HT4061 Serial # dm******186, No luck with hard restart.

Screen frozen. Hard restart tried, no luck
<Re-Titled By Host>

Did you try holding down the sleep and home keys until it reboots, about 20 seconds or so?

Similar Messages

My battery drained. Screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc.

My battery drained. Pluged in to wall but screen shows battery with red line but doesn't seem to be recharding after 20 min. Should I wait longer or do a hard restart? I haven't backedup in ages and don't want to lose pics, contacts etc. Will a hard restart wipe all that out?

Agree with Richard:
-Your device needs both the CR and LF. To accomplish this:
option 1: Concatenate the "end of line" string constant (this is a combination of CR and LF, located in the string pallete) to all your outgoing commands. Make sure in the "Visa configure serial port" the "Termination character enable" flag is false.
option 2: Concatenate only a CR to your command's strings. Make sure in the "Visa configure serial port" the "Termination character enable" flag is TRUE AND that the termination character is set to 10 (meaning LF) which I think is the default.
Details can be seen in this link:
http://digital.ni.com/public.nsf/allkb/862567530005F09C862565BE005AB500
"Adding Termination Characters to VISA Serial Writes in LabVIEW"
Interesting would be to configure the serial port to accept not one but two termination characters. The above links refers to the document "Developer Zone Tutorial: Termination Characters in NI-VISA.", where this is supposed to be possible. The document however is 404'ed.
If someone find a working link please post it.
Regards

No luck with SCT

I tried overstock and J Crew and didn't get any pop ups. I even made sure my pop up blocker was off and that I'm opted in for offers. Is it because I was in using my phone? Wasn't sure if that matters or not.

texasmommy wrote:
Ok, I should've known that. Lol. I was hoping I'd get an offer based on my TU score. Thanks!Although the SCT doesn't work on Synchrony Bank, the best part about them is that they are mostlyTU pulls and after 2-3 months, the hard pulls generally fall off your report. You have 3 cards and if you have loans or a mortgage, then you would have the diversity you need to help your score improve. I've only been working on rebuilding my credit in earnest in the last 6 months. Comenity store cards are a good way have more tradelines, but the downside is that unless you have a good score to begin with then you get some credit limits like $200-$500 and YMMV on increases. Overstock and JCrew have grown the best for me and I think as my score improves, then I'll be able to get multiple increases at once rather than one monthly. I guess I'm a fan of Synchrony because Sam's Club is my smallest limit and next month I plan to ask for $5k. Someone on the forum once said only get the store cards you really plan to use and they were right because I have closed 4 and I will probably close one more if I can replace it with a bank card. Remember, each time you apply for EQ and EX, your score will take a hit, and the same with TU, but you might have better luck with Synchrony Bank.

FYI: MS-7125 BIOS has problem with Hard Drives withNative Command Queuing (NCQ)

For those the have messed my two treads on which both ended up being cause by K8N Neo4 BIOS problem with HD's with NCQ.
Will wonders never cease? MSI Support finally conceded the BIOS has a problem with Hard Drives with NCQ and they have forwarded the problem to their programming department.
However, do not look for any results for above two weeks.
Roger

The problem that this thread has been trying to follow is the incapability of the nVidia RAID Controller with Serial ATA Type 2.5 drives. I know the threads has been hard to follow and part of that is because when I started the thread I had what appeared to be three totally un related problems, but all three were traced down the common problem of the incapability of RAID Controller with Serial ATA Type 2.5 drives.
The title of this thread is MS-7125 BIOS has problem with Hard Drives with Native Command Queuing(NCQ). The statement was true at the time it was written and has nothing to do with memory problems.
Sense the thread was started MSI has fixed the BIOS part of the problem, but we have sense learned the nVidia RAID Controller Command software and its driver has problems too. I have been working MSI Support, they have been using me to test pre-beta BIOS and Drivers soon. Of the testing I have done the pre-beta BIOS worked and the Pre-beta 32-bit driver works. I am assuming that the latest BIOS V1.B had as part of it included fixes was the needed fixes for working with the nVidia RAID Controller as I have test the pre-beta RAID Driver with BIOS Version V1.B as the Raid array function fine windows XP Pro 32-bit Edition. As I have had no communications with MSI support of over a week now I am hoping for a release of 32-bit and 64-bit RAID Drivers. But, nobody should get the hopes up, because through other backdoor sources nVidia is having a hell of a time. One reason for this I heard is that the nVidia RAID Controller is fully software, no hardware other than the electrical drive interfaces. Their problem started when they tried using the old 32-bit code Controller with new 64-bit hardware drivers and now they are having to totally rewrite the controller core in 64-bit code. But, knowing my source, it may all be fiction.
The RAID Array you say is up and running, are the drives full specification SATA 2.5 in other words do the both have 3Gb/s speed and NCQ. If you send me the full part numbers I will check the specifications a get back to you. Because if you have nVidia RAID 0 Array you working you will be the first to have done it and there about 230 people around the world that would like to know how you did it, even MSI, who's pre-beta nVidia RAID Drivers that will work with BIOS V1.B for 32-bit Windows only and nothing for Windows XP 64, would like to know.
Roger

TS1398 Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working!

