HT4061 iphone cycling between apply screen and passcode screen

My iphone is cycling uncontrollably between teh apple screen and the passcode screen. Holding power button and home button for 10 seconds or more resets it temporarily but then the uncontrolled cycling begins again

Connect iPhone to Wall Charger with Lightning Cable for 20 minutes. Then try Reset while on charger. If still problem, Restore iPhone with iTunes on computer. Make sure iTunes is up to date. Open iTunes on computer, connect iPhone to computer with Lightning Cable. Hold both Home and Power buttons until iTunes recognizes iPhone in Recovery Mode, this usually takes about 20 seconds of holding both buttons. Click the Restore button of iTunes. If still problem, make Genius reservation and take iPhone to Apple for resolution under Warranty.

Similar Messages

Two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.

two days before my iphone 5 battery was expand and display screen came out and now there has some gap between frame and display.so how it will happen and i already got before months.now i need to backup all the data to icloud before through out.
https://www.dropbox.com/home/iphone
https://www.dropbox.com/home/iphonehttps://www.dropbox.com/home/iphone

Make an appointment at the genius bar of your local Apple Store. The phone has a 1 year warranty. If it's no longer under warranty, a replacement is $269.

My iphone 5 won't unlock and the screen fades to black.

My iphone 5 won't unlock and the screen fades to black. I can't answer calls or texts. help!

Hard Reset
Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
Peace, Clyde

Difference between modal screen and normal screen

Hi everyone,
Now,I am developing a dypro. when I create a modal screen ,I found no difference between normal screen and modal screen.
eg. If I use the statement "call screen" , whatever which type of screen you use, the results look like the same. The same to the statement "call screen start at end at".

Hi
Screen type for modal dialog box
If you activate this attribute, the screen is used as a modal dialog box. In the program, you call the screen with
CALL SCREEN STARTING AT <top left>
ENDING AT <bottom right>.
Unlike normal pop-ups, a modal dialog box has its own pushbuttons and title. There is no menu bar and command field entries are not possible.
Normal screen type
If you activate this attribute, the screen is flagged as a normal screen. This is the default setting.
Alternatively, it may have the following special functions:
Subscreen
Modal dialog box
Selection screen
Class screen
In the Screen Painter, you can choose between normal, subscreen, and modal dialog box.
Selection screen and class screen attributes are assigned by the system.

My iphone 4 wont stop vibrating and the screen is blank

my iphone 4 wont stop vibrating and the screen is blank

Im having the same problem, but im not in US. My mobile company told me they will check the phone and return it in 5 days; but ive been reading different reviews and people who had the same problem got new iphone from apple. Dont know what to do! i take care of my iphone a lot and dont know what its going on!!

HT5463 my incoming calls will not ring when locked. how do I get rid of the lock screen and passcode for good?

I have mu phone set up on locked screen and passcode. I want to take this off. I am unable to receive calls in locked screen.
I need to hear all my incoming calls.

Double check settings - do not disturb - is off.

Turned iphone off cause it wasnt working , not stuck on circle loading screen and apple screen, they go back n forth tried rebooting didnt work

My iphone was acting up, so i turned it off and it got stuck on the black circle loading screen and apple screen, thhey go back and forth. tried rebooting it and it didnt work, goes to apple then back to circle loading screen. connect it to itunes reads it but wont sync it or restore it.

From http://support.apple.com/kb/TS3694#error3194:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

My Iphone 3 gs is restarting, and a screen to connect to Itunes. When I connect, and restoration, in order to process the information appears: "An unknown error occurred in the restoration (-1)". Help me please!

My Iphone 3 gs is restarting, and a screen to connect to Itunes.When I connect, and restoration, in order to process the information appears: "An unknown error occurred in the restoration(-1)". Help me please!

That is a baseband error. Has your phone ever been illegitimately unlocked? If so, that problem happens. If you haven't jailbroken/unlocked, visit your local Genius Bar.

My iphone 5 has just crashed and my screen is now black

My iphone 5 has just crashed and my screen is now black and i cant see anything but the sound is still working when i press my middle button
HELP!!

Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

My Iphone 6+ gets very hot and the screen pops up a little

My Iphone 6+ gets very hot and the screen pops up a little. Is that normal any one experience this before?

I did yesterday. They inspect and repaired it. And gave me back my phone and claim that its was not assembled well at start. was an un aglinment. They have fixed it and aglined it according to them. I dont feel that that could be the reason. I have used it for half a yr already now then its un aglinment appears?

