HT4061 Why is Iphone 5 not able to connect to Mac or Ipad through bluetooth
Why is my Iphone 5 not able to connect to Mac or Ipad through bluetooth
I have tried all sorts of resetting and tricks to make it work but my IPHONE 5 CANNOT connect to its sisterdevices like Mac or Ipads. it seems to be millions that have the same problem.
Will there be a fix for this or don't they care at all?
No iPhone has ever supported file transfer by Bluetooth & most likely never will. So, don't expect a "fix".
Similar Messages
-
my iphone is not able to connect to itunes and shows the msg "cannot connect to itunes store"
Hello there, Nau1988.
The following Knowledge Base article should help with troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
In your case, focus on the section titled "Troubleshooting on an iPhone, iPad or iPod Touch", there are detailed steps here for working to a resolution of your issue.
Additionally you might want to review the recommendations in this article as well:
iTunes for Windows: iTunes Store connection troubleshooting
http://support.apple.com/kb/HT1527
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
After update iOS7, my iphone 4s not able to connect any Wi-Fi. I tried all the possible ways, but faild.
Settings > General > Reset > Reset Network Settings
-
HT1420 i am not able to authorised my mac with iPad
i am not able to authorised my mac with ipad
What happens when you try to authorise your account on your computer's iTunes ? You should be able to do so via the Store drop-down menu at the top of iTunes :
If your iPad hasn't been synced to that computer before then you may also find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141 -
IPhone Remote - iPhone is not able to connect with my library
Hi, after searching the internet for a solution, i hope one of you guys can help.
Well, when i start Remote on my iPhone iTunes detects the Device, and im able to enter the code in iTunes. But when im trying to connect to my library, my iPhone just won't do it. I tried to turn off my Firewall, but still the same problem. I tried to open the Ports, but nothing helps.
Does anyone has a clue what i could try to make the Remote working?
ThanksTry following the instructions here to make sure your firewall is not blocking access:
http://support.apple.com/kb/HT2553
Remote uses TCP port 3689 and UDP port 5353 to communicate with your iTunes library. -
I am not able to connect my Mac book pro with iPhone 6 using bluetooth
Specification of my Macbook Pro :
Model Name: MacBook Pro
Model Identifier: MacBookPro11,1
Processor Name: Intel Core i5
Processor Speed: 2.4 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 3 MB
Memory: 8 GB
Boot ROM Version: MBP111.0138.B11
SMC Version (system): 2.16f68
Serial Number (system): C02M4ZD0FH00
Hardware UUID: 1D25A9C3-C1ED-550F-8743-FF6DEAD9A59D
OS : Yosemite 10.10.1
I am trying to Handoff between my Macbook pro with IPhone 6+, however it is not happening. Even the Bluetooth connectivity is not
happening between the devices.Try going to System Preferences/Bluetooth and then turn it off, wait a few seconds, then turn it on.
Bluetooth Quick Assist -
IPhone 4 not able to connect to the internet via home network
WiFi is on. the home network appears under WiFi with a check mark, but when I go to Safari or go to download email, it's still using the 3G network. What's up? I've already reset the network settings. My kids iTouches are doing the same thing. Their error message is Cannot Open Page.
I have the same problem. all started when upgraded my iphone 4 to iOS 4.3...
hopefully, this fix this on the 4.3.1 and SOON! -
HT1600 I am not able to connect my mac book pro to the airplay mirroring...I need help please
I have set up everything as supposed to. I have the Apple TV connected to the same wireless as my Mac Book Pro. My computer is only a couple months old so it is compatable. I just bought the Apple TV, and when I go to the display on the menu bar, it does not show the apple tv device detected. I dont know what to do. I need help
is airplay enabled on Apple TV? is the device up to date? Is your computer up to date?
Also see
http://support.apple.com/kb/TS4215?viewlocale=en_US&locale=en_US -
Not able to connect VS Web Developer Express through instant client 10
I just spent 10 hours attempting to connect Web Developer Express 2010 to an Oracle 10g database. In the end the solution was beyond simple, but with the existing threads there is a lot of talking around the problem. I’m posting this in case it might help someone else.
