HT4064 I need help for a person with physical disabilities, a stylus type tool would help. Any ideas or product recommendation will be appreciated
I am looking for a stylus type tool to help a disabled person who has difficulty with their hands and fingers . Any suggestions will be appreciated.
http://www.techhive.com/article/1164440/macworld_buying_guide_ipad_styluses.html
Similar Messages
-
I am considering the iPod nano for a person with Parkinson's disease.....not sure if this is the right choice??? Help!!
I'd go with a Shuffle or a Classic.
-
Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks
You could try a SMC reset:
http://support.apple.com/kb/HT3964
If no change, do what Allan advises.
Caio. -
iO7 in good, but the fine lines of the characters are a nuisance. Is there a way to convince Apple to offer a thicker letter type for aging persons with limited vision?
I turned on Bold Text - the phone will restart itself, that's normal - and it is now MUCH easier on my eyes.
Give it a try. -
I have misplaced my iPod Touch 4th Generation. According to Find my iPhone, it should show up in offline mode. I need help on locating it with a software or some other way. Help?
There is no other way.
Sorry -
Can't download purchased video to my ipad, even though I paid for them on iPad, haven't got access to computer as I'm away from home, need to be able to download whole movie as internet In hotel is awful, any ideas would be great, originally I manage to download to episodes but haven't been able to with the remaining
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I'm trying to export a file as .dwg for Autocad but it's not showing the dwg preview and it appears to be saving as code (lots of gobbledegook when reopening the file). I'm on OS 10.5.8. Never had a problem with this before. What am I missing? Any ideas?
First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.
-
While deleting sms in a row one one ios 7 hang up and restart. This is happening in my iphone 4. Ps help. Not happy with update, it is extremely slow. Would request apple to provide an option of restoring it back to ios 6
I'm having same problem with my iPhone 4. Even after restoring twice. Simple tasks casue the phone to lock up and restart, which, thanks to iOS 7 takes much longer than with iOS 6.
I love my phone, but it is almost unsuable after update. -
I've been using IMac for 3 years with Microsoft office. Today, I could not open any excel files? Any Ideas?
If you upgraded to Lion or Mountain Lion, and did not upgrade to Office 2008 or later, that may be part of the problem. Try LibreOffice, OpenOffice, NeoOffice, Google Docs, or Zoho Docs. See my FAQ* for link: http://www.macmaps.com/crossplatform.html
-
I have problems interfacing Outlook 2011 for Mac with my email provider Cable and Wireless Guernsey. Any ideas? Don everything C&W suggest
OK I just transitioned to MacMail, iCal, and Mac address book. Goodbye Outlook, It was great for 18 years and painful for the last year. Microsoft is losing share with subpar software development.
-
Hi everybody, I am trying to create a DVD pal without menu with the program iDVD from a .mov file. Any ideas? Thanks so much.
(From fellow poster Mishmumken: )
How to create a DVD in iDVD without menu (there are several options):
1. Easy: Drop your iMovie in the autoplay box in iDVD's Map View, then set your autoplay item (your movie) to loop continously. Disadvantage: The DVD plays until you hit stop on the remote
2. Still easy: If you don't want your (autoplay) movie to loop, you can create a black theme by replacing the background of a static theme with a black background and no content in the dropzone (text needs to be black as well). Disadvantage: The menu is still there and will play after the movie. You don't see it, but your disc keeps spinning in the player.
3. Still quite easy but takes more time: Export the iMovie to DV tape, and then re-import using One-Step DVD.
Disadvantage: One-Step DVD creation has been known to be not 100% reliable.
4. (My preferred method) Easy enough but needs 3rd party software: Roxio Toast lets you burn your iMovie to DVD without menu - just drag the iMovie project to the Toast Window and click burn. Disadvantage: you'll need to spend some extra $$ for the software. In Toast, you just drop the iMovie project on the Window and click Burn.
5. The "hard way": Postproduction with myDVDedit (freeware)
Tools necessary: myDVDedit ( http://www.mydvdedit.com )
• create a disc image of your iDVD project, then double-click to mount it.
• Extract the VIDEO_TS and AUDIO_TS folders to a location of your choice. select the VIDEO_TS folder and hit Cmd + I to open the Inspector window
• Set permissions to "read & write" and include all enclosed items; Ignore the warning.
• Open the VIDEO_TS folder with myDVDedit. You'll find all items enclosed in your DVD in the left hand panel.
• Select the menu (usually named VTS Menu) and delete it
• Choose from the menu File > Test with DVD Player to see if your DVD behaves as planned.If it works save and close myDVDedit.
• Before burning the folders to Video DVD, set permissions back to "read only", then create a disc image burnable with Disc Utility from a VIDEO_TS folder using Laine D. Lee's DVD Imager:
http://lonestar.utsa.edu/llee/applescript/dvdimager.html
Our resident expert, Old Toad, also recommends this: there is a 3rd export/share option that give better results. That's to use the Share ➙ Media Browser menu option. Then in iDVD go to the Media Browser and drag the movie into iDVD where you want it.
Hope this helps! -
My serial number isn't working with the new Photoshop on a different computer. Any ideas?
You don't need a serial number for the latest version of Photoshop, just sign in with your Adobe ID
-
I have a xerox phaser printer which I want to connect to my mac book but each time it says there is no software to support the version of lion I have!
I have downloaded the software for the 10.7 but that hasnt helped... any ideas?? thanksYou will have to try the xerox website for the latest drivers for Mac OX system you are using
http://www.support.xerox.com/support/engb.html
It may be that your printer is not supported. You do not specify which model you have so unable to help further. -
Hi Everyone, I have tried all the solutions mentioned by apple and still have a white screen with a blinking file folder with a question mark in the center, anyone have any ideas or experienced this?
Nooo or you would use OS X Recovery Mode: Disk Utilty and then Startup Disk.
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718
ExpressLane
https://expresslane.apple.com/
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725 -
T43 – Model 1871-FU1: Will not boot with blank screen. Only Fan is running. Any ideas?
Solved!
Go to Solution.What lead_org is referring to is commonly known as "re-balling" which involves unsoldering the Southbridge chip from the planar, replacing all (6-700) solder balls with new ones and then re-attaching it under heat/pressure.
This is the place that you need:
http://www.theboardroom.info/index.html
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.
Maybe you are looking for
-
Problem in more than one Routines in Pricing Procedure
Hi, I have one pricing procedure. I have created two 971 & 981 routines (CalType) as per my requirements. The issue is that both the routines are not working correctly if they are assigned together is the pricing procedure. But if I assign any one of
-
How do i complain Apple service provider
I was angry about what service provider service! where can i complain directly? please help, thanks!
-
Master table for Qualification ID (In SERVICE Product)
Hi friends, Could you please help me out with master table for Qualification ID and its description? Thanks, Debasish
-
My phone's receiver doesn't work.This is factory error.Can I change?How much take?
-
dear gurus while creating a production order(CO01), in the master data tab the routing is not selected, while the prod version and BOM values are correctly copied from the master data. where can be the possible error. I have checked