HT4061 my phone is locked and the passcode will not work

does anyone know how to unlock my iphone?

If you have a passcode to the screen lock that you've forgotten and your device is running iOS 6 or earlier, restore the device from the computer to which the device is synced. For information and instructions, see:
http://support.apple.com/kb/ht1212
If that will not work, you'll need to put the device into Recovery Mode and then try the Restore again:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
If your device is running iOS 7 and you set up Find My iPhone (iPad/iPod),  however, then it has the Activation Lock on it and you'll have to erase the device through iCloud first:
http://support.apple.com/kb/HT5818
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Similar Messages

  • I dropped my phone in water and the speaker will not work

    I dropped my iPhone 4 in the sink and pulled it out immediately but it had been completely submerged. I then shook all the water I could out and found that everything worked fine, except for the speakers. I now cannot place a phonecall or play any music with out headphones or a speaker. Also when I try upping the volume, it says headphones when the volume thing is displayed. Is there any way I can get my speakers to work again? I have my phone in a bowl of rice already.

    You're lucky that's all that went wrong.
    First thing is to immediately turn off the phone.
    There is probably still water in the headphone connector causing a short.
    To dry the phone place it in a bag of rice and leave it there sealed in the bag of rice for several day. Hopefully when you turn it back on the headphone connector will work as before.
    Normally submergence in water destroys a phone.
    If the phone does not return to proper working mode, make an appointment at an Apple Store to have the phone replaced for the out of warranty fee.

  • I just took my new MacBook Pro out of the box and the screen will not work. Display is, black no life to the screen at all

    So I just ordered my first Mac book Pro. I took it out of the box and hit the power button to do the start up and the screen will not work at all. I shut the computer off and back on again. I plugged it in and unplugged it. I've done everything I can think of and the screen still stays blank with no life at all

    Is the battery charged? Press the little button on the left edge, near the front. If no green dots, no charge.
    Does it charge? When you connect the MagSafe charger, does the pilot light on the plug light up?
    Does it actually start? Should sound a chime after you press the power button on the top/right corner. If it chimes, does the Caps Lock pilot light when you press it?
    If it starts and Caps Lock does flash on and off, have you tried pressing the screen brightness control for awhile? F2 turns up the brightness, may be turned fully down.

  • I have an ipad 1 16gb, wifi and the wifi will not work.  Under settings, it says "no wifi".  Has anyone else had this problem?

    I have an ipad1 and the wifi will not work.  It is a wifi only model which makes it more interesting.  When I go into settings, it says "no wifi".  Does anyone have a solution to my problem?  It is much appreciated.

    If you are positive there is a good Wi-Fi signal in the area of the iPad I would first reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
    If that doesn't work, I would turn off your iPad and then restart your Wi-Fi router. Unplug the router for 30 seconds then plug it back in. Once the router had completed its restart process and established a link to the Internet then turn your iPad on. Make sure Settings > Wi-Fi> On.

  • My ATV light keeps flashig and the unit will not work. Any sugestions?, my ATV light kees flashig and the unit will not owrk. Any sugestions?

    my ATV light keeps flashig and the unit will not work. Any sugestions?,

    Sounds like an update gone wrong.
    You need to restore:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    If you've not tried unpowering and restarting that's always worth a shot.
    AC

  • My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
    If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again.

  • I have Dreamweaver CS5.5 and the FTP will not work. Any Ideas?

    Hello anyone out there. I just got off the phone with Adobe and they no longer support the product.
    I keep getting this message:
    Toggling the "use Passive FTP" checkbox may help you establish a connection.
    -Select or de-delect the checkbox and click Test to try again.
    _If you are connecting to an IPv6 enabled server, please select the "Use IPv6 transfer mode" checkbox in the Advanced site definition dialog.
    If the problem persists, check your network settings, including hte local firewall settings on your computer, or consult your network administrator.
    I cannot connect to the server and I have checked everything with Godaddy and it is fine. I have checked with Apple and it is all fine and the cache is empty.
    Any ideas?
    Suzwagner

    I'm guessing your site is not properly defined.  See screenshots below from Site > Manage Sites.
    Servers: Root Directory is whatever your hosting provider (GoDaddy) told you to use.  This varies by web host.  The most commonly used ones are html_docs, public_html or www.
    Click the TEST button.  If you're connected, Save and exit this panel.  If you can't connect, click More Options:
    Nancy O.

