HT4061 My iPhone keep showing the iTunes logo
I made the latest update.
I was chilin on instagram.
The camera begin to do weirdo stuff and then the iPhone simply shot down.
Now, each time I wanna boot it up it shows this images:
I try to connect it on iTunes obviously. iTunes tell that my iPhone needs to be restarted and that I will lost every of data.
Leaving no other choice I wait until it finishes to be updated. Like 20 minutes an then my iPhone restart and show this image above AGAIN!!!
Please help...
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
Similar Messages
-
My iphone 3g show the itune logo and when I restore it, it says restore error 46? What is restore error 46? How could this be resolved?
Hi! were you able to restore your phone?
-
Why does my iPhone keep showing the Apple logo, dimming, then showing the logo again?
Trying to update to iOS 8 and the phone keeps showing the Apple logo, then dimming after a number of minutes then showing it again.
Hello cgb1508,
Thanks for using Apple Support Communities.
From your post I understand that your iPhone will not boot past the Apple logo. To troubleshoot this issue please follow the steps in the support article below.
iOS: Not responding or does not turn on
Take care,
Alex H. -
Good day, please help do a manual reset on my iphone 4s. I was updating my itunes and all a sudden i discover the USB cord disconnected while updating which later show me itunes logo with the USB cord charger display since yesterday. Help me gain access back to my iphone 4s so it can start working effectively . Thanks.
http://support.apple.com/kb/ht1808
-
i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on, i tryed to update my iphone and now my phone screen show the itunes logo with a wire and won't turn on
Did you try to connect in recovery mode to your computer, explained in this article?
iOS: Unable to update or restore -
My iPad was disconnected during upgrade. I've tried restoring and resetting. I just did an iPad erase in "find my iphone" and it still shows the itunes logo and the fire-wire cable on the screen with an arrow. It's currently plugged into my computer. How do I remedy this?
Unable to update or restore
http://support.apple.com/kb/HT1808?viewlocale=en_US -
I am trying to get my contacts of an old iphone 3. It show the Itunes logo and the usb connector of the phone charger. How can I get that off the phone and access my contacts.
Ideas anyone?You need to plug it in to iTunes. Once it starts working again, back up the old iPhone to iCloud then go to iCloud in settings. Turn on contacts then you get them back. Another option is to back up to iTunes with the old one, then on the new one, go on iTunes, click restore backup, and choose the old iPhone. I suggest using icloud. Hope it helps!
-
I awoke this morning to find my iPhone 3g in recovery mode. I tried rebooting, charging, and when I connected to iTunes it gave me a message saying I had to finish recovery first. My screen shows the iTunes logo and the USB cable. Any ideas?
http://support.apple.com/kb/HT1808
-
My Iphone 4 will not turn on all it will do is show the iTunes logo and and arrow point to it with an image of the connector to power cord. Ive tried to turn it off, taken out sim but nothing
Hello there, FrancesCech.
The following iPhone Troubleshooting Assistant should help with what to do with your situation:
Apple - Support - iPhone - Restore Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/restore/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
My iphone went blank and when I plugged it into outlet the screen shows the itunes logo and a picture of what looks like the charger. I tried to reset it and it does not respond. Can anyone help?
That screen means it has gone into recovery mode. You need to connect to a computer running iTunes by following the instructions in http://support.apple.com/kb/HT1808 for the procedure of recovery mode connection.
-
My ipod keeps showing the apple logo and it goes off then back on, i tried restoring it but it doesnt let me of some error code 3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore -
Last night I turned my iPod touch 4g off randomly and then when I went to turn it back on and went to unlock the screen it froze up right there and will not unlock to the home screen to where all my apps and all that are. Ever since that happened the iPod keeps showing the apple logo repeatedly, as well as a screen being completely blank when still turned on. Also when i plug in the iPod to the computer it recognizes it for a second but the iPod does nothing and shuts off and repeats in showing the apple logo and blank black screen. I can get it to the home screen where the slide to lock button is but every time i even attempt to slide it, it freezes up and doesn't do it.
I also having been trying to restore it by plugging in the cord and pressing the home button to get the screen with the usb cord to pop up but no matter what i do, it will not let me turn the iPod off period because every time i keep trying to do that it just shows the apple logo and all of what i said up above again. I have also seen it get a white screen to show a few times , which i assume means the white screen of death. I have never seen that screen before this happened.
I know this is not making any sense whatsoever but this is very hard to put into words in explaining. I have searched the internet but i can't find a single problem that sounds like this one in solving to fix it. The iPod is on right now as i'm typing this. I haven't attemtped to push the buttons down again to fix as i would assume maybe to just leave it alone as i sleep through the night in hopes of it maybe working or even dying. I've only had this iPod for 4 months now and i just don't understand why it won't let me turn it off completely or work properly for me to restore it.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
HT4528 My phones shows the itune logo and ubs cord
I cannot get my phone to turn on. The face shows the iTunes logo and a ubs cord
It is showing you that you need to connect the iPhone to your computer and restore using iTunes on your computer.
-
My ipod keeps showing the apple logo on and off after i updated it?
my ipod keeps showing the apple logo on and off after i updated it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?
You will probably need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad.
Maybe you are looking for
-
Migration of FI Documents (RFBIBL00?)
Hi all, I know that the RFBIBL00 report is <b>the</b> report to migrate FI documents. The only concrete experiences me and my pals have with that report are with non-SAP legacy systems. When migrating from SAP to SAP would you still recommend RFBIBL0
-
Export to excel with maximum 65536 rows
Hi My reports are desinged with CR 8.5 report designer. I have some history reports that's large. When I export them to excel 2000 or 2003. It cuts off at row 65536. I did some research and it seems to me that is the max rows for excel 2003 and lower
-
Displaying "uploading" and then "initializing" progress bar?
Hello, Can somebody point me to the right direction here. I am uploading images and its showing "uploading" status, then server resizes images and i want to show "initializing" status while its resizing. And i want to show two different preloaders
-
I used Compressor to make an MPEG-2 file for an 108 minute movie. I used the bitrate calculator and the m2v file was 4.37 GB but when I imported it into FCP it was huge, too big to burn (5.0 GB) I used the setting for 120 Best quality 4:3 and the m2v
-
Can JNDI store a datasource? It is supposed to...
I am trying to learn how to use JNDI to store a datasource. If I use the DataSource as below (without JNDI), the path and process works: connection = mysqlDataSource.getConnection();However, I want to try to retrieve the connection via a Context, and