20" imac won't start up-flashes between blank grey screen and black screen

20" imac
2GHz Intel Core 2 Duo
Was running system 10.5.8 just fine. Worked great.
But then I wanted to give the imac to a relative. And so, I tried to boot from the original grey mac install dvd to wipe the hardrive and set the imac back to factory specs.
But it wouldn't boot off the dvd. All It would do at restart was to flash slowly back and forth between blank grey screen and black screen. So, I tried the Leopard update dvd. Same results. So I zapped the pram and tried again. Same results.
If I just pushed the start button tho.. the imac would start right up and run fine. However, I didn't want to give it to someone else with all our information on it.
I finally restarted it and held the "T" key to turn it into a giant firewire drive, hooked it up to our other 20" imac, and used the disk utility from the second imac to erase the drive of the first imac. Then I inserted the grey install dvd into the second imac and selected the drive of the first imac and ran the install process.
Now, the first imac won't start up at all. Just a continual grey screen for a bit, than a couple of buzz sounds in the machine and then the black screen... than back again.
It ran great before I erased the drive and re-installed OS 10.5
What's wrong? How do I get the machine to either boot off the install cd?

So, I've figured out a little more on the first machine. It's a 20" 2.6 GHz Intel Core 2 Duo running 10.5.8.
It ran great. But, I wanted to erase the hard drive and reinstall the OS system before giving it to a relative.
I found that although the optical drive would read and write to normal cds and dvds, the machine would NOT boot from the grey start-up disks I had on hand. ( I have two imacs, and I tried both sets of dvds without success.)
I zapped the PRAM, and used disk utilities via firewire connection from my other 20" imac to check the hardrive and make repairs. Disk Utilities couldn't find any problems. So, using disk utilities from the other imac, I erased the first imac's harddrive and then used the install dvds on the second imac to install the original OS to the hard drive of the first imac.
(looking on the hard drive of the first imac, I can see all the contents)
However, the first machine will not start up. It just switches from grey....to black..... then grey..... and then black again.... over and over
Why won't it boot from the newly installed OS on it's own hard drive?
And Why won't it boot from the original install dvds?
How can I get it to start up again?

HT4528 my iphone 4 just turned off and the screen is black and it wont turn on . its in perfectly good condtion and ive had it since april , help please?

my iphone 4 just turned off and the screen is black and it wont turn on . its in perfectly good condtion and ive had it since april , help please?

I've tried that. It doesn't work. The only thing that happens is the apple comes up. I've tried holding the home as I'm plugging it in and keeping it held for a few minutes, but nothing happens. My iTunes doesn't even read that it's connected.

Can Motion 5 replace a green screen and blue screen in the same shot?

Can Motion 5 replace a green screen and blue screen in the same shot? I would like to replace a green screen with one image, and a blue screen with another.

Fox gives a good example for keying green & blue (or any other color) from the same shot. I'd suggest doing a few things to get better accuracy.
First, the motion keyer always removes the color it detects the most of by default (blue/green). You can override this by setting the Strength parameter to zero, then use the Color sample tool to select the color you want. The advantage is motion will do a good job of targeting only the hue (color) that you want to remove and set an appropriate starting softness. It also will remove spill based on this color. Looking at Fox's example movie and the shot, I'd approach the same shot this way:
Remove the Blue
1. Apply the keyer and set the strength to zero.
2. Use the Sample Color tool and select the blue (or other color) to be removed.
3. Decrease the spill level (if needed). In Fox's example the spill from the blue glasses is going to be minimal, especially compared to the green screen, your shot may need different adjustments. Only de-spilling what you need to will give you more accurate color right away and minimize additional color correction that might be needed later.
4. Use the Color selection tools (Chroma wheel/Luma bar) to fine tune. Ideally you want a minimal tolerance, the inner selection, with a nice fall off, the outer selection. Try with the Scrub boxes setting first, then switch to manual if you need more control. Again see Fox's example.
Remove Green
It's the same as the blue, you could apply the keyed to the same clip or a parent group, at this point it's many user preference.
With these techniques you can remove any color from a shot or create a mask based on a color. BTW, as you are learning to use the keyer I'd highly recommend having the Color Selection open so you can see the graphs. These give you real time feedback as you make selections and changes with the Strength, Refine and Color selection tools. Watch what happens as you make selection or changes, sometimes the problem area is actually in the brightness not the color, or the softness may change more than the tolerance selection. Observing what is happening in these graphs will help you figure out wha to change and speed things up.

Hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do

hi i had my ipad mini on the windowsill and the touch screen is not working or the button on the screen and the screen is coming away is there anything i can do will apple take it back

pvonk wrote:
Apple does not replace or take back devices that are damaged.
Depends on the damage. The battery came loose in my iPhone. When Apple opened the phone to redo the glue they discovered the speakers were also loose. Apple replaced the phone.
If the glue was properly bonded or had some other flaw Apple will replace the device if the device is still under warranty.

On my iphone4s, music control do not show up on the screen and the screen cannot be rotated.

On my iphone4s, music control do not show up on the music screen and the screen cannot be rotated.

Couple of clarifications, the rotation lock is not set. The controls are visible for video and other apps. Only the music screen does not rotate or show the controls.

HT4061 iphone cycling between apply screen and passcode screen

Similar Messages

Maybe you are looking for