunes (and erase everything), is there any way to rescue the photos and videos?  I've googled third party software and it doesn't look like anything will let you back up your data while the device is in recovery mode. 
    If I can't rescue anything while the device is in recovery mode, does anyone know if there's a way to retrieve photos from the device directly (not through itunes or icloud) *after* a "restore" (which has wiped the device)?  I don't care about anything else on it and I don't care if it has to be put on another device (computer, thumbdrive, etc).  The guy at the genius bar said you can't, but I see there are software programs (unfamiliar to me) that promise to do that.  I don't know if they really work, though.  I wish I understood whether the "restore" process really has the ability to permanently delete photos on the device or whether the photos remain there, but are inaccessible.
    I know it's a longshot and it's my own fault for not backing up, but before I do anything irreversible I want to be sure I've exhausted the possibilities.  I'm willing to pay for a program/service to retrieve the photos but I am not sure if there's anything out there that will work.
    Thanks in advance for anyone's help. 

    No doubt this is too late for you, but it might help others.  My 2 1/2 year old iPad 2 running iOS 7.1.1 (I believe) just started having the same problem last night. Til now, it's been running fine with iOS 7, though the battery life seems to be shorter than with iOS 6 & before.  Right now, the iPad just keeps recycling through the startup procedure, white apple icon on black screen, then black screen, repeated indefinitely. Tried everything.  Google searches gave me this thread/result, that I have to go through the recovery process, and thereby lose all my unsaved photos (my most recent backup is a month old), and others that say I might be able to recover files if I connect to a Windows machine.  But I only have Macs.   I was about to do the hard reset, recovery procedure, when it occurred to me to just open iPhoto & see if it recognized the iPad.  It did--even though iTunes doesn't-- it showed me all of the photos, including the one's between my last iPad backup and now, AND I was able to successfully download all of the photos.  YMMV, but this worked for me.

  • Ipad 2 stuck in recovery mode after updating to IOS 5, Unknow error -1

    Hi Everyone,
    my Ipad 2 is stuck in recovery mode after updating to the latest IOS 5. Tried to restore, it comes up with unknown error -1.
    Ive tried all that I can including the tips given in the apple forums and internet. Please help.

    Hello soccerlime,
    Thanks for using Apple Support Communities.
    The error code "9006" in iTunes when updating or restoring your device indicates that access to the iTunes update servers is being blocked.  Please take a look at the information below to help resolve this error.
    Check your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Resolve iOS update and restore errors
    Take care,
    Alex H.

  • Started update for my iphone and now it's stuck in recovery mode

    My computer wont recognize it. unistalled itunes and reinstalled it. Tried all the walkthroughs but none worked. Rebooted the computer, no difference. The worst is that I'm going away tomorrow, and need my phone. I love mye iphone, but seriously how much troubles must it be, with updating and syncin? Anyone who has a better idea.
    Get a error message when i plug inn the iphone, drivers missing mobile recovery... did what I found at the support page, but nothing happened.
    Help me please.

    I've had the same problem. Updated my iPhone 3GS this morning and the home button on the phone stopped working and voice control app kept popping up. Restored my phone & now it deleted everything but says it can't restore it because it's stuck in "recover mode". Please help.

  • While restoring my iPod touch 4G (iOS 6.1.2), after the "extracting software" step, iTunes says that it cant connect to iPod server. Now my iPod is in recovery mode and I can't do anything. Please Help.

    I have Windows 7 installed with the LATEST iTunes software.
    I get this message while restoring and now my iPod is in restore mode. When I try to restore it fails after this message pops up. Please tell me a fix to it.
    1) I've checked my internet connection. All the sites work perfectly.
    2) I've tried it after disabling the windows firewall as well as my antivirus.
    3) I've also tried changes with the "hosts" file in Windows>System32>Driveres>etc.
    NO HELP WHATSOEVER.
    PLEASE HELP.

    Try:
    - Powering off and then back on your router.
    - Anything else here
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

Maybe you are looking for

  • Assigning a function code to radio button in 4.5B

    I’ve a requirement wherein I need to trigger the PAI event in a module pool program when I select a particular radiobutton in a group and do some processing subsequently. For this I need to assign a function code to the radiobutton group. But the fun

  • Can't purchase full album, can only get songs individually

    I am connected to iTunes via the wifi on my iPod touch, and when trying to purchase an album it won't let me buy the full album it only let's me buy each song individually. The $12.99 button does nothing when I hit it, but the $1.29 button for each s

  • Photo scanning question: automatic cropping is imprecise?

    Hi, I am trying to scan a large body of family photos, and have read a bunch of tutorials on many websites. I bought a Canoscan 8800 scanner for the job. However, when I scan a photo and set the scan size to either a fixed size (3x5), or even "automa

  • Validating against XML Schema

    Hi, does someone know how to validate a XML file against a XSD File (XML Schema) in ABAP. Iam using the IXML Package. Thanks. Jim

  • Do I need to power off my iPad after each use?

    I bought a new iPad. The problem is after each use I have to power off in Order to connect to internet. Is there something in settings I need to do in Order not to have to shut my iPAd off so often