Obtain the Oracle instant client software that will work for your database. You will only need the basic package.
http://www.oracle.com/technetwork/database/features/instant-client/index-100365.html
Extract the contents to a temp location on your hard disk
Create a directory for the application – it could be anything, but here is what I used
C:\instantclient
Copy the extracted files into the directory you just created.
Right click on my computer and choose properties
Under advanced and environment variables you will need to add the directory you created above to the system variables PATH. You will need to create a new system variable called TNS_ADMIN and put the same c:\instantclient path in it.
Create the file tnsnames.ora under the c:\instantclient directory and put your customized entry in it. Below is an example.
tnsnams.ora file contents
<Alias for this tnsnames entry> =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <Your Oracle Server>)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = <Your database instance>)
It’s a good idea to restart your system after this installation.
In web developer express use the .NET Framework Data Provider for OLE DB.
Here is the key piece of information!!
Under server name you need to use the alias from the tnsnames.ora file entry. If you do not do this it will not pick up the SERVICE_NAME parm and will give you some goofy error like:
ORA-12514: TNS:listener could not resolve SERVICE_NAME given in connect descriptor
or
ORA-12514: TNS:listener does not currently know of service requested in connect descriptorI just spent 10 hours attempting to connect Web Developer Express 2010 to an Oracle 10g database. In the end the solution was beyond simple, but with the existing threads there is a lot of talking around the problem. I’m posting this in case it might help someone else.
Obtain the Oracle instant client software that will work for your database. You will only need the basic package.
http://www.oracle.com/technetwork/database/features/instant-client/index-100365.html
Extract the contents to a temp location on your hard disk
Create a directory for the application – it could be anything, but here is what I used
C:\instantclient
Copy the extracted files into the directory you just created.
Right click on my computer and choose properties
Under advanced and environment variables you will need to add the directory you created above to the system variables PATH. You will need to create a new system variable called TNS_ADMIN and put the same c:\instantclient path in it.
Create the file tnsnames.ora under the c:\instantclient directory and put your customized entry in it. Below is an example.
tnsnams.ora file contents
<Alias for this tnsnames entry> =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = <Your Oracle Server>)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = <Your database instance>)
It’s a good idea to restart your system after this installation.
In web developer express use the .NET Framework Data Provider for OLE DB.
Here is the key piece of information!!
Under server name you need to use the alias from the tnsnames.ora file entry. If you do not do this it will not pick up the SERVICE_NAME parm and will give you some goofy error like:
ORA-12514: TNS:listener could not resolve SERVICE_NAME given in connect descriptor
or
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor -
Officejet not able to connect with MAC wirelessly but will connect to W7 PC
I have a 6700 Office jet and have it setup to print wirelessly with a W7 PC. The Mac will not connect to the printer wirelessly but will print via usb connection. Any hints?
Hi jecp,
It sounds like the router is not broadcasting the Bonjour protocol. The Mac uses Bonjour and the Windows uses DHCP. You may need to contact the Internet Service Provider (IPS), but you can try the steps below, I have seen success with a simple reboot.
Leave the printer on and unplug the power cable
Shut down the Mac, Click the Apple Icon and select Shut Down
Leave the router on and unplug the power cable, do not press any buttons
After one full minute, plug the router back in and wait for the lights to illuminate again and stedily
Plug the printer back in and wait for the wireless light to become solid
Turn the computer back on
Now try to add the printer to the Print and Scan in System Preferences.
Please let me know if this resolves the issue. I am happy to provide additional assistance if necessary.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Not able to connect to Essbase on VM through client on windows 7
Hi there,
I have installed OBIEE 11.1.1.5 - Sample Application (V107) (VM) and after running all the start up scripts like (startOID.sh,startWLS.sh,startBI.sh and startESSB.sh) and using opmnctl status I am able to see that it is alive in VM.
But when I try to access the VM from essbase studio client on windows I get the error "Network communication with the server failed. Check your network connection and try again.
Connection refused: connect".