  • Ipad wont turn on and the reset will not work. when i connect to computer, it is not recognized. what next?

    my ipad will not turn on and I have tried the reset process and I have tried to connect it to my computer but it is not recognized by the computer. Not sure what else could resolve this issue and get my ipad to reset?

    Did you try to get it working on another computer, see if that does it. BTW have you re-charged it using the 10w power adaptor, it might be out of power.
    there's also a possibility that it may be a battery issue. contact apple if problems persist.
    - Good Luck

  • Amd suitchable graphics with hd6670 (and intell 3000 ) will not work on windows 10

    hi there i have amd suitchable graphics with intell , and the amd will not work on windows 10 pro x64 the actual model of the amd is HD 6670 but is using the drivers of the hd6470. in any case it will not work in windows 10 pro x64 after a clean install. please any help thanks

    Have you disabled the firewall in you security system?  Windows firewall rarely gets in the way, but security systems' do.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My iPhone has been badly damaged and I cannot get the screen to work. I want to do a backup to transfer to my new phone but the backup will not work because the phone is locked. Can I input my lock code to the phone via the computer to allow a backup?

    My iPhone has been badly damaged and I cannot get the screen to work. I want to do a backup to transfer to my new phone but the backup will not work because the phone is locked. Can I input my lock code to the phone via the computer to allow a backup?

    Sorry, no.

  • Phone is disabled and voice activated will not let me put in passcode

    phone is disabled and voice activated will not let me put in passcode.
    The double tapping password does not work....HELP!!!!!!

    iOS: Forgotten passcode:
    http://support.apple.com/kb/ht1212

  • I am trying to import developed images from LightRoom 5 in o Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file.  Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this?  I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand.   Thanks.

    Have you tried restoring the Preferences yet?

  • I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

    I am trying to import developed images from LightRoom 5 into Photoshop 6.  I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file.  Use the 'properties' command in the Windows Explorer to unlock the file'.  This has not happened before.  How do I change this?

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

    Hello there, TempestBelcher.
    It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
    Apple - Support - iPhone - Calls Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/calls/#section_0
    If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate.  Now I have no phone and I am becoming frustrating.

    I ordered my new S5 online and after following the steps outlined in exact order, my old phone no longer works and the S5 will not authenticate.  Now I have no phone and I am becoming frustrating.
    It downloaded all my contacts, photo's with no problem.  I called the number they gave me from my old phone and then turned it off.  I then put the sim card in and charged the phone.  I followed all the setup steps and no I cannot send any text or make any phone calls.  I get a message that they cannot authenticate my phone to dial #8899 but get the same message.

        Hello Notahappycamper1962
    Let's get that S5 up and running! I want you to love the S5! Is the old device powered off? What zip code are you in?
    I look forward to hearing from you and getting this addressed.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for

  • My new rMBP 13" inch has a exclamation point on the wifi signal, even though i can browse just fine.

    Not a major issue,but still one i'd like to solve if possible Just some background on the machine, i bought it only today, though its a mid 2014 model. 2.8 GHz Intel Core i5, 512GB model. I don't know what to think, is this a software issue with Yose

  • Excise invoice number range assignment

    Dear SAP Gurus, This is with regarding Excise invoice number range assignment (J_1IINTNUM, J_1IRG23A1, J_1IRG23A2) For the financial period April 2011 to March 2012, following number ranges exist already in SNUM. 01---- 2011--5007393-5999999 01---201

  • Photoshop CS6 Retail Subscription suddenly will not open any image files

    I signed up for a trial subscription and I have 18 days left. I was using this as recently as yesterday and it was fine. Even the 'windows' menu shows no open windows BUT the recent places menu shows the files I tried to open. What could the problem

  • What is the diference Between....

    Oracle9i Database Release 2 Enterprise/Standard Edition for HP-UX and Oracle9i Database Release 2 Enterprise/Standard Edition for HP-UX/IA64 (v9.2.0.2) Beseide the Version. What is the IA in the name? tkx in advance Paulo Aboim Pinto Amadora - Portug

  • NSInvalidArgumentException: unrecognized selector sent to class

    I'm trying to find my way around Objective-C and Cocoa, and I've stumbled upon a problem I just can't figure out. I think I'm missing something fundamental here. Here's the issue: I have a subclass of UIView with a NSMutableArray *_balls declared in