HT4061 phone wont turn on  apple logo blinks when plugged in

My phone will not turn on

ok? does it show a USB cable at all?
If not- try a hard reset. Press the top power button, an the hom button- both at the same time unti you see an apple appear and then let go. Your phone will then restart.
(do not have it plugged in wile you do this)
If it gives you any errors or solves your problem, please write back and let us know.

Similar Messages

  • Blackberry curve wont turn on or even blink when plugged into a wall charger. what should i do?

    so i completly dissasembled my 8310 to see if there was a short somewhere and i didnt find anything obvious. i was playing aroung trying to find the problem when i realized that the red light comes on when i plug in the wall charger and the LCD is not connected. but if i plug in the LCD then try to charge it, the light will not come on. could this possibly be a short within the LCD that is causing the whole phone to fail? what should be my first step?

    Bring it to an Authorized Apple Repair Center.  They will likely help you replace it.
    Here's how to find one:
    Find an Apple Authorized Service Provider

  • My battery died, I charged phone now black screen apple logo blinking. How do I fix?

    My battery died, I charged phone now black screen apple logo blinking. How do I fix?

    If Apple replaced the battery, contact them to check the phone, the battery replacement is covered by a warranty.
    iPhone - Contact Support - Apple Support

  • My iPhone 4 is shut off and wont turn back on, unless i plug it in an outlet & when i do that it says "connect to Itunes" & then i do that and the phone wont turn on & it shows nothing is plugged in . HELP!

    My iPhone 4 is shut off and wont turn back on, unless i plug it in an outlet & when i do that it says "connect to Itunes" & then i do that and the phone wont turn on & it shows nothing is plugged in . HELP!
    & it keeps trying to turn on but it wont . like the apple logo pops up for a minute , then turns off.

    Had exact same problem. Rang Apple support and various apple repairers. All of them said in effect, too bad, you'll have to lose everything since your last backup. It's a work phone with very important stuff on it and the latest backup was on a computer that had a virus. Convergence of crap :/
    Happened to talk to a friend who said to try replacing the battery. Did that. Problem fixed. All data saved.
    To all Apple support people: rather than say 'once it's in recovery mode you lose all data' try saying 'replace your battery and see if that works first'!!!!

  • My phone wont go past apple logo!!

    I had my phone on the couch and i went away and came back, and realized that it was turned off, i tried to turn it back on but it wouldnt go past the apple logo, i went to AT&T and the tech said it had water damage, and the water sensor was pink, but i dunno how it got water damage sitting on the couch plugged into my laptop.. Is there anything i can do to fix it?? Even my laptop or iTunes cant pick it up. Any ideas?

    Just go into DFU mode by pressing the sleep and the home button at the same time for about 10 seconds or until your screen is black and after you do that yo keep pressing the home button.
    (Before you press anything connect iphone to computer with itunes open it wont recognize it until you are in DFU)
    After you are in DFU; in itunes press restore(this will delete all your data)
    hope it works

  • IPhone 4 won´t turn on, apple logo blinks

    When I woke up this morning, my iPhone 4 said that I had to activate it by connecting it to iTunes. I had no computer nearby, so I waited for a while. Now it does not react, unless it plugged in to a Mac. When it is plugged in the apple logo appears for 10 seconds and then it´s gone. It has been blinking for about 4 hours now. I´ve tried to hold the power and the home buttons in several times, but it does not work. It was and still is fully charged. Anyone who has any experience with this?

    You'll probably have to try to force it into recovery mode and restore it: http://support.apple.com/kb/ht1808.

  • Ipod touch won't turn on, just shows the apple logo - even when plugged into Itunes?

    I have an Ipod touch 8GB - it's virtually never been used. I have tried to charge it up but nothing happens - it just displays an apple logo. I have plugged it into Itunes but again nothing happens. Any ideas?
    Thanks K.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Apple logo flashes when plugged in. can not use at all

    every time i plug my ipod to my computer or any power source. the apple logo flashes and i am unable to restart, reset, or any other 'r'. has anyone else had this problem?

