HT4061 ipad 2 does not restart when battery is fully discharged and has been put on charge - any one have a solution?

Ipad 2 - battery has fully discharged - connected to mains charger but no sign of charging and will not retstart on button press.
Tried re set and holding both buttons independently.
Tried other chargers taht are working with other iPads.
Any ideas?

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.

Similar Messages

My ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

my ipad mini does not restart when i press and hold the home and power buttons for a minute or more. what do i do? i really need to access some information on it. please help.

You need to connect to iTunes and restore.
iOS: Not responding or does not turn on
You may need to put the device into recovery mode, this is covered in the link on this page.
Did you back up the device?

IPad does not 'ring' when FaceTime call is coming in. Volume is up..How can I fix this ?

My iPad does not 'ring' when a FaceTime call is coming in..the volume is up...
How can I fix this?

It might be a good idea to reset network settings & reboot your modem:
Open Settings->General->Reset->Reset Network settings. You will have to enter your wifi passwords again.
Also go to Settings->Safari->Clear History & a Website data.

How to create a looping music player that does not restart when you go to other pages

Hello
I am new to web design. I apologize if I do not use the write
terminology. I am designing a website. I want to have a song that
loops continuously throughout the site and does not restart when
you click on the different pages. I have included a link to a site
that I found that does what I want to do. (Hopefully this link will
give you a better idea of what I am trying to describe)
http://www.marcuscoleministries.com/index2.html
Thanks for your time and consideration

You will have to use frames which in itself is a bad idea.
IMO music that
plays automatically is a terrible idea. It is likely to drive
away many
visitors and is unlikely to retain even a single visitor.
Avoid frames. Drop the music. You'll be happy you did.
Walt
"dbone1" <[email protected]> wrote in
message
news:fn36v6$de7$[email protected]..
> Hello
>
> I am new to web design. I apologize if I do not use the
write terminology.
> I
> am designing a website. I want to have a song that loops
continuously
> throughout the site and does not restart when you click
on the different
> pages.
> I have included a link to a site that I found that does
what I want to do.
> (Hopefully this link will give you a better idea of what
I am trying to
> describe)
http://www.marcuscoleministries.com/index2.html
>
> Thanks for your time and consideration
>
>

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off. Please if anyone has any idea that I do, let me know. thanks

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanks

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together.

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

Need to send my back up email a reset security questions email but the option does not show when I click on password and security

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97456)

My dad has dementia - does not remember his password. His hard drive has been erased. We need to reload Mountain Lion and can't figure out how to do it.

My dad has dementia - does not remember his password. His hard drive has been erased. We need to reload Mountain Lion and can't figure out how to do it. Internet recovery asks for his Apple ID and password. He has no idea. I have an Apple ID but have never bought anything through the iTunes store so it won't accept my Apple ID. I don't know if his computer is under warranty. He does not remember if he has Applecare. I tried reinstalling Leopard -- the computer originally came with Leopard -- but the computer screen goes grey and a message comes up saying I need to restart. He wants to give this computer to me since it's useless to him. What do I do to get a system on it again?

You will need to reformat the hard drive to go back to Snow Leopard or Leopard.
Does he have a Snow Leopard Disk? He should, as there is no way to go from Leopard to Mountain Lion without it. If you can find the Snow Leopard Disk, I'd at least start with that.
You will need to use Disk Utility in the installer to format the hard drive and get rid of the recovery partition.
Boot from the installer disk by holding down the C key on restart. When it boots, Open Disk Utility (Utilities menu, at least in Snow Leopard).
Select the Hard drive and then click the Partition tab.
Select 1 Partition from the partition menu.
Select Mac OS Extended (Journaled) as the format.
Name the drive (Macintosh HD is the standard).
Click Apply to partition the drive.
When it is done, quit Disk Utility and install the OS.

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of g

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .

I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"

Does any one have a solution to a blank disk not being read and unresponive to the eject button?

does any one have a solution to a blank disk not being read and unresponive to the eject button?

