HT4061 iPad 2 gets activation errors in FaceTime and messages,plus Facebook app opens and then closes

iPad 2 gets activation errors in FaceTime and messages,plus Facebook app opens and then closes

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Do NOT use an iPod/iPhone charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know. If the above test does, in fact, indicate a problem, read this.
Also, according to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

Similar Messages

MacBook Retina drains battery quickly!!!!! And I have no apps open, and the ram is 5GB out 8GB

My MacBook Retina drains battery drains too quickly!!!! And I have no apps open after restart, but there's still 5 GB ram the out 8GB Ram.. no idea what's happening. I uninstalled Chrome and other applications that I don't use anymore.
Help please. Thanks in advance.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Bought the new iPad and it's up and running, itunes and the app store are working well but when I try to open up either FaceTime or messages they won't open and a message appears cannot open try your connection. Help what is not right.

Have just bought the new iPad, everything working fine including iTunes, the app store and iCloud but when I try to log in to both FaceTime and imessage an error message comes up saying it cannot connect and to check my connections. What am I doing wrong.

The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
 Cheers, Tom

I get an error -3259 when trying to download an app. (And ONLY certain apps!)

Ok, this is really weird. At first I thought it was my firewall, because I just installed it, and now iTunes wasn't downloadinf anything. But i've come to realise that there is nothing wrong with my firewall, or router...it's iTunes! You see, I didn't think anything was downloading because the downloads were taking so long to actually start downloading. But it appears some apps download, while others don't. And I still can't explain why it takes so long for the download to actually start. My internet is at it's normal speed as always, the firewall isn't blocking iTunes at all, and it's the latest version. Plus, no everytime I start up, it asks me to enter my Apple ID and password. I'm thinking something has gone screwy with iTunes, because I've been over every thing that could have changed on my computer, and troubleshooted it. But as Sherlock Holmes said "When you have eliminated the impossible, whatever remains, however improbable, must be the truth."

Read this
http://support.apple.com/kb/ts1583

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?

I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203

Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.

When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

When I invoke Itunes I get an "error 7 (Windows 193)" message. I have reinstalled twice and get the same message. I have Windows 7 64 bit machine. Can someone help?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, re

I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

When trying to render i get the error "your hardware cannot render at the requested size and depth"

when trying to render i get the error "your hardware cannot render at the requested size and depth" and does not render,, it is the first time, and happens only when i added a filter from magic bullet and won't render.

Do you have 2 graphics cards in your system?
You can check out your hardware profile using the "System Profiler" app which lives in the /Applications/Utilities folder ... you can also launch it from the Apple menu by choosing "About This Mac..." and then clicking the "More Info..." button. When the app launches you can choose Graphics/Displays from the Contents/Hardware list at left.

I have followed every forum's direction and continue to get an error 100 when I load the adobe installer assistant and try to sign in to complete the download of Adobe Pro XI trial.

I have followed every forum's direction and continue to get an error 100 when I load the adobe installer assistant and try to sign in to complete the download of Adobe Pro XI trial.

Hi Stacy ,
Please refer to the following link to get details and solutions about Adobe Download Assistant .Please see if that fixes the issue.
https://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
Regards
Sukrit Dhingra

Exporting a sequence and getting an Error file too big message

I have tried to export a sequence using Quicktime conversion. It is a two minute clip and I keep getting an "Error, File too big" message. Does anyone know what can be happening?

What exactly are you exporting to? Settings, codec, data rate? What drive are you exporting to? How is it formatted?

Have Spotfy, Facebook App on home computer, trying to open on laptop and get this ERROR CODE: Firefox doesn't know how to open this address, because the protocol (spotify) isn't associated with any program. How can I fix?

I have used Spotfy Music App on Facebook on my home computer, now trying to use on laptop, and i get this ERROR CODE: Firefox doesn't know how to open this address, because the protocol (spotify) isn't associated with any program. How can I fix this? Thanks in advance for any help

Hi,
You may have to install the Spotify application on the laptop to get Spotify protocols recognized.

I'm getting an error Out of memory message when I try to render - There's lots of memory

I'm getting an error Out of memory message when I try to render - there's lots of memory and I've never gotten this before - any ideas?

Thanks - I did go through and change all the profiles to Apple RGB, there are several to choose - but I'm still having problems - I think it has to do with corrupt images - Im backing up and starting over - I've worked with images large and small for years and never had this problem - thanks

"Unable to connect to server" I have wifi connection but I'm getting this error when I try to purchase an app. Why?

"Unable to connect to server" I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(

Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.

I can't open .pkg files. i get an error telling me to choose an application to open them. the Installer app is not in my Utilities folder or in System/Library/CoreServices.

i can't open .pkg files. i get an error telling me to choose an application to open them. the Installer app is not in my Utilities folder or in System/Library/CoreServices.

Install the UnArchiver and try again.
http://wakaba.c3.cx/s/apps/unarchiver
There is no Installer.app in the Utilities or Applications folder, there is one in the System/Library/CoreServices.
If yours is not there, then you need to:
1: Backup your data off the machine to a non-TimeMachine drive and disconnect all drives.
2: If you have TM, try to restore the Installer.app from the TM drive and reboot. See if things work.
If the above doesn't work, your going to have to re-install just OS X 10.6 (and bundled programs) from the disk by holding c and booting off the 10.6 disk and simply installing OS X. Then software updating to 10.6.8.
This will replace all bundled programs and OS X, not touch your files (backup regardless) and most third party programs.
Some third party programs will have to be reinstalled form original sources because they install Kext files into OS X and thus kicked out by the 10.6 reinstall form disk.
All should go well, however if you boot to a gray screen or other freeze, reboot holding the shift key down, then update all your third party software to be current to 10.6.8.
Another method is to re-install in to CoreServices the Installer.app from the 10.6 disk using the extraction program called Pacifist from CharleSoft, then running software update to get any updates for Installer.app.
http://www.charlessoft.com/

HT4061 iPad 2 gets activation errors in FaceTime and messages,plus Facebook app opens and then closes

Similar Messages

Maybe you are looking for