HT4061 what should i do when my iphone screen goes white and also has the ios 7 update
My iphone 4 screen started to glitch out and i tryed turning it off and restarting but nothings working so i decided to keep it off for about 20 mins and now my whole screen just went white and i cant get into my phoen or access anything.
Do you have a backup of your contents? When the iPhone showed the screen with the USB cable and said to connect to iTunes, it had already entered the recovery mode which means all content had been erased. So you need a backup from before the water damage and problems started to get your contents back.
Similar Messages
-
What can i do when my ipod screen goes white and i cant see anything?
Please! Somebody give me some advice on what to do when my ipod is white and i cant see anything? i can listen to music but i cant see what i am listening to?
If none of the usual 5 R's of troubleshooting do any good, you'll need to have the iPod either serviced or replaced as the LCD screen or ribbon cable is damaged or faulty.
http://www.apple.com/support/ipod/five_rs/nano3gen/
B-rock -
HT1212 What do I do when do ipod screen goes white
What do I do when do ipod screen goes white
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
What do you do when your iphone screen goes black
My phone died and i started charging it and when i did it charged but the screen was black but it vibrated like i was getting text messgaes but nothing would show up
Have you tried resetting your iPhone?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
I have had a number of issues with my Intel Mac recently and had to reboot using disk utilities, safe mode, OSX recovery, but always come back to the login screen but when I type my password the screen goes white and returns to the login screen. My password is correct and the login does not jiggle as it would if the password was wrong. Please advise,
Back up all data if you haven’t already done so. There are ways to back up, even if you can’t log in. Before proceeding,you must be sure you can restore everything to the state it’s in now. If you’re not sure you can do that, STOP.
The procedure below may spare you the need for a clean reinstallation of OS X. If you don't feel comfortable carrying it out, don't. try.
Briefly, you need to delete the following file:
/var/audit/current
If you already know how to do that, you can skip the rest of this message. Do it, and try again to log in.
Boot in single-user mode by holding down the key combination command-S at the startup chime. If you’re using an external USB keyboard, it must be plugged directly into a built-in port on the Mac, not into a hub. Release the keys when you see a black screen with scrolling white text. In this mode, there’s no graphical interface; just a command line. Initially, you can’t make any changes to files.
When the text stops scrolling, and you see a line ending in a pound sign (“#”), type the following command:
mount -uw /
You must type the command exactly as given, with no mistakes. If you don’t feel able to do that, STOP. At this stage, no harm will be done if you make a mistake, but later, it will be. Press the return key.
Next, type the following command:
rm -i /var/audit/current
Press return. You should get the following output:
remove /var/audit/current?
If that's not what you get, STOP. Type the single letter N, press return, and try again. Otherwise, type the single letter Y and pressreturn.
Finally, enter the command:
exit
Press return. The text will start scrolling again, and then the system will reboot. Try again to log in.
Credit for this solution to ASC user AnthonyTW. -
i get a 3914 error when i try and restore my iphone 4. my screen goes white and all different colors what should i do
first try a different usb cable, remove all other usb devices, and try a different port in back on desktops if possible. if no luck see these
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart. -
HT204053 What should I do when I changed my apple password and apps will not except it?
What should I do when I changed my apple password and apps will not except it?
Find out what apple id was used to purchase those apps and use that password.
-
Ever since the 1.1.4 update whenever I push the home button to awake my phone from sleep mode the screen goes white and delays to go to the "Slide to Open" screen. It does it at least three times a week. What do you recommend I do? Should I reset my phone? What would happen if I did so?
Message was edited by: kirachemReboot your phone. Hold the HOME and SLEEP buttons about 8 seconds, until the Apple appears. Do not "slide to turn off" when that display appears, just keep holding.
-
when i go to a website and try and go to another the screen goes white and nothing ever happens. i have firefox 4 installed
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
When I turn on my ipod touch the screen goes white and stays white.
When I turn on my ipod touch the screen goes white and stays white. It plays but all I see on the screen is white. I cannot change anything.
It iTunes is asking to enter the passcode then:
- A data recovery company may be able to help
- Restore the iPhone from the backup of the iPod. You can then get the data off and then retore the iPhone from the backup of the iPhone. -
I 'm getting message "Mozila Firefox not responding." It takes minutes to down load a site - some times just gets in a loop and never down loads. The little circle at top just keeps going round in circles .
Then when I try to click on the screen again the screen goes opaque and I get the same message re " Mozilla Firefox not responding" - and it is minutes before I can get back in to close down screen.
I have downloaded Fire fox version 4 and this is still happening.See:
* http://kb.mozillazine.org/Error_loading_websites -
With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1
This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.
-
Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
What should i do when my iphone 4S shuts down at 20-30% battery?
I have gotten a few times the situation that my Iphone shuts down and it was still at 20%+. When i try to turn it on again it says that the battery is out. I put it back in the charger and i can turn it on immediately. What should i do? It is still in guarantee period
GreetingsTry recalibrating the battery meter... fully discharge (until it shuts off) and then fully recharge (don't unplug until 100%) to recalibrate the battery meter. You may need to do this a few times.
-
When phone screen goes off and turned on the running app closes. Why ?
When i run Here Map app and after the timeout the screen goes off and when i turn on screen back the app will be closed.Is this a problem or fire fox OS works like this ?
Are you sure, the app is closed (possibly, it is only minimized and you can access is via the application manager: http://mzl.la/1BATUYe#w_open-the-application-manager)
Maybe you are looking for
-
How to get shape layer's content parameters in AEGP?
Hi all, I have no idea when I want to export the parameters from the Contents of shape layer. Now I add Polystar Path1, ZigZag 1, and Repeater1, three contents of shaper layer. Content seems not equal to effect. I used AEGP_GetNewEffectStreamByIndex
-
Odd discovery regarding throughput to/thru TC
Here is a puzzle I wonder if anyone can figure out and also check to see if the behavior can be replicated. In a previous post I complained about the 300KB/s throughput I was getting when copying files to my TC (using disk sharing) or through TC betw
-
ITunes error -15000 with AirTunes after autostartup in mini player mode
Hi, I was looking for a way to submit an error description to Apple but on the support pages I didn't find an email address for such a purpose. Anyone knows one? I'd like to submit the following iTunes problem to Apple: If iTunes is autostarted from
-
CAN WE ROLLBACK TRANSACTION IF WE YOU INSERT WITH NOLOGGING CLAUSE ???
-
TS3274 MINE SAY'S "COULD NOT SIGN IN - THERE WAS A PROBLEM CONNECTING TO THE SERVER".
MINE SAY'S "COULD NOT SIGN IN - THERE WAS A PROBLEM CONNECTING TO THE SERVER".