    On standalone, disconnected from PC,
    What do you see on the iPod screen?
    What is the iPod battery level?

  • Phone wont go past apple logo on startup frozen

    my phone is just stuck on the allpe logo on startup. nothing seems to work. tried home button and sleep button at the same time, nothing, holding home button, nothing.. connected to computer, same thing..

    Take a look at this link, http://support.apple.com/kb/HT1808

  • Iphone turned off and wont turn back on makes noise when plugged in and heats up

    I was syncing my iphone 4s and then i unplugged it and it would not turn on! i tried everything from reseting to restoring and itunes still detected it but the iphone would not show any sign. exept when it is plugged in, it would make that sound that detects charging over and over again. then it heats up. i tried taking out the battery and putting it back but still does nothing.

    You could give this a try? Please note - I have not tried this and cannot verify it's reliability.
    http://jaxov.com/2010/05/recboot-iphone-recovery-mode/

  • HT4061 my phone wont turn on so i cant getbthe seriel number, even when i plug it in the computer the apple sign pops up and goes in and out..

    my phone wont turn on anymore, at first it was just shutting down for no reason but still coming on but today the phone wont come back on,now the apple sign is on screen and going in and out. what should i do to fix this problem

    If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
    If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge.  If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars.

  • HT4623 help! I didn't use my ipad for about a month then now it would not turn on, just a balck screen with apple logo blinking in the middle, please help

    Help me. I did not use my ipad for about a month.Now that I turned it on after trying to charge it for many hours, it just would not turn on, just a black screen with sometimes an apple logo blinking, brought it to repair shops, said they could not fix it, please help

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • HT4061 my iphone will not do anything...i tried to restart and reset......the phone only displays the apple logo.

    my iphone 4 will not do anything....i tried restarting and resetting....the phone only displays the apple logo.

    Hello there, Faustinamarfo.
    The following Knowledge Base article provides some troubleshooting steps for your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Particularly:
    Display has no backlight or dark screen
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT4623 i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can  any1 help me?

    i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can  any1 help me?

    If you have a backup of your information on your computer, I would suggest putting your phone into recovery mode, by holding down the home key and keeping it held down while you connect it by usb into your computer with itunes running. Keep the home button held down until it indicates recovery mode, and proceed with the restore.

  • HT4061 My I phone wont turn on....  Help?

    My I phone wont turn on, I've tried the reboot, any other suggestions??

    Hi Hudson,
    If your iPhone will not power on successfully you may want to follow the steps in the article below to get it back up and running -
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Have a good one,
    Braden85

Maybe you are looking for

  • Wrong Price in Shopping Cart after PR Changed in ECC

    Hi All, I'm using SRM extended classic scenario, and i have the following scenario: 1. Create PR in ECC using material assigned to contract (contract exist both in SRM and ECC) with quantity 8 PC. This PR document type didn't use release strategy. 2.

  • T430 DisplayPort doesn't show pre-boot display

    We have T430's (and X230's for that matter) connected to L2251x's via a Mini Dock Plus 3. We also have McAfee SafeBoot installed, which has a pre-boot password prompt before hitting the Windows 7 OS. No matter what we do, we cannot output this pre-bo

  • Net payroll to 3rd party outsourcing-US

    Hello experts, Our client has decided to perform Gross payroll inhouse and outsource Net payroll to third-party company ADP in US. what are the pre-requisties for this requirement. Please advise !  How complex is it please advise. Janet

  • Cuttin a string in bash

    Hi, I want to cut a string in bash to remove a number in the string, and save that number for further formatting. At the moment, I am doing it with two double sed's, but I was wondering if it is possible to do it more elegantly. Here's an example of

  • LSO Problem

    Hi Folks We have an issue with our LSO 300 system. According to SAP documentation, the course events which are occured in the past do not trigger a notification but in our case, the system is sending out notifications for the past events as the train