Apple Portables: Troubleshooting the slot load optical disc drive
Cures for an uncooperative CD/DVD drive
The Stuck CD/DVD Thread

TS1398 I have an iphone 3gs and since I made the 6.01 update everytime I want to join a wireless network I get the same error "incorrect password" when I now it's correct, any one have a solution for this? Tks

I have an iPhone 3gs and since I made the 6.01 update everytime I want to join a wireless network I get the same error "incorrect password" when I now it's correct, any one have a solution for this? Tks

I would say that you would want to look into the "Exchange Mode" for GMail. That would allow your iPhone to sync calendars, contacts and email with GMail just fine. Doing the same with your outlook should also then sync those same with your PC using Outlook. I've done teh iPhone side of this, but I since I don't run Lookout for my email client, I'm not sure how that will work on the PC side.

I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on.

I have a iphone 4s, it died and has been on the charger for the last two days and still wont turn on. How can i fix this???? condition of phone is not the best and was having issues staying charged to begin with but never NOT came back on. I've tried the holding of the home and power button but still nothing

iOS: Not responding or does not turn on - Apple Support
try this but maybe terminal if no result

Satellite M50D-A-10W does not boot after battery is fully empty

I have a Toshiba Satellite Notebook latop Satellite M50d-A-10W AMD A, 15.6.
I have problem when the battery is fully discharged I need use the needle to peform hard reset using switch behind the laptop.... then I can get into boot mode with f2
How can I solve the problem?
thank you

I guess you are talking about the force shutdown procedure as described in this document:
http://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm
Such issue may appear in case the PC is freezing, not booting or has a power failure.
I think the notebook goes off in case the battery would be fully empty. In such case the system does not shut down properly.
As default state, the system does not shut down the notebook but usually the unit performs an hybrid shutdown. This procedure allows the notebook to boot much faster but this might affect system boot in case something would go wrong while shut down procedure.
You can disable this hybrid mode and in my opinion this is also recommended.
Details:
http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
However, to avoid such issues its very important to perform the shut down procedure properly.

HT3964 My MacBook Pro i5 Dual Core has a hardtime waking up when the computer is put to sleep and only when it goes to sleep and has been asleep for a while. The indicator light flashes on and off for a while and then freezes. I've done an SMC reset once.

Does any one have the same problem with their MacBook Pro i5 Intel Dual Core? If the computer goes to sleep (not the screen) and is asleep for a while, when I try to wake it up it doesn't respond. I have to power it downn and restart it and sometimes it takes two or three attempts. Otherwise it works fine. I upgraded the memory to 8 GB. That is the only alteration doen to it. I've performed one SMC restart and now it wakes up but it takes a while and a gray screen shows up. When I insert a DVD it won't start automatically I have to start the application in order to see it. Any suggestions?

http://www.apple.com/support/macbookpro-videoissues/

Workflow process does not restart when re-ordering a PO

We are running SRM 7.0 with Process Controlled Workflow and have configured N-Step approval process for PO.
When the PO is ordered for the first time, the approver determination and the approval process work as expected. However, after the PO has been ordered, and the user makes changes to the ordered PO and re-orders it, the PO's approver list does not get refreshed, and the PO header shows the following staled information in "Approval" tab with "current status" = "Finished" -
Process Step Status Processor
SRM Purchase Order Approval Approved <approver user name>
And the PO would go into "Awaiting Approval" status but the PO work item does not appear in anybody's UWL.
Any hints regarding the possible cause of this behavior are appreciated.
Thanks.

Hello,
check in the BBP_PD the changed version po generated. there you will see if any WFL started or not. Or take the PO change version GUID and go at SWI6/swi1 to check the WFL log.
At SLG1 should appear also, check if at table /SAPSRM/C_WF_CST you have the trace level set to 1. This will make slg1 take all logs (green and red).
You can also always force a restart via BADI /SAPSRM/IF_EX_WF_PROC_RESTART
Thanks,
Melina

My iPad does not ring when I am getting a FaceTime call. And my volume is on. Also I have noticed when I charge my iPad at night I no longer hear that connection sound that it used to make. And lastly, my iPad will not flip when turned.

I no longer get a ring tone in face time when receiving an incoming call. My volume is turned on. Then I noticed when I charge my iPad at night, when I make the USB connection, it does not make tha connection sound any longer. And now my iPad will not flip. It only stays in one direction. Has anyone experienced these things? I do not know what to do about these issues. Thanks.

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

HT4061 ipad 2 does not restart when battery is fully discharged and has been put on charge - any one have a solution?

Similar Messages

Maybe you are looking for