Got the dreaded no wifi on my wife's iPhone 4S. Wifi greyed out and no luck with the reset network instructions. Why isn't Apple addressing this issue? We are a family of Apple product users, 2 ipads, an ipad mini, 4 iPhones but one isn't working! Issue began whenwe upgraded the operating system.....
Come on Apple.....get this issue sorted out!

Just out of warranty. This is a software issue. everything was ok until the software update. Apple just need to sort it out.

Iphone 5 system serial no doesn't match with outer box? Case of misprint? i see only one latter is serial no doesn't match

I recently bought iphone 5 32gb white. Was surprise to see the outer box serial no doesn't match with iphone 5 system.
They have print XXXXXXTXXXX on box and on phone its XXXXXX7XXXXXX. Only one latter is mixprint though.
I check coverage status at apple site. The box serieal no is not found in apple system while the iphone 5 inside serial no i can see warrenty.
plz help is it normal to have serial no unmatched on phone and box or the phone is not genuine

You are correct. The SIM Tray of iPhone 5 does not have the Serial # printed on it. So your Serial # is the one in the Settings app About. This is your true Serial #. A 7 and a T from a box label are not distinct enough to matter. Apple will only honor the Settings About Serial # and the ones located inside the iPhone 5, which will be the same as the About Serial #.

HT201364 Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont k

Hello ! i have a question about my Hard's Disc storage space. I have Mac book Pro 11" Retina with hard disk 120 GB . I want to make this update but its impossible because of no free space. And now i want to ask. Its 120 GB full space but i dont know how. It tells me lets say i have 30 GB movies but i dont have anything ! Can you help me with any way ? If i can do something to see what movies let's say means !
Thank you !!

Hope this helps.
1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Start up in Safe Mode
    http://support.apple.com/kb/PH11212
3. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
4. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
5. Disk space / Time Machine ?/ Local Snapshots
   http://support.apple.com/kb/ht4878
6. Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409
If this does not help, you have to buy an external HD and move your movies photos.etc to
the external HD.

Anybody had luck with there wifi greyed out after update to IOS 7

I've been trying all sorts to get my wifi working on my iphone 4s, been searching the internet to solutions, turning airplane mode on and reseting network settings - didn't work, reseting all settings - didn't work. Some have said that if you erase all content and data, basically a factory reset turning it back into what it was when you got it out the box works, but it doesn't, for starters it still doesn't go back to IOS 6 (what it would of been out the box), its still IOS 7, when you go into setting/general/about section and look at the wifi there is no wifi address. Has anybody had any luck with solving it, tried going through apple but they say because its out of warrenty i've got to pay for a repair, seen as its happened ever since putting IOS 7 on my phone, i see that as apple broke my phone, so they should fix it for free.

This is almost always a hardware problem that requires repair or replacement of the phone. Downgrading to iOS 6 wouldn't help, even if you could. There's a small chance that it can be fixed by following the suggestions in this support article:
iOS: Wi-Fi settings grayed out or dim
FYI, do not try the "freezer" or "hairdryer" methods you may see posted. At best they are temporary fixes and are very likely to cause additional damage to the phone...

No luck with LOM

I am having no luck with lights out management. I'm running on the new Xserve line. I configured LOM in the Server Monitor tool. I gave the LOM a static IP based on the ethernet ID it gave. I then opened up server monitor on my Mac Pro and plugged in the IP, user and pass and am just getting waiting for results. The Xserve is plugged in on ethernet port 1 so I set up LOM on port 1. Any ideas?