I am very new to ESSBASE and its quite urgent.
Appericate your help.
Regards,
Pushpesh Pallav.Hi,
Add the property in server.properties file in Essbase studio with the below line
server.essbase.streamingCubeBuilding=true
and restart the Essbase Studio server as an administrative user.
If the issue still exists, then verify the server properties for the catalog
Hope it helps..
KosuruS -
Most of the question is in the discussion header. I have a Tango TRX bluetooth speaker that worked fine for three weeks with my third generation iPad. I started having trouble connecting and recieved the "not supported by iPad" message. It connects just fine until I open any app that requires sound and at thet point I recieve the message and the device disconnects. The Tango still pairs flawlessly with my laptop which is not an Apple product. How could a product suddenly become unsupported?
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer. -
Playbook not able to connect to Mac
I am having major problems with connecting my playbook to my MAC to share music etc...
When attempting to connect via USB there is an error message saying "The computer cannot communicate with the device" and says that to communicate with the device, you need to configure the "RIM network device" interface. And the button says open network preferences. I have no clue what to do from here
I also tried to connect it via wifi... I went to connect to server and typed in SMB:\\and the device ip address however another error message pops up saying "connection failed". It says the server smb may not exist or it is unavailable...
Any help would be appreciated!!!Hey jake_b,
Have a look at these two articles, they should help you out.
How to transfer files to and from the BlackBerry PlayBook
How to synchronize media from a computer to a BlackBerry PlayBook
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
Not able to connect apple store
with my ipod touch 5.1.1 I am not able to connect apple store or itunes through wifi, is there any issues with mtu value for this problem.
Try here:
Can't connect to the iTunes Store
Or it could be a temporary Apple problem -
HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIMES IT STOPS DOWNLOADING AND SHows THAT "UNABLE TO DOWNLOAD THIS APP" IT'S SHOWING THIS MESSAGE IN EVERY APP AND ALSO AT ITS DISTURBING ME AT THE TIME OF WATCHING ANY VIDEOS TOO. BECAUSE WHEN I AM TRYING TO WATCH ANY VIDEO IN YOUTUBE IT'S DISTURBING VIDEOS ARE NOT PLAYING ND SOUNDS ARE NOT COMING PROPERLY ND THE IMAGE QUALITY ALSO BECOMES POOR AND THE VIDEO STOPS AFTER SOME TIMES THIS PROBLEM IS HAPPENING AT ALL THE VIDEO ND IT'S HARASSING A LOT. THE SAME PROBLEM IS ALSO HAPPENING TO MY BROTHER'S PHONE TOO.. REQUEST TO APPLE PLEASE ANALYSE AND FIXED THE PROBLEM AS SOON AS POSSIBLE OR ELSE MAYB I NEED TO STOP USING APPLE PRODUCTS. CAUSE IT'S HARASSING MY DAILY LIFE A LOT....
These are user to user forums. You ARE NOT addressing Apple by posting here.
Also, why are you YELLING at us?? Stop using ALL CAPS.
What steps have you done to try and fix the problem?
Maybe you are looking for
-
I just purchased a new laptop and I am trying to transfer my iTunes library to my new laptop and Apple is saying Apple ID does not have permission to access iTunes Connect on my new laptop. How do I get my library transferred to my new computer? Ple
-
Please help me in writing this update statement UPDATE fro set ckey = (SELECT ckey FROM dcn WHERE EXISTS (select 1 from dro, fro where dro.rok = fro.rok and dcn.gcn = dro.gcn This returns ERROR at line 2: ORA-01427: single-row subquery returns more t
-
Need help in date conversion(it's Urgent)
I am reading data from the text file... and inserting that data into the oracle table(using bpel process) I have following problem with the date field. In the XSD file if i specify the date format as nxsd:dateFormat="ddMMyyyy" and when i pass null va
-
Any problems with installing Flip4Mac Player on iMac
Has anyone had issues with installing Flip4Mac Player to be able to listen to audio emails on iMac?
-
When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)" I have tried many many times and keep getting the same message. How do I resolve?