Hi
Have you looked at these yet?
http://www.apple.com/support/downloads/xservelightsoutmanagementfirmwareupdate11 .html
http://docs.info.apple.com/article.html?artnum=304896
Hope this helps, Tony

FAGLGVTR carry forward does not work with hard currency

I have a problem with carry forward with hard currency.
I m running transaction FAGLGVTR when I click on to see the balance balance shhet accounts it only shows me balance in transaction currency and local currency but show me 0 (zero) in column of hard currency.
My configuration:
Define Ledgers for General Ledger Accounting is 0L --- FAGLFLEXT
Define Currencies of Leading Ledger --- I have two currency
But the problem is that displays zero in hard currency and not drag balance

The note 963259, if partially solves the problem, but now in some accounts no carry forward in the new year.
The problema ocurr in account defined in Trx FS00 with "account currency = hard currency". The other account not have that problem.
I appreciate your cooperation
Thanks
Oscar

Why can't I download ios 7.0.2? I get a message ' this download cannot be installed because it requires 3.4gb of storage. My ipad is 32gb it's new with hardly anything on it. I think iCloud is blocking it what can a I do?

I get a message ' this download cannot be installed because it requires 3.4gb of storage. My ipad is 32gb it's new with hardly anything on it. I think this message refers to iCloud and that is blocking it blocking it. what can a I do?

Please go to Settings>General>About
Please check the entries for Capacity & Available.
Regards,
Steve

I have both a MacBook Pro and macair but the pro won't let me in I think it something to do with hard disc or permissions as it says system profiler in utilities , if anyone could help I'd be very grateful

I have both a MacBook Pro and macair but the pro won't let me in I think it something to do with hard disc or permissions as it says system profiler in utilities , if anyone could help I'd be very grateful

Restart the MBP and immediately hold the option key down. Release the key when you see the Apple logo. The computer will boot and show you a screen with two hard drive icons.
Select Recovery and hit Return.
On the new screen, select Disk Utility and hit Return.
In DU do this:
In the list at the left, select the name of your hard drive. (Be sure to select the name that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
When that is done, click Repair Permissions. Be patient!
When that is done, quit DU and restart in the usual way.

Any luck with a 3.1.3 fix? Aside from the one(s) that have yet to work

Any luck with 3.1.3 anyone? I am captive to a wi-fi connection and its getting really annoying not being able to use the 3g service when I leave my house. The solution(s) provided so far have done nothing to fix the problem. This is in regards to apps crashing and no internet service while on the iphone 3g network.

I have tried all the fixes suggested multiple times then went to apple store and the guy told me I should buy a new phone? Just hoping the issue isn't dead as it still seems to be a problem for some, lots of threads about it still being reported as an issue.

HT201412 apple iphone 4 ringer does not respond, mute switch is off,no volume indication on screen. Tried hard restart and reconfigured via itunes, and nothing. Can hear ringtone via earphones. Have tried almost everything with no result. Any suggestions

Apple iphone 4 no ringer, mute switch is off, no volume indicator on screen. tried hard restart and reconfigured via itunes, have IOs 6.1.2, no jailbreak. Can hear ringer with earphone- Have tried almost everything, buit nothing happens. Any suggestions?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Best way to deal with hard coded variables in a package

There is a plsql package that reads a line from a file, parses the data, does a ton of sql operation with it (select update, inserts, calculations) and then writes the output to an output file.
The file names and the firectories are retieved from a database table.
Example:
select location,file_name into loc_in,file_in from temp_tbl;
p_File_handle := utl_file.fopen (loc_in, file_in, 'W');
My co worker is suggesting that getting the variable values from the table is not a good practice. He suggests that the values should be hard-coded in the program. Now you might ask what would happen if the file name or directory changes. His suggestion is to have a build file and do a token substitution of those hard coded values in the program and then load in to the DB. In short the process will involve the following steps:
-Get the package from the repostory.
-Change the file name and directory in the token file.
-Run the build process that will replace the values in the package .
-Load the new file (with the updated values) in to the DB.
Example:
This way the program will be initially coded like this:
p_File_handle := utl_file.fopen ('${loc_in}', '${file_in}', 'W');
After the build file runs, it will replace the values as
p_File_handle := utl_file.fopen ('C:/test', 'testfile.dat', 'W');
Once the file has changed with the new updated values, compile that into the database.
Ideas/comments?

Re: Best way to deal with hard coded variables in a package: why have you reposted using a new profile?
Neither post provides enough clear information on what the actual requirement is. We need more data in order to comment on your idea, your co-worker's, or to suggest alternatives.
My co worker is suggesting that getting the variable
values from the table is not a good practice.His reasons for this are...?
"variable values": Why do they vary? How often do they change?
The file names and the directories are retrieved from
a database table.How do the values get into the table? What is the volume of the data?
Oracle version? Operating system?

HT4061 Serial # dm******186, No luck with hard restart.

Similar Messages

Maybe you are looking for